Weight functions for interface cracks in dissimilar anisotropic materials

Bueckner‘s work conjugate integral customarily adopted for linear elastic materials is established for an interface crack in dissimilar anisotropic materials. The difficulties in separating Stroh‘s six complex arguments involved in the integral for the dissimilar materials are overcome and then the explicit function representations of the integral are given and studied in detail. It is found that the pseudo-orthogonal properties of the eigenfunction expansion form (EEF) for a crack presented previously in isotropic elastic cases, in isotopic bimaterial cases, and in orthotropic cases are also valid in the present dissimilar arbitrary anisotropic cases. The relation between Bueckner‘s work conjugate integral and the J-integral in these cases is obtained by introducing a complementary stressdisplacement state. Finally, some useful path-independent integrals and weight functions are proposed for calculating the crack tip parameters such as the stress intensity factors.     

薄壁离心钢管混凝土构件的稳定性研究

提出了圆锥形薄壁离心钢管混凝土构件任意截面综合抗弯刚度的简化计算公式和工程中常见的固定端约束条件下的临界压力计算公式     

用加权残值法求压杆的临界载荷

用加权残值法求压杆的临界载荷刘悦藏（河北工学院材料力学教研室，天津３００１３２）加权残值法是一种求解微分方程的方法。它不是严格地求微分方程的解析解，而是直接从微分方程得出问题的近似解。与其它数值法相比，它没有完全抛弃已有的理论解。由于此法原理简单、方...     

PREDICTION OF YIELD FUNCTIONS ON BCC POLYCRYSTALS

By the nonlinear optimization theory, we predict the yield function of single BCC crystals in Hill's criterion form. Then we give a formula on the macroscopic yield function of a BCC polycrystal Ω under Sachs' model, where the volume average of the yield functions of all BCC crystallites in Ω is taken as the macroscopic yield function of the BCC polycrystal. In constructing the formula, we try to find the relationship among the macroscopic yield function, the orientation distribution function (ODF), and the single BCC crystal's plasticity. An expression for the yield stress of a uniaxial tensile problem is derived under Taylor's model in order to compare the expression with that of the macroscopic yield function.     

平板网架结构分析的超级有限元法

本文给出一种二维矩形超级单元，用以分析平板网架结构，其做法是将大型平板网架结构离散成一系列矩形超级单元，考虑弯曲、剪切、挤压、拉压、翘曲等多种非经典变形效应，采用构件自由度向超级元自由度的转换把大型多构件问题的求解变为二维问题的求解，可大大减少未知量，又能保证精度，并可方便地与一般有限元软件连接。     

弹塑性梁在轴向应力波下的动态屈曲

本文考虑轴向应力波效应，利用分叉理论研究各种支承半无限长弹塑性梁的动态屈曲问题。在轴向阶梯载荷和脉冲载荷冲击下得到了梁的临界屈曲载荷及初始屈曲模态。其结果与实验现象相一致。同时也为研究结构动态屈曲问题提供了有效途径。     

各向异性材料相对周向应力断裂准则

本文提出用相对周向应力为参数，当其达到临界值时，裂纹开始扩展。扩展方向由相对周向应力为最大的条件确定。     

正交各向异性位势问题边界元法中几乎奇异积分的解析算法

几乎奇异积分的计算困难阻碍了边界元法的工程应用。本文针对二维正交各向异性位势问题边界元法中近边界点的几乎奇异积分,采用分部积分法,导出一种直接的解析计算公式。该解析公式可以精确计算线性单元上的几乎奇异积分。对二次单元,可将其细分为几个线性元,采用该解析公式近似计算其边界积分。当内点离当前积分单元较远时,仍保持常规高斯数值积分模式;而当内点离其较近时,因常规高斯积分结果失效,则采用该解析积分取代高斯数值积分。数值算例证明了该算法的有效性和精确性。二次元计算结果比线性元计算结果更精确。     

正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

不同边界条件正交各向异性中厚板的振动与稳定分析

本文采用高阶剪切变形理论对正交各向异性中厚矩形板进行振动与稳定分析,数值计算采用样条有限点法,得出了六种不同边界条件矩形板的自振频率和屈曲载荷,并与相应的经典板理论的结果进行比较.结果说明横向剪切变形对复合材料层合板的影响与板的各向异性程度、板的宽厚比(b/h)、层合板的层数和板的支承条件有关,它随着层合板各向异性程度的增加而增加,随着层合板宽厚比的增加而逐渐消失.