ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Ab initio potential energy surface and excited vibrational states for the electronic ground state of Li_2H

A 285-pomt multi-reference configuration-interaction involving single and double excitations ( MRS DCI) potential energy surface for the electronic ground state of L12H is determined by using 6-311G (2df,2pd)basis set.A Simons-Parr-Finlan polynomial expansion is used to fit the discrete surface with a x2 of 4.64×106 The equn librium geometry occurs at Rc=0.172 nm and,LiHL1=94.10°.The dissociation energy for reaction I2H(2A)→L12(1∑g)+H(2S) is 243.910 kJ/mol,and that for reaction L12H(2A')→HL1(1∑) + L1(2S) is 106.445 kl/mol The inversion barrier height is 50.388 kj/mol.The vibrational energy levels are calculated using the discrete variable representation (DVR) method.     

CrO3.CH3NH2.HCl／Al2O3的制备及其对苯偶姻体系的氧化反应

ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３的制备及其对苯偶姻体系的氧化反应张贵生＊石启增陈密峰蔡昆（河南师范大学化学系新乡４５３００２）关键词ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３，苯偶姻，苯偶酰，氧化１９９６－０８－１８收稿，１９９６－１１－０...     

混合高序铜法立体选择性合成（±）—EpilitsenolideC2

混合高序铜法立体选择性合成（±）┐ＥｐｉｌｉｔｓｅｎｏｌｉｄｅＣ２陈祖兴李焰＊黄精美黄锦霞徐章煌（湖北大学化学系武汉４３００６２）关键词烷叉基二氢羟基甲基（３Ｈ）呋喃酮，混合高序铜，立体选择性反应１９９６－０８－２８收稿，１９９７－０５－０６修回湖北...     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

1,3,2—氧氮磷杂环戊烷衍生物晶体结构研究

用X射线衍射方法测定了两个1,3,2-氧氮磷杂环戊烷衍生物的晶体结构:2-二乙氨基-3-(4′-甲基苯甲酰基)-2-硫代-1,3,2-氧氮磷杂环戊烷,C_(14)H_(21)N_2O_2PS(1),空间群为P_(bco),α=0.9057(5)nm,b=1.3974(6)nm,c=2.5130(7)nm,Z=8,R=0.051;2-二乙氨基-3-(2′,4′-二氯苯甲酰基)-2-硫代-1,3,2-氧氮磷杂环戊烷,C_(13)H_(17)N_2O_2PSCl_2(2),空间群P2_1/c,α=0.7375(1)nm,b=1.4370(3)nm,c=1.6015(7)nm,β=93.70(2)°,Z=4,R=0.054。结构均由直接法解出。两个化合物中氧氮磷杂五元环均为半椅式构象。其中P—N键长环内分别为0.1712(2)nm和0.1723(0)nn;环外为0.1620(3)nm和0.1620(0)nm,由于成环作用所致环内P—N键长大于环外的。     

簇合物[Fe（DMF）6][W2S6]的合成,结构和性能研究

以(NH_4)_2WS_4、FeCl_3和NaS_2CNC_5H_(10)为原料,合成出[Fe(DMF)_6][W_2S_6]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=0.8778(1)nm,b=0.9467(3)nm,c=1.1362(6)nm,α=71.506(1)°,β=74.775(2)°,γ=74.775(2)°,ν=0.84806nm~3,Z=1.晶体结构经块矩阵最小二乘法精修后,最终偏离因子R=0.0811.此外还进行了红外光谱、紫外可见光谱的测定.