压荷载下类岩石材料中的锯齿形裂纹分析

针对类岩石材料的复杂性和非均质性，特别是材料中一些强度相对较弱的晶界的存在等，对形状较为复杂的两种锯齿形裂纹：内张型滑动裂纹和单翼滑动裂纹的应力强度因子进行了分析．结合经典的滑动裂纹模型，讨论了裂纹起裂角、侧压以及翼裂长度等对应力强度因子的影响．分析的结果为进一步研究类岩石材料的断裂损伤机理提供了理论基础．     

化学镀耐磨自润滑Ni-P复合镀层的摩擦磨损性能

利用化学复合镀技术制备了Ni-P-碳纳米管(Ni-P-CNTs)和Ni-P-无机类富勒烯WS2[Ni-P-(IF-WS2)]复合镀层,考察了复合镀层的减摩抗磨性能.结果表明,Ni-P-CNTs和Ni-P-(IF-WS2)复合镀层的减摩抗磨性能优于化学镀Ni-P和Ni-P-石墨镀层,其原因在于Ni-P-CNTs化学复合镀层中的碳纳米管具有优异力学性能和同轴石墨纳米管结构,而Ni-P-(IF-WS2)化学复合镀层中的IF-WS2具有封闭层状类富勒烯球形结构,二者均具有优异的自润滑性能.     

无机类富勒烯过渡金属硫化物纳米材料的合成及其摩擦学应用研究进展

评述了无机类富勒烯（IF）与过渡金属硫化物（WS2和MoS2等）纳米材料的合成技术及其摩擦学应用研究的最新进展，外型为球形或近似于球形并具有嵌套中空结构的IF－WS2和IF－MoS2纳米果粒具有潜在的摩擦学应用前景；对含有IF－WS2纳米颗粒的复合材料和Ni-P复合镀层的研究表明，其比含有石墨和层状2H－WS2粉末的固体润滑剂具有更优异的摩擦学性能。     

Tensegrity applied to modelling the motion of viruses

A considerable number of viruses’structures have been discovered and more are expected to be identified.Different viruses’symmetries can be observed at the nanoscale level.The mechanical models of some viruses realised by scientists are described in this paper,none of which has taken into consideration the internal deformation of subsystems. The authors’models for some viruses’elements are introduced,with rigid and flexible links,which reproduce the movements of viruses including internal deformations of the subunits.     

Prediction of Quasi-Brittle Fracture of Concrete and Rock Structures Using Laboratory-Sized Specimens

A simple method is developed for predicting the fracture behaviour of struetures made of quasi-brittle materials sueh as eonerete and roek using the data from laboratory-sized speeimens. The method is based on the reeently-developed boundary effeet concept and associated asymptotic model. It is demonstrated that the ＂apparent＂ size dependence of fraeture behaviour of concrete and rock is in fact due to the influence of specimen boundaries. Various size effect phenomena that are often observed in fracture meehanies tests of eoncrete and roek are related to each other, and the asymptotie boundary effect model can explain all the observed ＂size＂ effeet phenomena. Four types of experimental results available in the literature （ineluding the data measured on （1） the speeimens of identical size with different crack-to-size （α） ratios, （2） specimens of different sizes with different a-ratios, （3） different types of specimens and （4） geometrieally similar speeimens） are used to verify the asymptotic boundary effect model, and it is found that the predictions of the model agree very well with the experimental results. Furthermore, the important fracture properties, fracture toughness KIC and strength f, of quasi-brittle materials sueh as eonerete and roek can also be calculated using the formulae provided in the model.     

层合球面各向同性热释电空心球的瞬态响应

运用叠加原理，将层合球面各向同性热释电空心球的球对称动力学问题的解分成准静态和动 态两部分，准静态部分首先运用状态空间法给出了显式表达式，然后运用分离变量法、初参 数法和特征函数展开技术，给出了动态部分的表示式，再结合内外表面上的电学边界条件和 界面上的电学连续条件，导出一个关于时间函数的第二类Volterra积分方程，运用插值法 可成功地给出此积分方程的高精度数值解，最终可求得原问题的位移、应力、电位移以及电 势的响应. 此方法适用任意层数且各层是任意厚度的层合热释电空心球作用随时间以任意形 式变化的球对称温度场. 文中还给出了数值结果.     

直流射频等离子体增强化学气相沉积类金刚石碳薄膜的结构及摩擦学性能研究

利用直流射频等离子增强化学气相沉积技术在单晶硅表面制备了类金刚石碳薄膜．采用Raman光谱、红外光谱、x射线光电子能谱和原子力显微镜等研究了薄膜的微观结构和表面形貌,在UMT-2MT型摩擦磨损试验机上考察了薄膜在不同载荷与滑动速度下的摩擦学性能。结果表明：所制备的类金刚石碳薄膜具有典型的类金刚石结构特征,薄膜均匀、致密,表面粗糙度小,硬度较高;薄膜与Si3N4陶瓷球对摩时显示出良好的抗磨减摩性能;随着试验载荷与滑动速度的提高,薄膜的摩擦系数降低,耐磨寿命降低;薄膜的减摩抗磨性能同其在Si3N4陶瓷球偶件磨损表面形成的转移膜相关。     

结构中弹性波传播的可视化方法

由于结构中弹性波传播的复杂性，其场量(位移、应变、速度)表达式往往为繁杂、冗长的数学表达式，表达式本身不能直观、形象地表征结构中弹性波的传播特征．本文以杆中纵波传播为例，基于Matlab开发了弹性波传播特征的可视化程序，将杆中纵波传播特性以一种动态、直观、形象的形式展现出来．     

EFFECTIVE ELASTIC MODULUS OF BONE-LIKE HIERARCHICAL MATERIALS

A shear-lag model is used to study the mechanical properties of bone-like hierarchical materials.The relationship between the overall effective modulus and the number of hierarchy level is obtained.The result is compared with that based on the tension-shear chain model and finite element simulation,respectively.It is shown that all three models can be used to describe the mechanical behavior of the hierarchical material when the number of hierarchy levels is small.By increasing the number of hierarchy level,the shear-lag result is consistent with the finite element result.However the tension-shear chain model leads to an opposite trend.The transition point position depends on the fraction of hard phase,aspect ratio and modulus ratio of hard phase to soft phase.Further discussion is performed on the flaw tolerance size and strength of hierarchical materials based on the shear-lag analysis.     

基于支持向量回归机的陀螺漂移预测模型

为了预测某导弹陀螺漂移趋势,以该陀螺漂移角速度时间序列为对象,建立了基于支持向量回归机的预测模型。针对该预测模型的特点,提出了支持向量预选取的模型优化方法。基于ε不敏感损失函数的支持向量回归机具有稀疏性,其结构由支持向量决定。因此从训练样本集中预选出有可能成为支持向量的样本,精简样本规模是提高该类支持向量回归机训练和预测效率的有效方法。针对该类支持向量回归机从分类和回归两个角度分析了支持向量的几何特征,提出了核函数空间免疫聚类的支持向量预选取方法并用于某导弹陀螺漂移预测模型的数据预处理。仿真结果表明优化后的预测模型运算量小、建模速度快,精度高。