Schottky Barrier Height Inhomogeneity of Ti／n—GaAs Contact Studied by the I—V—T Technique

The current-voltage characteristics of Ti/n-GaAs Schottky diodes measured over a temperature range of 78-299K have been interpreted on the basis of thermionic emission across an inhomogeneous Schottky contact.The experiment shows that the apparent barrier height (φap) increases from 0.437eV at 78K to 0.698eV at room temperature.the plot of φap versus 1/T does not exhibit a simple linear relationship over the whole temperature range,indicating that the barrier height distribution is more complicated than the frequently observed single Gaussian distribution.A new multi-Gaussian distribution model is developed.Our experimental results can be explained by a double Gaussian distribution of the barrier heights.The weight,the mean barrier height,and the standard deviation of the two Gaussian functions are 0.00001 and 0.99999,0.721 and 0.696,0.069 and 0.012eV,respectively.     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

1994年水下防务技术会议介绍

每年6—7月，北大西洋公约组织水下防务专家都要云集西欧，参加一年一度的水下防务技术会议和展览会，今年开会的地点是英国伦敦，从7月5日到7日举行了学术报告会和展览会，7月8日又举行了一天非公开的学术报告会．参加会议的不仅限于北大西洋公约组织的16国，还有日本，新加坡，马来西亚等国的代表．俄罗斯新近成立的武器装备进出口委员会也在展览大厅中设立了一个摊位．我作为会议参加者之一，参加了多种学术活动并观看了展览会，现就本次会议的主要情况作一介绍．水下防务技术③naerwateroefenseTee5nohyy，简称UDT）会议和展览会是北…     

乳化技术原子吸收光谱法测定汽油中的铅

本文以Span-80与Tween－20为复合乳化剂，将汽油分散成均匀的油水乳化液，可直接喷入空气－乙炔火焰中进行测定，本法简单快速，乳化液稳定时间长。回收率在97－103％之间，相对标准偏差在4％以内，本法测定结果与络合滴定法基本一致。     

电子直线加速器磁控管频率稳定的自适应线性神经元方法

 电子直线加速器电子束能量的稳定与否取决于功率源工作频率的稳定性,磁控管在短时间内的散谱和轻微跳谱造成稳频系统的控制精度下降,最后电子束的扫描均匀度下降。引入自适应线性神经元方法(ADALINE)和噪声对消技术以消除对工作频率长期稳定性的影响,从而保证了电子束的扫描均匀度。     

停流—荧光动力学分析法测定痕量钛的研究

利用自行组装的停流-荧光动力学分析仪,采用停流法汇合流体动力注入技术,研究了钛与3.5-二溴水杨基荧光酮的荧光增强动力学反应性质,讨论了流速、进样时间对方法灵敏度和精密度的影响,提出了一个快速、简便、精确测定钛的分析方法,并用于稀土样品及合成样品中痕量钛的测定.方法检测限为8×10~(-3)ppm,大多数元素的干扰均可用动力学方法消除.     

稳态锁模产生4ps激光脉冲

首次利用ＧａＡｓ光电导开关，控制Ｎｄ：ＹＬＦ激光器腔内Ｑ值，实现稳态锁模，获得脉宽和能量稳定性极高的４ｐｓ激光脉冲。     

Residual stress profiling of an aluminum alloy by laser ultrasonics

A residual-stress profile along the thickness of an aluminum alloy sheet is determined by laser-ultrasonic technique. Surface acoustic waves are generated by a Nd:YAG pulse laser and detected by a Heterodyne interferometer on a lateral free surface of the sheet. The distribution of residual stress is determined by measuring the relative variation of the wavevelocities at different location of the sample along its thickness. This technique is validated by three different residual stress profiles obtained experimentally.     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.