铂（Ⅳ）—钼酸盐—丁基罗丹明B缔合显色反应的研究

本文研究在聚乙烯醇(PVA)存在下,铂与钼酸铵和丁基罗丹明B(BRB)形成离子缔合物,该缔合物的最大吸收位于570nm,摩尔吸光系数ε值为9.26×10~5L·mol~(-1)·cm~(-1),服从比耳定律范围0～3.0μg Pt/25ml,缔合物至少稳定3周。测定铂的条件为C_(HClO_4)=1.4mol/L,C_(MoO_4~(2-)=1.1×10~(-3)mol/L,C_(BRB)=3.8×10~(-5)mol/L,0.08％PVA。考察了40多种共存离子的影响,除形成杂多酸的元素外,大多数不干扰。本法已用于催化剂和某些铂矿中铂的测定,结果较满意。     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.     

A water soluble nanostructured platinum (0) metal catalyst from platinum carbonyl molecular clusters: Synthesis, characterization and application in the selective hydrogenations of olefins, ketones and aldehydes

High nuclearity platinum carbonyl cluster anions (Chini's clusters) have been used as precursors to prepare a platinum nanocatalyst. The ionic polyelectrolyte poly(diallyldimethylammonium chloride) has been used as the support material for anchoring [Pt₃₀(CO)₆₀]²⁻ via ion-pairing and subsequent stabilization of the nanoparticles. The polymer-supported material has been studied by spectroscopy (NIR, ¹³C NMR, and IR) and TEM before and after its use as a water soluble hydrogenation catalyst. The nanocatalyst is found to be effective for the chemoselective hydrogenation of olefinic, aldehydic and ketonic double bonds. For most of the substrates isolation of the product and reuse of the catalyst are extremely easy due to the automatic phase separation of the products from the catalyst. The spectral features of the fresh catalyst show retention of the carbonyl ligands and molecular identity of the parent cluster, but after use the carbonyl ligands appear to be lost. TEM of the supported material before and after use as a catalyst shows the presence of platinum nanoparticles with majority (≥70%) of the particles in the range of 2–6 nm. Smaller particles are dominant in the used catalyst and this observation is rationalized on the basis of the known reactivity of Chini's clusters with dihydrogen.     

Synthesis and characterization of organometallic conjugated polymers containing tricarbonyl(arene)chromium unit and platinum

Novel organometallic conjugated polymer containing (η⁶-arene)Cr(CO)₃ and platinum in the main chain was synthesized by dehydrohalogenation coupling reaction of (η⁶-1,4-diethynylbenzene)tricarbonylchromium with trans-(PBu₃)₂PtCl₂. The polymer was soluble in common organic solvents and has the number-average molecular weight of 31,000 by GPC analysis. The polymer exhibited an absorption peak derived from π-π^∗ interaction at 358 nm in the UV-Vis spectrum, which showed a red shift of approximately 90 nm compared to that of the model compound. The photochemical ligand exchange reaction of the polymer was also investigated.     

Reactivity of silyl-substituted heterobimetallic iron-platinum hydride complexes towards unsaturated molecules: Part II. Insertion of trifluoropropyne and hexafluorobutyne into the platinum-hydride bond

Insertion of hexafluorobutyne into the Pt-H bond of the heterobimetallic complexes [(OC)₃Fe{Si(OMe)₃}(μ-Ph₂PXPPh₂)Pt(H)(PPh₃)] (1a X = CH₂; 1b X = NH) yields the σ-alkenyl complexes [(OC)₃Fe{μ-Si(OMe)₂(OMe)}(μ-Ph₂PXPPh₂)Pt{C(CF₃)C(H)CF₃}] (3a X = CH₂; 3b X = NH). This insertion reaction is accompanied by dissociation of the platinum bound PPh₃ ligand and saturation of the vacant coordination site by a dative μ−η²-Si-O → Pt interaction. Addition of the Pt-H bond of 1a across the triple bond of 3,3,3-trifluoropropyne affords in a regiospecific manner [(OC)₃Fe{μ-Si(OMe)₂(OMe)}(μ-dppm)Pt{C(CF₃)CH₂}] (2) having the trifluoromethyl substituent on the α-carbon. Addition of RNC to 3 affords the isocyanide adducts [(OC)₃Fe{Si(OMe)₃}(μ-Ph₂PXPPh₂)Pt(CNR){C(CF₃)C(H)CF₃}] (4a R = t-Bu, X = CH₂; 4b R = 2,6-xylyl, X = CH₂; 4c R = 2,6-xylyl, X = NH). In dichloromethane solution 3a is gradually transformed into the C₄F₆-bridged compound [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt(CO)] 5. The Pt-bound carbonyl ligand of 5 is displaced by xylylisocyanide or trimethylphosphite affording the derivatives [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt(CNxylyl)] 6 and [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt{P(OMe)₃}] 7. The molecular structures of 4a, 5 and 6 have been determined by X-ray diffraction studies.     

