甲壳素和壳聚糖在离子液体中的溶解、材料化以及衍生化

甲壳素和壳聚糖是可再生的大分子生物质资源.由于分子内和分子间的强烈氢键作用,甲壳素和壳聚糖不能溶解在水或常规有机溶剂中,这极大地限制了其在诸多领域中的应用.离子液体作为一种新型绿色溶剂,对甲壳素和壳聚糖具有优良的溶解作用.本文综述了离子液体对甲壳素和壳聚糖的溶解性能和溶解机理,概述了均相溶液体系中纤维、膜、凝胶等材料的制备以及酰化、接枝共聚、交联、降解、希夫碱化等多种衍生化反应,总结了离子液体在甲壳素和壳聚糖化学研究中面临的挑战并对其进行了展望.     

Systematical law of β+-decay half-lives of nuclei far from β-stable line

Experimental data of nuclear β⁺-decay half-lives are systematically analyzed and investigated. We present an exponential law between the half-life of β⁺-decay with the same forbiddenness and the nucleon number (Z,N) of parent nucleus far from the β-stable line. A formula with four parameters is proposed to describe the β⁺-decay half-lives of nuclei far from stability. Experimental β⁺-decay half-lives of the first and second forbidden transitions are well reproduced by this simple formula. The physics of the exponential law is related to the statistical properties of β⁺-decay far from β-stable line.     

Effects of composition on microstructure and crystallization behavior for impact polypropylene copolymer investigated by restructuring the complex core-shell dispersed particles in ternary blends

A series of ternary blends of polypropylene/ethylene-propylene random copolymer/ethylene-propylene segmented copolymer(HPP/EPR/Eb P) whose microstructures are similar to those of impact polypropylene copolymer(IPC) were prepared in order to systematically investigate the effects of composition on microstructure and crystallization behavior of IPC. The observation of primary phase morphology reveals that the dispersed phase with core-shell structure could be rebuilt in certain composition and excessive EPR leads to a bicontinuous phase structure in ternary blends. After undergoing same quiescent crystallization including isothermal and non-isothermal crystallization, these blend samples exhibit special composition-dependent melting behavior, i.e., the melting point increases markedly with the increase of EPR content until it turns down at a critical content(about 30 wt%). The crystallization behavior is mainly ascribed to the different nucleation abilities. It is suggested that although the compatibility between EPR and HPP components becomes worse with the increase of EPR content due to the increased interfacial area and the decreased concentration of Eb P, higher EPR content in the blend facilitates to heterogeneous nucleation except for the appearance of obvious bicontinuous phase structure.     

氢化燃烧法合成La1.5Ni0.5Mg17的工艺优化

采用正交实验设计方法安排实验，运用L9(3^4)优化氢化燃烧法合成La1.5Ni0.5Mg17的工艺，考察了施压制饼时间、合成保温时间、合成起始氢气压力、保温温度4个因素对储氢材料的储放氢容量和速率的影响，通过直观分析和方差分析得出优化的工艺为：保温温度903K，制饼施压时间40min，合成起始氢气压力为1MPa，合成保温时间1800min。此条件下合成储氢材料La1.5M0.5Mg17在573K的储放氢容量分别为：5．40和5．15％H(质量分数)；储放氢速率分别为：0．734和0.681％H／min。用XRD分析了材料吸氢和脱氢后的物相结构发现：用Ni适量取代La2Mg17中的La没有导致结构变化，存在的LaNi5，LaH3和La改善了材料的吸放氢速率。     

Novel poly(methyl methacrylate)-based ionomers used as multifunctional aids to modify poly(vinyl chloride)

Poly(methyl methacrylate)(PMMA) based ionomers with different lanthanum(La(Ⅲ)) contents(PMMA-XLa) synthesized by free radical solution polymerization were applied to poly(vinyl chloride)(PVC) resins as a kind of multifunctional aids, and their performances were evaluated by measuring the static stability time, initial discoloration, transparency, fusion behavior and tensile strength of the modified PVC. The ionomers with proper lanthanum(La(Ⅲ)) contents show a better thermal stability efficiency in comparison with traditional stabilizer lanthanum stearate. Meantime, they can accelerate PVC plasticization more efficiently than PMMA. The rigid PVC products stabilized with the ionomers present good transparency and enhanced tensile strength.     

加工工艺对炭黑填充聚合物双基体复合材料导电性能的影响

制备了炭黑(CB)填充高密度聚乙烯(HDPE)/乙烯-醋酸乙烯酯共聚物(EVA)双基体复合材料,研究了加料顺序、混合时间对复合材料导电性能的影响.结果表明,CB主要分布在HDPE相中;采用CB首先填充EVA然后与HDPE混合,或采用EVA/HDPE共混物与CB混合的加工策略,均可获得导电性较优的导电复合材料.然而,混合过程显著影响CB填充双基体复合材料的导电性.采用EVA/HDPE共混物与CB混合法加工复合材料,导电性受相形态演化影响较小.     

HDPE/CB导电复合材料电-热平衡态电学行为

研究了ＨＤＰＥ／ＣＢ导电复合材料在不同环境温度下电－热平衡态的电学行为,发现其电流密度－电场强度－电导率（Ｊ－Ｅ－σ）关系曲线经临界点参量约化后可有效地重叠。根据自发热临界电流密度、电场强度以及电导率与材料线性电导率之间的标度关系,揭示了复合材料在不同温度下的导电机理的一致性及宏观电学行为与微观导电网络结构的相互关联性。     

单轴压力对高密度聚乙烯/碳黑导电复合材料电阻特性的影响

研究了高密度聚乙烯/炭黑导电复合材料在单轴压力作用下电阻的变化规律.结果表明,在低压力下,复合材料电阻随压力增加而降低;而在较高压力下则随压力增大而升高,分别呈现出所谓的“电阻负压力系数”和“电阻正压力系数”效应.电阻的压力依赖性以及由压缩引起的电阻不可回复性,被认为与外力作用下导电网络的重组与破坏有关.由此提出了导电复合材料单轴压力作用-电阻相互关系的唯象模型.     

CB填充聚合物导电复合体系熔体聚集态结构演化

本文试图在低频率（ω）及小应变条件下,追踪粒子填充导电复合材料微观结构的变化与发展,并通过修正的KerneNielson 方程对材料的聚集态结构进行研究.     

多壁碳纳米管/聚乙烯复合材料的制备及其导电行为

多壁碳纳米管/聚乙烯复合材料的制备及其导电行为;碳纳米管;高密度聚乙烯;渗流阈值;导电行为;V-PTC特性