新型的钛基Ni-Sn/Ti电极的制备及对甲醇氧化反应的电催化活性

利用电热法,一步制备出新型的钛基Ni-Sn/Ti电极(Ni8Sn/Ti, Ni7Sn3/Ti 和 Ni/Ti)。扫描电镜（SEM）图像表明,催化剂以片状的纳米颗粒形式沉积于钛基体上。利用电化学伏安技术、电位阶跃法和电化学交流阻抗谱（EIS）,研究了这些电极在1mol.L�1NaOH溶液中对甲醇氧化反应的电催化活性。研究表明,与Ni7Sn3/Ti,Ni/Ti以及多晶镍电极相比,Ni8Sn/Ti电极对甲醇氧化反应表现出更高的阳极氧化电流和更低的起始电位。EIS分析表明,在本文所考察的阳极电位和甲醇浓度下,Ni8Sn/Ti电极对甲醇氧化反应显示出极低的电荷传递电阻。结果表明,这种新型的钛基Ni8Sn/Ti电极对甲醇氧化反应具有极高的电催化活性。     

Effects of CO2 content on the activity and stability of nickel catalyst supported on mesoporous nanocrystalline zirconia

The effects of carbon dioxide content on the catalytic performance and coke formation of nickel catalyst supported on mesoporous nanocrystalline zirconia with high surface area and pure tetragonal crystalline phase were investigated in methane reforming with carbon dioxide. The samples were characterized by XRD, BET, TPR, TPO, TPH, TEM, and SEM techniques. The catalyst prepared showed high surface area and a mesoporous structure with a narrow pore size distribution. The obtained results revealed that the increase in CO2 content increased the methane conversion and stability of the catalyst and significantly reduced the coke deposition. The TPH analysis showed that several species of carbon with different reactivities toward hydrogenation were deposited on the spent catalysts employed under different CO2 contents.     

Selective catalytic methanation of CO in hydrogen-rich gases over Ni/ZrO2 catalyst

Ni/ZrO2 catalysts were prepared by the incipient-wetness impregnation method and were investigated in activity and selectivity for the selective catalytic methanation of CO in hydrogen-rich gases with more than 20 vol% CO2. The result showed that Ni loadings significantly influenced the performance of Ni/ZrO2 catalyst. The 1.6 wt% Ni loading catalyst exhibited the highest catalytic activity among all the catalysts in the selective methanation of CO in hydrogen-rich gas. The outlet concentration of CO was less than 20 ppm with the hydrogen consumption below 7%, at a gas-hourly-space velocity as high as 10000 h-1 and a temperature range of 260 °C to 280 °C. The X-ray diffraction （XRD） and temperature programmed reduction （TPR） measurements showed that NiO was dispersed thoroughly on the surface of ZrO2 support if Ni loading was under 1.6 wt%. When Ni loading was increased to 3 wt% or above, the free bulk NiO species began to assemble, which was not favorable to increase the selectivity of the catalyst.     

Ni^2＋／TiO2介孔材料光催化降解造纸废水影响因素的研究

溶胶-凝胶法合成了不同Ni掺杂量的Ni2 /TiO2介孔复合材料.用X射线衍射(XRD)、透射电子显微镜(TEM)、红外(FT - IR)光谱和N2吸附脱附等对产物结构进行了表征.考察了Ni掺杂量、催化剂的用量、初始pH、外加氧化剂等因素对光催化降解造纸废水的影响.结果表明: Ni2 /TiO2介孔复合材料光催化降解造纸废水的最佳反应条件为:Ni掺杂量为2%、催化剂用量1.5g/L、初始pH=4、通氧;光照4 h后,废水色度去除率达100%; 12 h后,废水CODCr去除率达到83.4%.     

A Facile Solvothermal Synthesis of Monodisperse Ni Nanoparticles

A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of （3.5±0.5） nm. The FTIR spectrum reveals that the nanoparticles are coated with oleic acid. In the synthetic process, N2H4·H2O was used as a reducing agent and oleic acid as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.     

Synthesis and Soft Magnetic Properties of Mg-doped Ni Nanoparticles

Mg-doped Ni nanoparticles with good soft magnetic properties were prepared with the sol-gel method and were sintered at 400, 500, 600, and 900℃ in argon atmosphere, respectively. The structure and magnetic properties of the samples were studied by means of X-ray diffraction, TEM, and VSM magnetometers. X-Ray powder diffraction results show that Ni-Mg solid solution was formed with the single phase of face-centered cubic（fcc） structure. The particle size became larger with the increase of temperature. When the sintering temperature was 400 °C, the particle size was 6.3 nm, whereas it was 46.2 nm at 900 °C. Both the saturation magnetization（Ms） and the coercivity were enhanced with the increase of the particle size. The Ms values of the samples ranged from 18.965 to 46.766 emu/g and the coercivity ranged from 1051.3568 to 9145.0848 A/m.     

