An Investigation of Inclusion Complexes of Cyclodextrins with Phenylurea Herbicides by Photochemically-Induced Fluorescence. Analytical Applications

The effect of -cyclodextrin (-CD) and hydroxypropyl--cyclodextrin (HP--CD) upon the photochemically-induced fluorescence (PIF) properties of four phenylurea herbicides, including linuron, diuron, isoproturon and neburon has been studied. Photochemical conversion of these nonfluorescent herbicides into strongly fluorescent photoproducts was shown to occur in -CD and HP--CD aqueous media. The influence of pH, UV irradiation time and photoproduct stability on the fluorescence intensity was also investigated. In addition, the stoichiometry and formation constants of the complexes formed between herbicides and -cyclodextrin (-CD) or 2-hydroxypropyl--cyclodextrin (HP--CD) were determined. The formation constant values, ranging from 184 ± 40 to 1498 ± 245 M^-1, were calculated by applying the iterative nonlinear regression (NLR) approach to the PIF data. Linear calibrations graphs were established in the interval 1–12 g/mL, for diuron, linuron and neburon. The IUPAC limits of detection ranged between 580 and 700 ng/mL, according to the compound. Application to the analysis of phenylurea herbicides in spiked river water was also described.     

PEO／EVA共混物的结构研究

ＰＥＯ以分散相形式存在于ＰＥＯ／ＥＶＡ共混物中，且具有部分相容性。Ｘ－射线衍射谱表明ＥＶＡ含有较强的ＰＥ衍射峰；ＰＥＯ／ＥＶＡ共混物既表现出ＰＥ的衍射峰也含有ＰＥＯ的晶面反射。随着ＰＥＯ的Ｍｎ的增加，ＰＥＯ／ＥＶＡ的Ｗｃ、ｘ增大且于时获得最大值：ＰＥ０／ＥＶＡ的Ｗｃ、ｘ值比纯ＰＥＯ的Ｗｃ、ｘ明显降低。     

Synthesis of 2-chloro-1,1-difluoroallyl mesylates through novel rearrangement and CC bond formation by their Pd-catalyzed reaction with diethylzinc

Treatment of 2-chloro-3,3-difluoroprop-2-en-1-ol derivatives (2) with methanesulfonyl chloride in the presence of a base did not give the expected esters but 2-chloro-1,1-difluoroprop-2-enyl methanesulfonates (4) through a novel [3,3] sigmatropic rearrangement. Reaction of 4 with diethylzinc in the presence of tetrakis(triphenylphosphine) palladium gave 1-alkyl- or 1-aryl-2-chloro-3-fluoropenta-1,3-dienes in moderate to good yields through a CC bond formation followed by dehydrofluorination.     

棕榈油中脂肪酸的GC/MS定性分析

本文介绍了进口棕榈油中的脂肪酸的色-质联用分析方法。其中,特别检测了油中的奇碳数脂肪酸,并和其它食用油中的脂肪酸作了比较。     

TiO2／Ti／TiO2半导体隔片光电化学电池的性能

研究了半导体隔片光电化学电池(SC-SEP)中光池溶液的pH、暗池溶液的氧化还原电对以及两池中的暗电极对电池的开路电压、光生电压、短路光电流和光伏安特性的影响。对它们的影响机制进行了初步分析。通过合理选择电池体系,SC-SEP的性能可比单隔室的光电化学电池(PEC)优越。     

线性低密度聚乙烯在与丁苯橡胶的共混体系中的结晶行为

本工作采用DSC、X-射线衍射、小角激光光散射、偏光显微镜等手段,研究了线性低密度聚乙烯/丁苯橡胶共混体系中聚乙烯的结晶结构、平衡熔点和结晶动力学。     

Comparison of 6Mo/MCM-22 and 6Mo/ZSM-5 in the MDA process

A comparison of methane dehydroaromatization (MDA) on 6Mo/MCM-22 and 6Mo/ZSM-5 was carried out using a gas mixture of 90%CH₄, 2%CO₂ and 8%Ar as the feed. The results indicate that the stability of 6Mo/MCM-22 is better than that of 6Mo/ZSM-5. A detailed study reveals that the ability for coke accommodation and the retention of the shape selectivity for aromatics formation is responsible for the stability of a MDA catalyst. This revised version was published online in August 2006 with corrections to the Cover Date.     

水杨酸钴非等温热分解动力学研究

用热分析(TG/DTG)、X射线衍射(XRD)技术研究了固态物质水杨酸钴在空气中热分解的过程。热分析结果表明,水杨酸钴在空气中分两步分解,其失重率与理论计算失重率相吻合;XRD结果表明,水杨酸钴分解的终产物为Co3O4。用Friedman法和Flynn-Wall-Ozawa(FWO)法求取了分解过程的活化能E,并用多元线性回归和多元非线性回归法给出了可能的机理函数,由这些方法得到的动力学数据相互比较吻合。     

ICP-MS法快速测定丙烯腈/乙腈中的铁、铜

采用带八级杆碰撞/反应池(ORS)的电感耦合等离子体质谱法(ICP-MS),直接测定丙烯腈或乙腈产品中的Fe、Cu,标准加入法定量.结果表明,方法的线性范围宽,线性相关系数均大于0.999.2种元素的相对标准偏差均低于5%,加标回收率在90%~110%.该方法简便、快速、准确.     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.