阵列波导光栅解调系统光电集成中Si纳米线AWG的设计

设计了一种阵列波导光栅解调集成系统中的8通道Si纳米线阵列波导光栅波分复用器。根据材料的折射率设计了单模波导截面尺寸,利用光束传播法对所设计阵列波导光栅进行了模拟。结果表明,器件尺寸为200μm×219μm,远小于目前技术较成熟的硅基SiO2的尺寸,光功率分布符合高斯分布,信道间隔为1.8nm,串扰小于-21dB。对小尺寸AWG的设计具有参考意义。     

梯度磁场作用下光纤中磁流体光透射特性研究的建模与分析

对光纤中磁流体在梯度磁场作用下的光透射特性进行了研究,提出光纤中磁流体的光透射率变化主要来源于梯度磁场引起的磁流体密度分布变化。根据郎之万函数和流体理论,推导了光纤中磁流体在梯度磁场作用下的密度分布,并根据Beer-Lambert定律,得到磁流体光功率透射衰减和纳米粒子局部密度的关系,从而建立光纤中磁流体在梯度磁场作用下光透射特性的理论模型。进而对光纤中磁流体在不同梯度磁场作用下的光透射功率进行数值分析,得到不同磁场强度和磁场梯度下光纤中磁流体透射功率的变化规律。最后将数值分析的结果和实验数据进行对比,验证了模型的合理性, 同时也验证了梯度磁场作用下磁流体光透射功率的变化主要来源于磁流体密度分布变化的推论。     

原油含水率测量的光学计量仪

油井含水率是油田开发过程中的一个重要指标。光纤传感器具有体积小、重量轻、抗干扰能力强、实时、高效、准确等优点,将其应用于石油测井,有利于提高勘探效率。介绍测井应用中原油含水率计量仪的结构,分析了光纤传感器对混合液体含水率测量的基本原理。激光在弯曲光纤中的传输效率随外界混合介质折射率的变化而改变,根据光纤输出光功率的大小可以测量外界混合介质的组成成分。通过数值模拟,给出了光纤传感器中光束强度随混合液体含水率的变化现象,计算得到混合液体中含水率测量结果。结果表明,光纤传感器计量仪能实现0%～100%含水量的连续测量。最后基于数值模拟结果讨论了系统设计中的注意事项。     

基于CDMA的布拉格光纤光栅传感系统的仿真分析

讨论了光纤光栅传感系统中常用的复用技术及其限制,阐述了利用CDMA技术实现光纤布拉格光栅阵列波长解调的复用方式,对系统的原理和性能进行了理论分析。在此基础上通过MATLAB做了基于CDMA的光纤光栅传感仿真分析,仿真结果表明该方法能区分反射波长重叠的光栅,从而提高FBG网络复用的频带利用率。     

Stable single longitudinal mode erbium-doped silica fiber laser based on an asymmetric linear three-cavity structure

We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.     

Optical phase front control in a metallic grating with equally spaced alternately tapered slits

A technique capable of focusing and bending electromagnetic （EM） waves through plasmonic gratings with equally spaced alternately tapered slits has been introduced. Phase resonances are observed in the optical response of transmission gratings, and the EM wave passes through the tuning slits in the form of surface plasmon polaritons （SPPs） and obtains the required phase retardation to focus at the focal plane. The bending effect is achieved by constructing an asymmetric phase front which results from the tapered slits and gradient refractive index （GRIN） distribution of the dielectric material. Rigorous electromagnetic analysis by using the two-dimensional （2D） finite difference time domain （FDTD） method is employed to verify our proposed designs. When the EM waves are incident at an angle on the optical axis, the beam splitting effect can also be achieved. These index-modulated slits are demonstrated to have unique advantages in beam manipulation compared with the width-modulated ones. In combination with previous studies, it is expected that our results could lead to the realization of ootimum designs for plasmonic nanolenses.     