Nickel foam-based composite electrodes for electrooxidation of methanol

Nickel foam and five nickel foam-based composite electrodes were prepared for being used as anode materials for the electrooxidation of methanol in KOH solution containing 0.1 and 1.0 M of methanol. The layered electrodes composed of nickel foam, platinum nanoparticles, polyaniline (PANI) and/or porous carbon (C) prepared in various assemblies. As shown by SEM analysis, depending on the preparation conditions, the electrodes of different morphologies were obtained. Using the cyclic voltammetry method, the oxidation of methanol on nickel foam electrode was observed in the potential range 0.4 V ↔ 0.7 V, where the Ni(OH)₂/NiOOH transformation occurred. The presence of Pt particles in electrode gave rise to the increase in electrocatalytic activity in this potential range. For electrodes containing dispersed platinum catalyst (Ni/Pt, Ni/PANI/Pt and Ni/C/Pt), the oxidation of methanol was noted also in the potential range −0.5 V ↔ 0.1 V. The electrocatalytic activities of the examined electrodes toward methanol oxidation at low potentials were in order Ni/Pt > Ni/C/Pt > Ni/PANI/Pt, whereas at high potentials in order Ni/PANI/Pt > Ni/Pt> Ni/C/Pt > Ni. Among the examined electrodes, the most resistant to cyclic poisoning appeared to be the Ni/C/Pt electrode. Presented at the 4Th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Pt-CNTs 修饰玻碳电极(Pt-CNTs/GC)电氧化活性的研究

采用透射电镜(TEM)和选区电子衍射(SAED)技术, 分别表征了Pt-CNTs/GC电极的表面形貌和所负载铂纳米原子簇的结构. 以CO和CH3OH为探针分子, 用循环伏安和计时电流等常规电化学方法检测了CO和CH3OH在Pt-CNTs/GC电极上的氧化行为. 研究结果表明, CO在Pt-CNTs/GC电极上有3个氧化电流峰(Ⅰ, Ⅱ, Ⅲ), 其中峰Ⅰ为CO桥式吸附的氧化峰, 而峰Ⅱ和Ⅲ则分别为CO线形吸附在碳纳米管负载的不同粒径的Pt纳米原子簇以及Pt原子薄膜上所分裂的氧化峰; CH3OH在Pt-CNTs/GC电极上也能自发解离吸附强吸附中间体CO; Pt-CNTs/GC电极对CH3OH的氧化峰电流不总是随CNTs上载铂量的增加而增大, 表明在制备直接甲醇燃料电池阳极时, 应选择合适的载铂量.     

Selective hydrosilylation of styrene using an in situ formed platinum(1,3-dimesityl-dihydroimidazol-2-ylidene) catalyst

A highly active and selective in situ formed platinum(N-heterocyclic carbene) catalyst for the hydrosilylation of styrene with triethylsilane is described, which unlike all other known hydrosilylation catalysts, selectively yields hydrosilylation products, but (almost) no dehydrogenative silylation products.     

Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Glutathione modified CdTe quantum dots as a label for studying DNA interactions with platinum based cytostatics

Cisplatin, carboplatin, and oxaliplatin represent three generations of platinum based drugs applied successfully for cancer treatment. As a consequence of the employment of platinum based cytostatics in the cancer treatment, it became necessary to study the mechanism of their action. Current accepted opinion is the formation of Pt‐DNA adducts, but the mechanism of their formation is still unclear. Nanomaterials, as a progressively developing branch, can offer a tool for studying the interactions of these drugs with DNA. In this study, fluorescent CdTe quantum dots (QDs, λ_em = 525 nm) were employed to investigate the interactions of platinum cytostatics (cisplatin, carboplatin, and oxaliplatin) with DNA fragment (500 bp, c = 25 μg/mL). Primarily, the fluorescent behavior of QDs in the presence of platinum cytostatics was monitored and major differences in the interaction of QDs with tested drugs were observed. It was found that the presence of carboplatin (c = 0.25 mg/mL) had no significant influence on QDs fluorescence; however cisplatin and oxaliplatin quenched the fluorescence significantly (average decrease of 20%) at the same concentration. Subsequently, the amount of platinum incorporated in DNA was determined by QDs fluorescence quenching. Best results were reached using oxaliplatin (9.4% quenching). Linear trend (R² = 0.9811) was observed for DNA platinated by three different concentrations of oxaliplatin (0.250, 0.125, and 0.063 mg/mL). Correlation with differential pulse voltammetric measurements provided linear trend (R² = 0.9511). As a conclusion, especially in the case of oxaliplatin‐DNA adducts, the quenching was the most significant compared to cisplatin and nonquenching carboplatin.