双周期圆截面纤维复合材料平面问题的解析法

结合双准周期Riemann边值问题理论与Eshelby等效夹杂原理，为双周期圆截面纤维复合材 料平面问题发展了一个实用有效的解析方法，获得了问题的全场级数解并与有限元结果进行 了比较. 该方法为非均匀材料的力学性质分析和复合材料等新材料的微结构设计提供了 一个有效的计算工具，也可用来评估有限元等数值与近似方法的精度.     

On the Solution of Mixed Problems in Linear Anti-plane Piezoelectricity

In the present paper we consider interior and exterior mixed boundary value problems of anti-plane shear in the static theory of linear piezoelectricity. Using the boundary integral equation method we reduce the problems to systems of singular integral equations with discontinuous coefficients to which the classical Nöether’s theorems on existence of the solution can be applied. This allows us to establish well-posedness results and to obtain integral solutions of the corresponding mixed boundary value problems for a rather general class of piezoelectric materials. Mathematics Subject Classifications (2000) 45E05, 45F15, 74F15.     

从自由试验提取约束结构模态

已有的“从自由试验提取约束结构模态”的动柔度法，仅适用于刚性支承情况．在工程中，弹性支承状态是常见的，为此，建立了这一情况下的提取方法．该方法具有普遍性，因为当支承刚度很大时，可得到刚性支承下的结果；当支承刚度很小时，便可获得工程中用橡皮绳悬吊结构后所测得的自由-自由试验模态．总之，当支承刚度为任何值时，用此方法都能提取到相应约束结构的满意试验模态参数．表明该算法是非常稳定的，对于工程应用至关重要．     

孔洞裂纹问题的一种数值方法

研究孔洞与裂纹的相互作用问题,通过把适于单一裂纹的Bueckner原理扩充到含有多孔洞多裂纹的一般体系,将原问题分解为承受远处载荷不含裂纹不含孔洞的均匀问题,和在远处不承受载荷但在裂纹面上和孔洞表面上承受面力的多孔洞多裂纹问题.于是,以应力强度因子作为参量的问题可以通过考虑后者来解决,而利用笔者提出的杂交位移不连续法,这种多孔洞多裂纹问题是容易数值求解的.算例说明该数值方法对分析平面弹性介质中孔洞与裂纹的相互作用既简单又有效.     

随机扰动的同宿分岔系统研究

利用一维扩展过程的奇点理论并结合能量包络的随机平均法，考查“隐藏在余维２分岔点之后”的同宿分岔系统受参激白噪声影响的分岔行为。     

Analysis of Wind Fluctuations Using the Orthogonal Wavelet Transform

This paper presents a study of velocity fluctuations occurring in the stably stratified atmospheric boundary layer over an Antarctic ice shelf. The approach is based on wavelet analysis which has advantages over conventional Fourier analysis. Two case studies are presented, comprising: pure turbulent flow and a large amplitude solitary wave.     

一种改进的分块隐式数值方法

提出了一种改进的分块隐式数值方法，在贴体坐标和交错网格下以逆变速度分量和压力Ｕ，Ｖ，Ｗ，ｐ为基本求解变量，由此克服了原分块隐式数值方法求解复杂边界流动时的困难．９０°弯管流动数值计算初步表明，本文提出的方法合理、可行     

Near-Boundary Stress Wave Field in Anisotropic Plates under Impulsive Load

The stress wave field and the behavior of waves near the free boundary in an orthotropic plate and at the interface between two anisotropic media are studied. The results presented were obtained using the dynamic photoelastic method and optically sensitive fibrous models. Experimental data for impulsively loaded plates with various boundary conditions are analyzed     

Computer computation of the method of multiple scales—dirichlet problem for a class of system of nonlinear differential equations

The method of boundary layer with multiple scales and computer algebra were applied to study the asymptotic behavior of solution of boundary value problems for a class of system of nonlinear differential equations. The asymptotic expansions of solution were constructed. The remainders were estimated. And an example was analysed. It provides a new foreground for the application of the method of boundary layer with multiple scales. Contributed by Jiang Fu-ru, Original Member of Editorial Committe, AMM Biography: Xie La-bing (1976∼); Jiang Fu-ru(1927∼)     

流形元法固定边界约束处理研究

在数值流形方法中,对于材料的固定边界,一般采用罚函数的方法进行处理,即在固定边界上设置刚性弹簧约束其位移来实现固定约束条件的近似满足。罚函数法在理论上不是严格的固定约束处理方法,罚弹簧的布置与弹簧刚度的大小对模拟的效果都会产生影响。基于流形单元上位移函数的组成提出了流形方法固定边界约束处理的新方法,在组成流形单元的物理覆盖上,通过取消相应的覆盖函数在流形单元位移函数中的组成来实现双向固定的约束条件,通过使用只包含单方向位移的覆盖函数使x向固定约束条件和y向固定约束条件得到实现,推导了相应固定约束条件下的流形单元刚度矩阵的数值计算格式。该方法严格满足固定约束的物理意义,简化了固定边界的处理,并经算例证明是有效和准确的,有利于数值流形方法的程序实现和工程应用。