油浆高温快速裂解过程的气固相产物研究

采用高频炉快速热解装置研究油浆的高温快速热解特性,考察了热解温度、氮气流量对气固相产物的组成和产率的影响。温度是影响气相产物产率的关键因素,气相产物主要为甲烷、氢气和乙烯,升高温度可提高甲烷和氢气的产率,而乙烯产率受高温下二次反应的影响在800℃到达最大值后逐渐降低,乙烷、丙烯产率较小且受二次反应的影响在700℃到达最大值后逐渐降低,温度高于800℃时会有少量乙炔生成且升温可提高乙炔产率。增加氮气流量可降低甲烷、氢气分压,缩短乙烯、丙烯等在高温区的停留时间,从而增加气相产物的产率。积炭产率随热解温度升高迅速增加,氮气流量的增加能够削弱二次反应从而降低积炭产率。     

聚左旋乳酸/聚消旋乳酸共混物的结晶行为

非晶态聚消旋乳酸(PDLLA)对PLLA的结晶行为有较大的影响。本文利用差示扫描量热仪(DSC)和偏光显微镜(POM)对不同分子量PLLA、PDLLA按不同比例制得的共混物结晶进行了系统研究。结果表明随PDLLA含量的增大PLLA冷结晶温度升高,且越接近熔融温度。PDLLA分子量较小时PLLA球晶特征被明显破坏,PDLLA分子量较大时PLLA更易形保持球晶特征且易形成环带球晶形貌,这与结晶速率与非晶组分的扩散速率匹配程度有关。低分子量的PDLLA使PLLA的最大生长速率对应的温度出现在较低温度。     

高碳烃宽温度范围燃烧机理构建及动力学模拟

发动机中燃料点火特性以及燃烧能量的释放对于发动机设计具有非常重要的作用,为了提高燃料的燃烧效率以及减少燃料在燃烧过程中污染物的排放,基于反应动力学机理对燃料燃烧过程的模拟就显得十分必要。因此需要更加深入的认识碳氢燃料的燃烧机理,探索其在燃烧过程中十分复杂的化学反应网络。为了发展能够适用于实际燃料多工况条件(宽温度范围、宽压力范围和不同当量比)燃烧的燃烧机理,基于碳氢燃料机理自动生成程序ReaxGen构建了正癸烷燃烧详细机理(包含1499个物种,5713步反应)和正十一烷燃烧详细机理(包含1843个物种,6993步反应)。详细机理主要由小分子核心机理和高碳烃类(C5以上)机理两部分组成。为了验证机理的合理性与可靠性,本文对于高碳烃燃烧新机理在点火延时时间以及物种浓度曲线进行了动力学分析,并与实验数据及国内外同类机理进行了对比,结果表明本文提出的正癸烷和正十一烷燃烧新机理在比较宽泛的温度、压力和当量比条件下都具有较高的模拟精度,为发展精确航空煤油燃烧模型提供了基础数据。同时考虑到详细机理的复杂性以及机理分析的计算量大和时耗长,本文基于误差传播的直接关系图形(Directed Relation Graph with Error Propagation,DRGEP)方法简化得到的包含709组分2793反应的正癸烷和包含820组分3115反应的正十一烷简化机理,使用DRGEP方法时所采用的数据点选自压力范围从1.0×10~5 Pa到1.0×10~6Pa,当量比范围从0.5到2.0,初始温度范围从600到1400时恒压点火的模拟结果在点火延迟时间附近区域的抽样,同时在正癸烷机理简化中选取正癸烷、O_2和N_2作为初始预选组分,正十一烷的机理简化中主要选取正十一烷、O_2和N_2作为初始预选组分,得到的简化机理在比较宽泛的条件下的预测结果与详细机理吻合很好。最后结合敏感度分析方法分析了正癸烷和正十一烷的点火延迟敏感性,考察了机理中影响点火的关键反应。结果表明:这些机理能够合理描述正癸烷和正十一烷的自点火特性,在工程计算流体力学仿真设计中有很好的应用前景。     

