N-Fluorinated phenyl-N＇-pyrimidyl urea derivatives： Synthesis,biological evaluation and 3D-QSAR study

With the increase of herbicide-resistant weeds, novel, more selective and even more potent herbicides to control weeds are needed. In this paper, a series of N-fluorinated phenyl-N＇-pyrimidyl urea derivatives were synthesized and screened for their herbicidal activities against Amaranthus retroflexus （AR） and Setaria viridis （ SV）. Compound 2S （N-（3-trifluoromethylphenyl）-N＇-（2-amino-4-chloro-6-methylpyr- imidyl） urea） exhibited marked herbicidal activity against SV（IC50 =11.67 mg/L） and is more potent than bensulfuron （IC50= 27.45 mg/L）, a commercially available herbicide. A statistically significant CoMFA model with high prediction abilities （q2 = 0.869, r2 = 0.989） was obtained.     

科学家模仿天然珍珠质结构制造新型陶瓷材料

<正>《自然-材料学》报道一种制造简便、强度硬度高的陶瓷材料,这种陶瓷材料可模拟天然珍珠质(包在珍珠外层的一种坚硬物质)的实体结构。这种陶瓷材料在600℃高温时仍可保持其性质,可应用于能源相关和运输安全相关的结构材料。陶瓷属于易碎物质。为了增强韧性,可在其成分中添加变形后不会发生断裂的聚合物和金属。但     

基于萘普生-芳基金属配合物的抗癌及抗炎性能

以萘普生(NPX)为前体, 分别与芳基钌(Ru)、 锇(Os)及铱(Ir)二聚体反应制备了3个单核配合物[Ru(η ⁶-p-cymene)(NPX-bpy)Cl]Cl(1), [Os(η ⁶-p-cymene)(NPX-bpy)Cl]Cl(2)和[Ir(η ⁵-Cp ^*)·(NPX-bpy)Cl]Cl(3). 利用元素分析、 电喷雾质谱和核磁共振波谱对3个配合物的组成和结构进行了表征, 并研究了其细胞毒性. 结果表明, 3个配合物对几种肿瘤细胞株均无毒性(IC₅₀>100 μmol/L), 仅配合物1对NB-4细胞有中等程度的毒性(IC₅₀=45.2 μmol/L), 且毒性大于配合物2和3, 这可能与配合物1在细胞核内具有更高的富集量有关. 此外, 3个配合物均可有效抑制COX-2的表达, 保留了萘普生的抗炎性质, 实现了金属配合物抗癌及抗炎的多功能化应用.     

具有抗生物污染活性的分子筛膜用于高效油水分离

The development of the global economy has been accompanied by frequent oil spills caused by accidental leaks and industrial manufacturing, which have seriously threatened the aquatic environment and human health. Traditional methods for the treatment of oily wastewater include centrifugation, skimming, flotation, oil-absorbing technology, etc., which are limited by low separation efficiency as well as secondary pollution during the post-processing of oil absorption materials. Recently, separation technologies utilizing the special wettabilities of filtration membranes have been developed to enrich and recycle oils from wastewater. Among these, the fabrication of superhydrophilic/underwater superhydrophobic membranes have attracted intensive research interest, which can selectively allow the passage of water through the membrane while blocking the oils. However, microorganisms are more likely to breed on these hydrophilic surfaces, eventually leading to the blockage of the membranes. In this study, ZSM-5 zeolite crystals (MFI topological structure) were coated onto the stainless-steel meshes by means of seeding and secondary hydrothermal growth. Then, 70% of the total Na⁺ ions in the zeolite channels were substituted by Ag⁺ ions via an ion exchange process. The resultant membranes (Ag@ZCMFs) were superamphiphilic in air, with both water contact angle and oil contact angle of approximately 0°. However, they became superoleophobic when immersed in water, and the underwater oil contact angle reached 151.27° ± 4.34°. In terms of special wettability, Ag@ZCMF achieved efficient separation for various oil-water mixtures with separation efficiencies above 99%. The water flux and intrusion pressure of Ag@ZCMF depended on the diameter of pinholes in the membrane, which could be modulated by altering the time of secondary hydrothermal growth. For instance, the average diameter of pinholes in Ag@ZCMF with optimum secondary growth time of 14 h (Ag@ZCMF-14) reached approximately 21 μm, giving rise to the water flux and intrusion pressure of 54720 L·m^-2·h^-1 and 4357 Pa, respectively. The anti-corrosion test and rubbing test confirmed the high chemical and mechanical stability of Ag@ZCMF-14, respectively. The separation efficiency of Ag@ZCMF-14 remained stable during ten purification-regeneration cycles, and no obvious attenuation was observed, proving the high separation stability of Ag@ZCMF-14. Furthermore, the loaded Ag⁺ ions afforded the membrane excellent anti-biofouling activity, which could effectively inhibit the growth of both alga and bacteria in the operating environment, thus preventing membrane blockage during the oil-water separation process. In particular, the bacteriostatic rate of Ag@ZCMF-14 to Escherichia coli reached to 99.6%. These results demonstrate that Ag@ZCMFs with anti-biofouling activity has promising potential future applications in the removal of oil slicks from oily wastewater.     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

