Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

一种高灵敏度的桥型声表面波应变传感器*

为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器。首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系。根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比研究,在此基础上搭建受压弯曲微动平台开展实验研究,结果表明:在直梁构件受压弯曲应变测量时,Y34°切向的桥型声表面波应变传感器的应变灵敏度为1692 Hz/με,传统声表面波传感器应变灵敏度为1328 Hz/με,桥型声表面波应变传感器的应变灵敏度较传统声表面波应变传感器有明显提高。     

A Caputo–Fabrizio Fractional-Order Model of HIV/AIDS with a Treatment Compartment: Sensitivity Analysis and Optimal Control Strategies

Although most of the early research studies on fractional-order systems were based on the Caputo or Riemann–Liouville fractional-order derivatives, it has recently been proven that these methods have some drawbacks. For instance, kernels of these methods have a singularity that occurs at the endpoint of an interval of definition. Thus, to overcome this issue, several new definitions of fractional derivatives have been introduced. The Caputo–Fabrizio fractional order is one of these nonsingular definitions. This paper is concerned with the analyses and design of an optimal control strategy for a Caputo–Fabrizio fractional-order model of the HIV/AIDS epidemic. The Caputo–Fabrizio fractional-order model of HIV/AIDS is considered to prevent the singularity problem, which is a real concern in the modeling of real-world systems and phenomena. Firstly, in order to find out how the population of each compartment can be controlled, sensitivity analyses were conducted. Based on the sensitivity analyses, the most effective agents in disease transmission and prevalence were selected as control inputs. In this way, a modified Caputo–Fabrizio fractional-order model of the HIV/AIDS epidemic is proposed. By changing the contact rate of susceptible and infectious people, the atraumatic restorative treatment rate of the treated compartment individuals, and the sexual habits of susceptible people, optimal control was designed. Lastly, simulation results that demonstrate the appropriate performance of the Caputo–Fabrizio fractional-order model and proposed control scheme are illustrated.     

Preparation,Crystal Structure,and Thermal Decomposition of the Intriguing Five‐coordinated Compound [Cu(IMI)4Cl]Cl (IMI = Imidazole)

The intriguing multi‐ligand compound [Cu(IMI)₄Cl]Cl ( 1 ) with the ligand imidazole (IMI) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction and the crystallographic data showed that the compound belongs to the monoclinic P2₁/n space group [α = 8.847(2) Å, b = 13.210(3) Å, c = 13.870(3) Å, and β = 90.164(3)°]. Furthermore, the Cu^II ion is five‐coordinated by four nitrogen atoms from four imidazole ligands and a chlorine atom. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetric (TG‐DTG) analysis. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa's method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) were measured and calculated.     

Sensitivity analysis of the moments of the profit on an Income Protection Policy

The main purpose of this paper is to perform a sensitivity analysis where we quantify and analyse the effects on the mean of the profit on an Income Protection policy and two risk measures of changing the values of the transition intensities. All the calculations carried out are based on a multiple state model for Income Protection proposed in Continuous Mortality Investigation Committee (Continuous Mortality Investigation Reports 1991; 12 ). Within this model, we derive a formula for the mean of the profit, which enables to evaluate it more efficiently. In order to calculate the two risk measures we use the numerical algorithms for the calculation of the moments of the profit proposed by Waters (Insurance: Mathematics and Economics 1990; 9 :101–113). We carry out the sensitivity analysis considering two different situations: in the first situation, we update the premium rates used to calculate the moments of the profit, according to the changes in the values of the transition intensities; in the second one, we do not update the premium rates. Both analyses are of practical interest to insurance companies selling Income Protection policies. Copyright © 2009 John Wiley & Sons, Ltd.     

An expedient synthesis of ellipticine via Suzuki-Miyaura coupling

A simple and efficient total synthesis of ellipticine was developed via the Suzuki-Miyaura coupling of sterically sensitive 2-hydroxybenzeneboronic acid with a multifunctional aryl halide using Pd(OAc)₂ as a catalyst and Cu(OAc)₂·H₂O as an additive in DMSO/H₂O as a key step followed by double N-arylation and cyclization.     

Finite element and sensitivity analysis of thermally induced flow instabilities

This paper presents a finite element algorithm for the simulation of thermo‐hydrodynamic instabilities causing manufacturing defects in injection molding of plastic and metal powder. Mold‐filling parameters determine the flow pattern during filling, which in turn influences the quality of the final part. Insufficiently, well‐controlled operating conditions may generate inhomogeneities, empty spaces or unusable parts. An understanding of the flow behavior will enable manufacturers to reduce or even eliminate defects and improve their competitiveness. This work presents a rigorous study using numerical simulation and sensitivity analysis. The problem is modeled by the Navier–Stokes equations, the energy equation and a generalized Newtonian viscosity model. The solution algorithm is applied to a simple flow in a symmetrical gate geometry. This problem exhibits both symmetrical and non‐symmetrical solutions depending on the values taken by flow parameters. Under particular combinations of operating conditions, the flow was stable and symmetric, while some other combinations leading to large thermally induced viscosity gradients produce unstable and asymmetric flow. Based on the numerical results, a stability chart of the flow was established, identifying the boundaries between regions of stable and unstable flow in terms of the Graetz number (ratio of thermal conduction time to the convection time scale) and B, a dimensionless ratio indicating the sensitivity of viscosity to temperature changes. Sensitivities with respect to flow parameters are then computed using the continuous sensitivity equations method. We demonstrate that sensitivities are able to detect the transition between the stable and unstable flow regimes and correctly indicate how parameters should change in order to increase the stability of the flow. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity enhancement and matrix effect evaluation during summation of multiple transition pairs—case studies of clopidogrel and ramiprilat

Sensitivity enhancement via summation of multiple MRM transition pairs is gaining popularity in tandem mass spectrometric assays. Numerous validation experiments describing the assays for two model substrates, clopidogrel and ramiprilat, were performed. The quantitation of clopidogrel was achieved by the summation of transition pairs m/z 322.2 to m/z 212.0 and m/z 322.2 to m/z 184.0, while that of ramiprilat was achieved by the summation of transition pairs m/z 389.2 to m/z 206.1 and m/z 389.2 to m/z156.1. The use of summation approach achieved sensitivities of >2 fold for both compounds as compared with the reported single MRM transition pair assays. The validation experiments addressed some important assay development issues, such as: (a) lack of impact of matrix effect; (b) unequivocal verification of the percentage contribution of each MRM transition pair towards sensitivity; (c) sensitivity enhancement factor achieved by summation approach of MRM transition pairs; and (d) accurate prediction of quality control samples using summation approach vs a single MRM transition pair. In summary, the appropriateness of using two MRM transition pairs for quantitation was demonstrated for both clopidogrel and ramiprilat. Additionally, pharmacokinetic application of the MRM transition pair assays using a summation approach was established for the two compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011