ZnO纳米棒阵列到纳米管结构的自转化机制及其在相变封装材料中的应用

In the emerging field of nanoscience, tubular structures have been attracting remarkable interest due to their well-defined geometry, high specific area, and exceptional physical and chemical properties. Among them, oriented ZnO tubular arrays are regarded as promising candidates for various applications such as optoelectronics, solar cells, sensors, field emission, piezoelectrics, and catalysis. Although template-directed and selective dissolution synthesizing strategies are commonly used to prepare ZnO nanotubes, repeatability and large scale preparation are still challenging. In this study, ZnO nanotube arrays were controllably prepared by tuning the hydrothermal parameters, without the use of any additives. The mechanism underlying the self-conversion of ZnO nanorods to nanotubes was comprehensively studied based on the surface energy theory. It has been proved that the metastable top surface of the ZnO nanorods dissolves preferentially to reach a stable state during the hydrothermal growth. The specific surface energy of different crystal faces of ZnO nanorods was calculated using molecular dynamics simulation. The top surface of the ZnO nanorod, the Zn-terminated [0001] face, demonstrated much higher surface free energy than did the lateral faces, which indicated that the self-dissolution of top face (002) is energetically favorable. The self-conversion behavior of ZnO nanorod arrays with different diameters was specifically investigated by adjusting the initial precursor concentration, density of the crystal seed layers, and growth time. The dissolution-crystallization equilibrium concentration, determined by crystal surface energy, was found to be a key factor for the formation of the tubular structure. Notably, the critical equilibrium conditions for the self-conversion of ZnO nanorods to nanotubes, including zinc ion concentration and pH, have been identified by studying parameters corresponding to the dissolution-crystallization equilibrium for the metastable top surface of the ZnO nanorods. The preparation of the ZnO nanotube arrays was successfully accelerated and simplified via two-step procedure: (1) preparation of ZnO nanorod arrays and (2) self-conversion of ZnO nanorods to nanotubes. The preparation method based on the self-conversion mechanism from rods to tubes for polar oxides is simpler and more easily controllable as compared to the reported methods involving variety of additives. Because of the advantages of adaptability to a wide range of substrates, excellent conducting properties, and filling ability, the prepared ZnO nanotube array films were used in encapsulating phase-change materials. The encapsulated phase-change material exhibited excellent heat storage/release properties and heat conductivities. This indicates the potential application of precision devices for temperature control.     

低温纳米复合相变蓄冷材料热物性研究

低温相变蓄冷的关键是蓄冷材料的开发.本文针对啤酒工艺对冷源温度的要求,选择BaCl2共晶盐水溶液为相变蓄冷材料基液,在基液中添加粒径为20nm的TiO2纳米粒子,形成具有蓄冷功能的纳米复合材料.对其热物性如导热系数、相变潜热、相变温度、过冷度及粘度进行了实验测量和分析.结果表明,在TiO2纳米粒子的质量分数为1%的情况下,纳米复合蓄冷材料的导热系数比基液提高了11.28%,过冷度从3.97℃降为1.21℃,同时粘度增加了21.7%,相变潜热略有降低.     

提高气冷涡轮气热耦合计算精度的措施

温度场计算的准确性对气冷涡轮的设计影响极大.实际的气冷涡轮在运行状态下,存在多种物理现象:冷气带来的燃气组分变化、湍流、转捩、温度边界层的发展变化、热辐射等.而在数值计算中,计算结果也要受到网格质量的影响.采用自编程序、商业CFD软件对某两级气冷涡轮、C3X以及MARK Ⅱ叶片进行计算,分别描述冷气组分变化、计算网格、湍流模型以及转捩温度场模拟精度的影响;同时定性分析温度边界层复合性质与辐射换热对温度计算的影响.得出在气热耦合计算中,考虑上述因素的影响是很有必要的.     

太阳能热气流系统内传热与流动的实验模拟

构建了小尺寸太阳能热气流发电的实验模型,测定了系统的温度随时间和空间的分布,测定了烟囱内的速度随时间的变化关系.实验结果表明:集热棚内温度分布和季节对系统传热与流动特性的影响符合理论分析结果,而由于烟囱较薄,散热较高,在烟囱内的温度降低显著.     

微通道介电泳颗粒流动中的焦耳热分析

微通道中的介电泳颗粒流动是芯片实验室装置的最重要应用之一.生物和医学领域的实际应用中,为获得足够的介电泳颗粒控制能力,在高电导率的电解溶液上施加强电场,而这将引起溶液温度的明显升高.本文建立了介电泳颗粒流动中的电场分布和焦耳热效应的理论模型.对介电泳微通道中电解溶液中的电场与温度场进行了计算,分析了介电泳作用下产生的焦耳热对微通道内温度场的影响.