Square planar complexes of Cu(II) and Ni(II) with N<Subscript>2</Subscript>O donor set of two Schiff base ligands: synthesis and structural aspects

Abstract Two new square planar Cu(II) and Ni(II) complexes, [CuL¹(NCO)] (1) and [NiL²(N₃)] (2) have been synthesized with two different tridentate N₂O donor Schiff base ligands L ¹ H (1:1 condensation product of benzoylacetone and 2-diethylaminoethylamine) and L ² H (1:1 condensation product of benzoylacetone and 2-dimethylaminoethylamine), respectively. Both the complexes 1 and 2 have been characterized by elemental analysis, IR, UV-Vis spectroscopy, room temperature magnetic susceptibility measurement, electrochemical, thermal, and single crystal X-ray diffraction studies. Structural studies reveal that in both the complexes metal centers have square planar environment with N₂O donor set of Schiff base ligands and terminal pseudohalide anions (isocyanate for 1 and azide for 2) at four coordination sites of square plane. Graphical abstract Square planar complexes of Cu(II) and Ni(II) with N ₂ O donor set of two Schiff base ligands: synthesis and structural aspects Subhra Basak, Soma Sen, Samiran Mitra, C. Marschner, W. S. Sheldrick Two new square planar Cu(II) and Ni(II) complexes, [CuL¹(NCO)] (1) and [NiL²(N₃)] (2) have been synthesized with two different tridentate N₂O donor Schiff base ligands L ¹ H and L ² H respectively. Both the complexes 1 and 2 have been characterized by elemental analysis, IR, UV-Vis spectroscopy, room temperature magnetic susceptibility measurement, electrochemical, thermal and single crystal X-ray diffraction studies.      

Chemo‐selective reduction of nitro and nitrile compounds using Ni nanoparticles immobilized on hyperbranched polymer‐functionalized magnetic nanoparticles

The nitro and nitrile groups in aromatic and aliphatic compounds containing various reducible substituents such as carboxylic acid, ketone, aldehyde and halogen are selectively reduced to the corresponding amines in water as a green solvent with excellent yields by employing NaBH₄ in the presence of Fe₃O₄@PAMAM/Ni(0)‐b‐PEG nanocatalyst. The morphology and structural features of the catalyst were characterized using various microscopic and spectroscopic techniques. The designed catalyst system because of it being covered with hydrophilic polymers is soluble in a wide range of solvents (e.g. water and ethanol) and suitable for immobilizing and stabilizing Ni nanoparticles in aqueous mediums. In addition, the catalyst can be easily recovered from a reaction mixture by applying an external magnetic field and can be reused up to six runs without significant loss of activity.     

TiO2/Ni3[Ge2O5](OH)4复合材料的制备及光催化性能

以Ni₃[Ge₂O₅](OH)₄为载体,氟钛酸铵为原料,采用水热辅助液相沉积法制备了纳米TiO₂/ Ni₃[Ge₂O₅](OH)₄复合材料。通过X射线衍射(XRD)、拉曼光谱分析(RM)、场发射扫描电子显微镜(FE-SEM)、高分辨透射电镜(HTEM)、紫外-可见吸收光谱(UV-Vis)等表征手段对样品的物相组成、结构特性及微观形貌做了检测分析,并且探究了不同二氧化钛负载量对纳米TiO₂/Ni₃[Ge₂O₅](OH)₄复合材料光降解亚甲基蓝能力的影响规律。结果表明,实验实现了纳米TiO₂与Ni₃[Ge₂O₅](OH)₄的紧密复合与有效分散,TiO₂为锐钛矿型结构,平均粒径20 nm。该复合材料能够有效抑制光生载流子的复合,改善材料的吸附性能,提高材料的光催化效率。当复合材料中TiO₂与Ni₃[Ge₂O₅](OH)₄的摩尔比为3.1∶1时,材料对亚甲基蓝的光催化效率最高,90 min亚甲基蓝的光降解率为99.81％。     

Characteristics of La-modified Ni-Al2O3 and Ni-SiO2 catalysts for COx-free hydrogen production by catalytic decomposition of methane

Hydrotalcite precursors of La modified Ni-Al₂O₃ and Ni-SiO₂ catalysts prepared by co-precipitation method and the catalytic activities were examined for the production of CO_x-free H₂ by CH₄ decomposition. Physico-chemical characteristics of fresh, reduced and used catalysts were evaluated by XRD, TPR and O₂ pulse chemisorptions, TEM and BET-SA techniques. XRD studies showed phases due to hydrotalcite-like precursors in oven dried form produced dispersed NiO species upon calcination in static air above 450 °C. Raman spectra of deactivated samples revealed the presence of both ordered and disordered forms of carbon. Ni-La-Al₂O₃ catalyst with a mole ratio of Ni : La : Al = 2 : 0.1 : 0.9 exhibited tremendously high longevity with a hydrogen production rate of 1300 mol_H2 ·mol^?1_Ni. A direct relationship between Ni metal surface area and hydrogen yields was established.