富马酸丙酚替诺福韦合成工艺改进

对富马酸丙酚替诺福韦的合成工艺进行了改进,以干燥的替诺福韦为起始原料,与亚磷酸三苯酯反应得到(R)-9-(2-(苯基磷酰基甲氧基)丙基)腺嘌呤（3）; 3被氯化亚砜氯代得(R)-9-(2-(((苯基)(氯代)(磷酰基)甲氧基)丙基)腺嘌呤（4）; 4与L-丙氨酸异丙酯盐酸盐缩合得9-((R)-2-(((S)-((1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（5）; 5经析晶纯化得9-((R)-2-(((S)-（((S)-1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（丙酚替诺福韦,6）; 6与富马酸成盐得富马酸丙酚替诺福韦,其结构经¹H NMR, ¹³C NMR, MS(ESI),元素分析和XRD确证。按改进工艺进行公斤级规模放大,产品总收率达到32.2%,化学纯度99.92%,非对映异构体纯度99.99%。     

火灾与撞击联合作用下钢管混凝土柱力学性能研究

为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。     

多分辨力分析在自动聚焦算法抗噪声性能中的应用

自动聚焦是数码设备、计算机视觉中的一项关键技术。自动聚焦过程中,聚焦的准确性和抗噪声性能至关重要。以高频分量作为度量的聚集评价函数具有灵敏性高、聚焦准确的优点,适用于实时系统,但是对噪声十分敏感,受噪声污染时可能导致聚焦失败。因此,提出了一种具有噪声稳健性的高频分量自动聚焦评价函数。该函数通过小波多分辨力分析提取高频分量,利用了信号的每个子带的小波系数存在一定相关性,而噪声不存在这样的相关性的特点,设定高频子带阈值,认为低于阈值的系数是噪声的贡献,大致分离图像信号与噪声信号,从而将其滤除。经过大量的实验,证明提出的方法具有单峰性好、灵敏度高等优点,特别是在抗噪声性能方面有很大提高。     

光学移相干涉仪抗振系统的鲁棒控制系统仿真分析

将被动抗振和主动抗振相结合的混合控制技术应用于解决光学移相干涉仪抗振系统的不确定性问题,其中主动抗振采用鲁棒控制策略.该方法克服了由模型和干扰所引起的不确定性,使得控制系统能够有效地抑制抗振模型的不确定性和外部振动的干扰.仿真结果表明,该方法使光学移相干涉仪在振动的干扰下具有较好的鲁棒稳定性和控制准确度.     

套管外压挤毁强度分析与计算

在对大量的套管全尺寸挤毁试验结果分析的基础上，提出套管外压失稳机理：实际工程中的套管截面不是理想圆，在外压作用下的非圆套管圆周方向上环向应力分布不均匀，有附加弯矩效应；随外压增加，在最大压缩环向应力处达到屈服；当屈服逸到一定程度时，材料由于强度承载力不足而失效，导致套管发生失稳挤毁。基于上述套管强度挤毁准则，分析了理想弹塑性套管在轴向载荷作用下的抗挤强度计算方法，得到较保守的套管挤毁压力计算公式。与试验结果对比表明：导出的计算公式偏差较小，计算精度满足工程要求，失稳强度准则是适用的。