GROWTH AND DISTORTION THEOREMS FOR ALMOST STARLIKE MAPPINGS OF COMPLEX ORDER λ

In this article, the sharp growth theorem for almost starlike mappings of complex order λ is given firstly. Secondly, distortion theorem along a unit direction is also established as the application of the growth theorem. In particular, using our results can reduce to some well-known results.     

L\"{u}roth展式中数字和的快速增长速度[英文]

我们研究L\"{u}roth展式中数字和的快速增长速度,并证明相关水平集的Hausdorff维数是满维的.     

甲磺酸培氟沙星与氯冉酸的荷移反应

利用甲磺酸培氟沙星与氯冉酸在甲醇介质发生荷移反应,建立了荷移分光光度法测定甲磺酸培氟沙星含量的方法。结果表明,荷移反应生成1∶1型配合物,最大吸收波长为530nm,甲磺酸培氟沙星线性范围为2.25×10-8—3.38×10-6mol/L浓度内,回收率为98.7%—101.4%。     

First-principles study on the geometric and electronic structures and phase transition of PbZr1-xTixO3 solid solutions

With first-principles virtual-crystal approximation calculations, we systematically investigate the geometric and elec- tronic structures as well as the phase transition of lead zirconate titanate (PbZr1-xTixO3 or PZT) as a function of Ti content for the whole range of 0 ≤ x Ti ≤ 1. It can be found that, with the increase of the Ti content, the PbZr1-xTixO3 solid solu- tions undergo a rhombohedral-to-tetragonal phase transition, which is consistent with the experimental results. In addition, we also show the evolution in geometric and electronic structures of rhombohedral and tetragonal PbZr1-x TixO3 with the increasing content of Ti.     

Large-Quantity Synthesis of Single-Crystalline Metal Indium Nano/Sub-Micron Wires

Large quantities of metal indium single-crystalline wires with diameters ranging from tens of nanometres to a few micrometres were synthesized on Si substrates. Unlike traditional methods for the fabrication of nanowires or nanorods, liquid indium was squeezed out of the pores and cracks from porous an InAlN layer to form the wires. Continuous pushing out of liquid metal indium under strength, lowering of liquid-solid interfaces and the confinement of the cracks all contribute to the growth of indium wires. Our experiments have shed some light on the possibility of synthesizing large quantities quasi-1D nano/sub-micron structures with specified cross-sectional geometry using the similar method.     

三段加热系统对大尺寸MPOF预制棒一步拉伸工艺

采用自行设计的微结构聚合物光纤专用拉丝系统对大尺寸微结构聚合物光纤预制棒的一步拉伸工艺进行了研究.该微结构聚合物光纤加热系统采用三段式梯度加热,可保持炉内温度的控制准确度在±2℃以内.在保持送料速度与牵引速度恒定、协调的条件下,通过对温度场温度梯度控制优化,确定了最佳拉丝温度组合,并得到了直径规格310 μm、标准偏差为±20 μm的较高质量的微结构聚合物光纤.     

Direct visualization of structural defects in 2D semiconductors

Direct visualization of the structural defects in two-dimensional (2D) semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties, but is challenging. Although traditional atomic resolution imaging techniques, such as transmission electron microscopy and scanning tunneling microscopy, can directly image the structural defects, they provide only local-scale information and require complex setups. Here, we develop a simple, non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale, including both point defects and grain boundaries. Utilizing this method, we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples, providing key insights into the device functions. Furthermore, the etching method we developed is anisotropic and tunable, opening up opportunities to obtain exotic edge states on demand.     

环境规制强度影响能源效率的门槛效应研究——基于PSTR模型

利用非径向-SBM和CCR模型测算了我国30个省市(暂不包括西藏和港澳台地区)2007-2016年间的环境规制强度以及能源效率,构建面板平滑转移回归模型(PSTR),分析了环境规制强度对我国能源效率的连续非线性变化的影响.研究结果显示,全国环境规制强度对我国能源效率存在非线性效应,二者之间呈倒“U”型关系.环境规制强度小于门槛值0.6376时,环境规制对能源效率产生创新补偿效应,当环境规制强度高于门槛值0.6376时,环境规制对能源效率产生遵循成本效应.而我国东西部地区的环境规制强度与地区能源效率间却存在着与之相反的“U”型效应.     

基于Ni-SnO2纳米颗粒的GS-PUF设计

气敏传感器具有气体识别、探测和监测等功能, 广泛应用于工业生产等领域, 但在泄漏预警时缺乏迅速识别和定位等功能. 本文基于传感器制备工艺偏差分析, 通过对传感器气敏机制的研究, 提出一种基于Ni-SnO2纳米颗粒的气敏传感器物理不可克隆函数(Gas Sensor-Physical Unclonable Function, GS-PUF)设计方案. 该方案利用掺杂Ni元素的方法, 结合静电喷雾沉积技术制备Ni-SnO2气敏传感器, 以获取更加稳定可靠的物理特征值, 然后采集气敏传感器对不同浓度下气体的响应数据, 最后利用随机阻值多位平衡算法比较不同组气敏传感器响应电信号值, 实现PUF数据输出. 制备每组样本可产生128位二进制数据的多组PUF样本, 进行对比实验. 结果表明, 所设计的GS-PUF具有气体泄漏源头识别定位的功能, 且随机性提升至99%, 唯一性达49.80%.     

S30408低温棘轮效应本构描述

S30408奥氏体不锈钢因其优异的力学性能和耐低温性能而被广泛用于制作LNG等低温罐车罐体的内容器。此类罐体的内容器在其支撑部位不但承受内压引起的恒定应力还会承受惯性载荷引起的交变应力，容易发生渐进的塑性应变累积即棘轮效应。但目前还缺乏有效预测S30408低温棘轮效应的本构描述。利用几种较为先进的本构模型对低温S30408奥氏体不锈钢棘轮应变进行模拟，发现这些本构模型存在循环初期过低预测和循环后期过高预测的缺点，并且这种过高预测会随着循环圈数的增加而增大。基于Ohno - Wang II模型，关联形变马氏体含量与各向同性强化与随动强化，并给出马氏体极限含量dL的演化规律，进而提出一种含马氏体相变的循环塑性本构模型。与其它模型相比，该模型能有效改善在循环初期预测值过低和后期预测值过高的情况，同时能够较好地预测循环加载过程中形变马氏体的含量。