钼蓝分光光度法测定纯金中的硅

建立了钼蓝分光光度法测定纯金中硅量的方法。确定了基体的分离方法、分离条件、还原剂及其用量;考察了酸度,试剂等对测定的影响。在优化条件下对3个合成试样进行了测定,RSD10%。方法的回收率在97%~122%之间,满足测定的要求。方法适用于0.001%~0.005%的硅量的测定。     

水热法合成ZnS∶Au,Cu超细X射线发光粉

报道了水热法合成的高强度ZnS∶Au,Cu超细X射线发光粉及其光致发光(PL)和X射线激发发光(XEL)的光谱特性。200℃水热处理12h直接合成样品的纳米晶粒约15nm,尺寸分布窄,分散性好,具有纯立方相的类球形结构。氩气保护下1000℃焙烧1h后的样品存在一定的团聚,但团聚后尺寸为1～2μm,为超细X射线发光粉,此时样品为纯六角相的类球形为主的结构。所有样品的PL和XEL光谱均为宽带谱,水热法直接合成样品的XEL强度最强时,样品的Cu/Zn,Au/Cu比值分别为3×10-5和2。在此比值条件下,1000℃焙烧1h样品的XEL发光最强,此时其2个峰值分别位于445和513nm,且与未焙烧前相比强度增强了10倍左右。另外通过比较PL光谱与XEL光谱特性,讨论了PL和XEL光谱的发光机理和其不同的激发机制。     

A New Method for Separation of Hydrophobic Au Nanoparticles in the Reversal Micelle

In this article, a new method which not only can separate hydrophobic Au nanoparticles (NPs), but also obtain highly monodisperse NPs is discussed. A self‐made device of two same burettes, one of which was inserted into the other, was used for separating the nanoparticles by washing the reversal micelle. The effects of separation were characterized and analyzed by micrograph of transmission electron microscope (TEM), UV‐vis spectra, quartz crystal microbalance (QCM), and energy dispersive x‐ray analysis (EDX). It has been shown that, the smaller nanoparticles are, the easier they are to stay at the reversal micelle and the narrower the sizes are. This method can be applied to synthesize highly monodisperse Au NPs.     

胶体金纳米颗粒的荧光光谱特性

研究了胶体金纳米颗粒的荧光激发光谱和荧光发射光谱特性.增大激发光的波长,发射峰相应红移并在629nm达到最强,对应的灵敏激发波长为473nm.增加金纳米颗粒粒径,观察到发射谱的峰值先增大然后减小.发射峰产生的原因在于电子与带间空穴的复合导致非线性共振光散射.发射峰强度和金颗粒粒径的关系可以用表面等离子体震荡引起的局域场增强来解释,数值计算结果和实验结果能较好的吻合.     

Dynamics of gold clusters on amorphous carbon films induced by annealing in a transmission electron microscope

The change of the size distribution of Au clusters induced by annealing was studied in situ by transmission electron microscopy. Starting from statistically distributed Au clusters on a thin amorphous carbon film, “islands” are formed within a few months storage at room temperature, which consist of Au clusters with sizes <4 nm embedded in a thin Au film. These islands cover originally areas with sizes around 25 × 70 nm². If the temperature is increased in the transmission electron microscope two different processes can be clearly distinguished that lead to the coarsening of the cluster size distribution: cluster coalescence and (contactless) Ostwald ripening. The degree and rate of the coarsening are found to depend on the underlying surface (Au film or amorphous carbon) and the exposure to the high-flux high-energy electron beam, which can be estimated to lead to high-temperature excursions in a cluster on a 10⁻¹² s time scale. The experimental findings are confirmed by Monte-Carlo simulations using the many-body Gupta potentials in order to calculate the Au/Au interaction. Moreover, the results of MC simulations suggest an electron-beam induced formation of a “quasi-two-dimensional gas” of small highly mobile Au species on the Au film, which promotes Ostwald ripening.     

高灵敏度化学光谱法测定金、铂和钯

三正辛胺负载泡塑对贵金属有极强的吸附能力。本文通过对三正辛胺负载泡塑对金、铂、钯吸附性能的研究，以及NO3^-和Fe^3 离子干扰的消除，拟定了金、铂、钯的快速、简便、富集系数高的三正辛胺负载泡塑分离法，一次摄谱的测定范围（10g样品）为：Au0.1-5000ng/g；Pt0.2-5000ng/g；Pd0.1-1000ng/g。     

Ordered arrangement of 9-aminoanthracene on Au(1 1 1) surfaces: A scanning tunneling microscopy study

We present a scanning tunneling microscopy (STM) investigation of 9-aminoanthracene (AA) on the reconstructed Au(1 1 1) surface. The bare Au(1 1 1) surface shows the herringbone reconstruction which is conserved upon deposition of the organic molecules. Most of the AA molecules are found to decorate the regions of fcc-stacking of the gold surface where a periodic linear arrangement is observed. The orientation of the long molecule axis of individual molecules is along the -directions of the Au substrate. In addition, for individual domains of the surface reconstruction, one of the three possible orientations is preferred. On substrate areas which exhibit a high step density, the steps are completely decorated by AA molecules. A detailed analysis of the STM images reveals that the molecules are located on top terrace levels. The fine structure of individual molecules on the terrace shows a clear dependence on the tunneling voltage and resembles the molecular orbitals of the free AA molecule.     

金纳米粒子组装体的连续离散型纳米结构控制

采用柠檬酸钠还原氯金酸的方法,制备出粒径均一的金纳米粒子(AuNPs),通过加入二水合双(对-磺酰苯基)苯基膦化二钾盐(BSPP),增强了AuNPs体系的分散性与稳定性.选用直径为15和40nm的AuNPs,用不同序列巯基修饰的单链DNA连接到其表面,通过DNA链的杂交,形成不同结构的金纳米粒子组装体.通过改变加入DNA延长连接单元的比例,可以控制金纳米粒子组装体具有连续离散型的1∶1,2∶1和3∶1纳米结构.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Growth of cedar-like Au nanoparticles coating on an etched stainless steel wire and its application for selective solid-phase microextraction

A novel cedar-like Au nanoparticles (AuNPs) coating was fabricated on an etched stainless steel (SS) wire by direct chemical deposition and used as an efficient and unbreakable solid phase microextraction (SPME) fiber. The etched SS wire offers a rough surface structure for subsequent growth of AuNPs in chloroauric acid solution. As a result, the uniform cedar-like AuNPs coating with larger surface area was tightly attached to the etched SS wire substrate. The AuNPs coated etched SS fiber (AuNPs/SS) was examined for SPME of ultraviolet (UV) filters, phthalate esters and aromatic hydrocarbons coupled to high-performance liquid chromatography with UV detection. The fabricated fiber exclusively exhibited excellent extraction efficiency and selectivity for some aromatic hydrocarbons. Influential parameters of extraction and desorption time, temperature, stirring rate and ionic strength were investigated and optimized. The limits of detection ranged from 0.008 μg L⁻¹ to 0.037 μg L⁻¹. The single fiber repeatability varied from 3.90% to 4.50% and the fiber-to-fiber reproducibility ranged from 5.15% to 6.87%. The recovery of aromatic hydrocarbons in real water samples spiked at 2.0 μg L⁻¹ and 20 μg L⁻¹ ranged from 94.38% to 106.2% with the relative standard deviations below 6.44%. Furthermore the growth of the cedar-like AuNPs coating can be performed in a highly reproducible manner. This fabricated fiber exhibits good stability and withstands at least 200 extraction and desorption replicates.