Mid-IR dual-wavelength difference frequency generation in uniform grating PPLN using index dispersion control

A novel widely tunable dual-wavelength mid-IR difference frequency generation （DFG） scheme with uniform grating periodically poled lithium niobate （PPLN） is presented in this paper. By using the temperature-dependent dispersion property of PPLN, the quasi-phase matching （QPM） peak for the pump may evolve into two separate ones and the wavelength spacing between them increases with the decrease of the crystal temperature. Such two pump QPM peaks may allow simultaneous dual-wavelength mid-IR laser radiations while properly setting the two fundamental pump wavelengths. With this scheme, mid-IR dual-wavelength laser radiations at around 3.228 and 3.548, 3.114 and 3.661, and 3.019 and 3.76 μm, are experimentally achieved for the crystal temperatures of 90, 65, and 30 ℃, respectively, based on the fiber laser fundamental lights.     

一种双段多层长周期光纤光栅光谱特性研究

长周期光纤光栅(LPFG)传感器具有非常广泛的应用价值,而有效解决物理量交叉敏感问题是其实用化的关键。基于LPFG对包层外介质折射率和厚度的敏感性,提出一种双段多层折射率横向分布结构的新型LPFG传感器的设计,并利用耦合模理论和传输矩阵方法分析了镀膜材料折射率、膜层厚度和镀层长度对新型LPFG传感器光谱特性的影响。软件仿真结果证明,这种LPFG由于结构设计上的特殊性,将使LPFG的谐振峰发生分裂,即一个透射峰分裂为两个。由于两个分裂峰对应力和温度的灵敏度不同,利用该结构的LPFG作为传感器,可以实现温度、应力等物理量的同步测量,从而解决LPFG传感器的交叉敏感问题。     

基于MIMO神经网络均衡的16QAM模分-波分复用相干传输系统

提出了一种基于神经网络的多输入多输出（MIMO）均衡器,并在大容量模分-波分复用通信系统中进行了实验验证。该系统基于6模掺铒光纤放大器实现了16通道波分复用双极化48 Gbaud 16阶正交振幅调制（16QAM）,在LP01、LP02、LP11a、LP11b、LP21a、LP21b六种模式上传输了100 km少模光纤（FMF）。为降低非线性的影响,在接收端数字信号处理中,采用基于多标签技术的MIMO神经网络均衡器,能够显著提升系统性能。实验结果表明,经100 km的FMF传输,MIMO神经网络均衡器的强大性能使得系统的比特误码率能满足15%软判决前项纠错阈值要求。     

空间太阳极紫外三波段成像光谱仪系统设计

太阳上层大气,即日冕、过渡区和色球,是由炽热的高度动态的磁化等离子体构成,其中高度电离的离子发射出丰富的极紫外谱线。空间太阳极紫外光谱成像观测对于捕获太阳上层大气中爆发活动的动态物理演化过程,以及实现对大气等离子体特征参数的精确测量具有重要的意义。然而现有的极紫外光谱成像仪器只能针对太阳上层大气的一个或两个目标区域进行成像观测,缺乏采用单一仪器对整个太阳上层大气区域在大空间和宽波段尺度范围内的光谱进行诊断的能力,严重制约了人们对太阳爆发活动中的能量及物质输运过程的理解。为了利用单个仪器实现对日冕、过渡区和色球的高分辨率同时诊断观测,本文提出并设计了一款同时工作在17～21 nm、70～80 nm和95～105 nm三个波段的太阳极紫外成像光谱仪,该仪器基于非罗兰圆结构下的椭球面变线距（EVLS）光栅像差校正理论,采用狭缝扫描式成像光谱结构,实现了具有大离轴狭缝视场的高空间、高光谱分辨的消像散光谱成像。基于蒙特卡罗统计模拟方法对太阳极紫外三波段成像光谱仪的最优模型开展光线追迹仿真实验,仿真结果表明,所设计的成像光谱仪取得了良好的光栅像差校正效果,系统空间分辨率优于0.6″,光谱分辨率在1...