Si1－xGex/Si量子阱发光材料的分子束外延生长及其结构研究

采用固源Si分子束外延,在较高的生长温度于Si(100)衬底上制备出Si1－xGex/Si量子阱发光材料。发光样品的质量和特性通过卢瑟福背散射、X射线双晶衍射及光致发光评估。背散射实验中观察到应变超晶格的反常沟道效应;X射线分析表明材料的生长是共度的、无应力释放的,结晶完整性好。低温光致发光主要是外延合金量子阱中带边激子的无声发射和横光学声子参与的激子复合。并讨论了生长温度对量于阱发光的影响。     

Effect of borohydride as reducing agent on the structures and electrochemical properties of Pt/C catalyst

In this paper, we found that boron deposited on the surface of support when sodium borohydride used as reducing agent during the preparation of Pt/C catalyst. The deposition of boron markedly reduces particle size of Pt, raises electrochemical active surface (EAS) area of catalyst and electrochemical activity for hydrogen evolution or oxygen reduction reaction (ORR) compared with which prepared using other reducing agents (hydrogen and formaldehyde).     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

A new insight into the understanding of the collapsed form of poly(N-isopropylacrylamide) molecules

Possible collapsed forms of poly(N-isopropylacrylamide) molecules are reviewed on the basis of first principle calculations. Various configurations and associated conformations are detailed. The calculated optimized structures exhibit different possibilities of creating networks of intra-molecular bonds of the hydrogen type. We show that the most remarkable one is able to form a local, self-saturated and well ordered helix. We also indicate in which direction the synthesis of the molecule should be oriented to improve its global behavior in term of hydrophobic/hydrophilic behavior.     

新疆酸浆宿萼总黄酮含量测定方法的研究

利用可见光及紫外分光光度法测定酸浆宿萼总黄酮含量,可见光分光光度法是以芦丁为参照品,硝酸铝作显色剂,在510 nm波长测定总黄酮含量.紫外分光光度法是以芦丁为参照品,在359 nm波长测定总黄酮含量.经过比较,认为紫外分光光度法是一种较理想的测定方法.     

裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.     

Comparative analysis of heterogeneous solid and soft materials by adsorption, NMR and thermally stimulated depolarisation current methods

Structural characterisation of such bio-objects as fibrinogen solution, yeast cells, wheat seeds and bone tissues has been done using two versions of cryoporometry based on the integral Gibbs-Thomson (IGT) equation for freezing point depression of pore liquids and the measurements by ¹H NMR spectroscopy (180-200 < T < 273 K) and the thermally stimulated depolarisation current (TSDC) method (90 < T < 273 K) of structured water. The IGT equation was solved using a self-consisting regularization procedure including the maximum entropy principle applied to the distribution function of pore size (PSD). Both methods give clear pictures of changes in the structural characteristics caused, e.g., by hydration and swelling of wheat seeds and yeast cells, coagulation and interaction of fibrinogen with solid nanoparticles in the aqueous media, and the human bone tissue disease.     

Andreev-Fano Effect in a Hybrid Normal-Metal/Superconductor Interferometer

We report on a new type of Fano effect, named as Andreev-Fano effect, in a hybrid normal-metal/supeeconductor (N/S) interferometer embedded with a quantum dot. Compared with the conventional Fano effect, AndreevFano effect has some new features related to the characteristics of Andreev reflection. In the Iinear response regime, the line shape is the square of the conventional Fano shape, while in the nonlinear transport, a sharp resonant structure is superposed on an expanded interference pattern, which is qualitatively different from the conventional Fano effect. The phase dependence of the hybrid N/S interferometer is also distinguished from those of all-N or all-S interferometers.     

A Tin(IV) Porphyrin with Two Axial Organometallic NCN‐Pincer Platinum Units

A tin(IV) porphyrin was combined with two axial NCN‐pincer platinum(II) fragments by utilizing the oxophilicity of the apical positions on the tin atom and the acidic nature of the NCN‐pincer platinum derived benzoic acid. The solid‐state structure determined by X‐ray crystallography revealed some close contacts between the pincer complexes and the meso‐p‐tolyl subsitutents of the porphyrin. It was shown by ¹H NMR spectroscopy that these close contacts were not present in solution and that this compound can potentially act as a novel building block for supramolecular architectures.