利用侧链修饰寡聚DNA组装CdS有序纳米结构

由于 DNA分子具有特殊的结构和碱基配对特性 ,人们已经意识到利用 DNA分子将无机纳米粒子 (量子点 )组装成各种不同的有序纳米结构的可行性 [1～ 5] .如 Mirkin等 [6 ,7]利用端基修饰的寡聚 DNA将金纳米粒子组装成有序的六方堆积的层状结构 .Alivisatos等 [8]利用单链 DNA为模板 ,通过在 3′和5′端修饰巯基的互补 DNA将两个或三个金纳米粒子连接起来形成“人造分子”.本文中我们首次报道通过在侧链 ( 5′端 C1和 C2之间的磷酸根 )上修饰巯基的寡聚胞嘧啶 ( Oligo C10 - SH )和寡聚鸟嘌呤( Oligo G10 - SH)复性过程将 Cd S纳米…     

半导体纳米粒子与金纳米粒子间荧光共振能量转移研究

采用水相法合成的CdTe半导体纳米粒子作为能量给体, 通过Schiff碱反应将单链DNA连接到表面. 采用柠檬酸钠还原氯金酸法制取的Au纳米粒子作为能量受体, 通过Au—S键将单链DNA连接到表面. 通过DNA链间的杂交, 构建了荧光共振能量转移体系(FRET). 测定了CdTe-DNA、 探针体系和探针体系+目标DNA的荧光强度. 结果表明, 探针体系的荧光强度最弱, 加入目标DNA后, 体系荧光增强, 表明该体系的构建是成功的.     

基于金纳米颗粒的裂分型适配体传感器检测三磷酸腺苷

构建了一种基于金纳米颗粒(Gold nanoparticles,AuNPs)的裂分型适配体荧光传感器,用于检测三磷酸腺苷(ATP).将ATP核酸适配体序列分裂为P1和P2两个片段,在P1的5′端修饰荧光基团羧基荧光素(FAM),3′端巯基化修饰的P2通过Au—S键以自组装的方式修饰在AuNPs表面.未加入ATP时,P1...     

Lys-Lys诱导的金纳米粒子组装

尝试利用赖氨酸分子作为连接剂将金纳米粒子组装成有序的纳米结构．首先通 过赖氨酸的氨基与金纳米粒子的作用将其固定在粒子表面，然后通过氨基酸的缩合 将金纳米粒子连接成有序的纳米结构。透射电子显微镜观察表明形成的纳米粒子网 络结构中，相邻粒子之间的距离约为1．5m，与由两个赖氨酸缩合而成的二肽(Lys- Lys)长度相符．     

基于磁性纳米颗粒和金纳米粒子构建DNA电化学生物传感技术

本文构建了一种基于纳米粒子、茎环DNA和丝网印刷电极(SPCE)的电化学生物传感技术用于乳腺癌基因的快速、灵敏检测。该传感技术中,探针DNA的两端分别标记了巯基和生物素,巯基用于与金纳米粒子(AuNPs)作用,生物素用于与磁性纳米颗粒(MNPs)表面修饰的链酶亲和素作用以达到富集的目的,之后利用SPCE进行电化学检测。无目标DNA存在时,双标记DNA保持茎环结构,使得生物素分子很难和MNPs上的亲和素接触。一旦加入目标DNA,茎环结构打开,生物素得以与MNPs上的链霉亲和素发生特异性结合,形成的复合物(MNPs-DNA-AuNPs)通过磁性富集到SPCE表面,从而获得AuNPs的电化学信号。该DNA电化学生物传感对单碱基错配有良好的分辨能力,完全互补DNA的检出限为8.0×10-13 mol/L。     

基于DNA电化学发光传感器研究金纳米颗粒对量子点的电化学发光影响

纳米金颗粒具有高的消光系数和良好的表面等离子体共振特性, 其等离子体共振特性受纳米金颗粒的尺寸和周围环境等因素的影响. 本文基于半导体纳米晶电化学发光信号对金纳米颗粒的距离依赖性制备了DNA电化学发光传感器. 首先利用循环伏安法(CV)在玻碳电极(GCE)表面原位沉积金纳米颗粒(AuNPs), 巯基丙酸包裹的CdS量子点(QDs)与氨基修饰的双链DNA (dsDNA)通过酰胺键缩合, 形成量子点修饰的双链DNA(QDs-dsDNA). 最后将QDs-dsDNA 通过dsDNA 另一端的巯基组装到纳米金表面, 得到CdS QDs-DNA/AuNPs/GCE电化学发光传感器. 在优化电极表面QDs-dsDNA密度、金纳米颗粒沉积方法等实验条件的基础上, 对不同传感器的表面性质进行了表征, 如形貌和电化学阻抗等. 进一步通过控制纳米金和CdS QDs之间的DNA研究了纳米金对CdS QDs发光信号的影响作用. 结果显示DNA链的长度和类型对发光信号有着重要的影响. 最后将此传感器用于环境污染物的DNA损伤检测, 显示出很好的灵敏响应.     

纳米金颗粒增强信号的电化学生物传感器用于谷胱甘肽和半胱氨酸的检测

构建了一种高灵敏检测谷胱甘肽(GSH)和半胱氨酸(Cys)的新型电化学生物传感器. 先将富含T碱基的DNA1和DNA2探针分别修饰在金电极和纳米金颗粒(AuNPs)上, 再加入Hg²⁺, 通过形成T-Hg²⁺-T结构使AuNPs结合到金电极表面. 当加入GSH(或Cys)后, GSH(或Cys)可以竞争结合T-Hg²⁺-T结构中的Hg²⁺, 使AuNPs离开电极表面. 由于AuNPs上修饰的DNA探针能够静电吸附大量电活性物质六氨合钌(RuHex), 因此该过程可引起计时电量信号的显著变化, 据此实现了GSH(或Cys)的高灵敏检测. 该传感器的检出限达10 pmol/L, 比荧光法或比色法降低了2~3个数量级. 实验结果表明, 该传感器具有较好的选择性.     

基于金纳米颗粒信号放大效应电化学检测DNA聚合酶

基于金纳米颗粒(AuNPs)比表面积大、 尺寸小和能够承载大量DNA片段的特点, 建立了一种免标记、 简便、 快速检测DNA聚合酶Klenow fragment exo-(KF^-)的电化学方法. 首先将巯基化的DNA引物片段修饰在金电极上, 然后加入模板DNA链以及修饰有报告DNA链的金纳米颗粒(AuNPs-DNA), 模板DNA链能同时与DNA引物片段和修饰在AuNPs上的报告DNA链进行互补杂交形成"三明治"结构, 从而将AuNPs-DNA修饰在电极表面; 当加入电活性物质钌铵(RuHex)后, RuHex可通过静电吸附作用结合在DNA上. AuNPs上修饰的报告DNA链能够吸附大量RuHex, 导致电化学信号放大. 当加入脱氧核糖核苷三磷酸(dNTPs)以及KF^-聚合酶后, 引物片段发生延伸反应, 将与模板DNA链杂交的AuNPs-DNA竞争下来, 带走大量的RuHex, 使电信号降低, 从而实现对聚合酶的检测. 实验结果表明, 利用该方法可以检测到5 U/mL的KF^-.     

聚合物PVP保护的贵金属纳米结构材料电化学合成新方法

以不同聚合度的聚乙烯吡咯烷酮(PVP)作为金纳米团簇的稳定剂和形状控制剂,应用电化学还原方法制备尺寸可控的金纳米晶体.借助PVP聚合物的动态伸缩和卷曲特性将电化学还原得到的金纳米粒子前驱体组装成线状和环状的纳米粒子聚集体,再由不稳定前驱体粒子的定向聚集制备厚度为几十纳米的金纳米棱柱.并用分步电化学还原法合成核壳结构的金银纳米复合粒子.本文为制备不同形状和结构的贵金属纳米结构材料提供了一种可行的电化学合成新方法.     

利用DNA三维纳米结构对量子点功能化的有序调控

利用DNA纳米技术构建了内部具有空穴的DNA纳米立方体结构,将量子点封装在其内部,可达到在量子点的特定位点修饰数量可控的不同DNA序列的目的,进而精准控制量子点的结合位点数量和空间取向.为了验证构建的结构表面可以功能化不同的DNA序列,且可控地连接在不同位点,继续通过DNA之间的杂交对此结构进行了不同尺寸金纳米粒子的组装.通过透射电子显微镜观察发现,在此方法下由DNA三维纳米结构与量子点组建的复合结构不仅能控制连接的金纳米粒子数量,还能控制组装后的几何构型.本文方法适于构建多结合位点与功能化的量子点探针,在生物医学方面有巨大的应用潜力.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.