金在微电极上的电沉积研究

本工作利用微循环伏安法和阶跃电位法研究在ＡｕＣｌ３的酸性溶液中金在玻碳和铂微电极上的电沉积行为。结果表明，金在微电极上成核所需的过电位较高，但成核几率也高，在所研究的微电极尺寸范围内，金可形成大量的临界单核，且核的生长速率很快。铂微电极上金电沉积的Ｉ－ｔ曲线符合连续成核的模式。     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Ein neues Erdalkalimetall-Oxoplatinat-Cuprat Ca3,5Cu0,5PtO6

A new Alkaline-Earth Platinum Copper Oxide: Ca_3.5Cu_0.5PtO₆ Ca_3.5Cu_0.5PtO₆ was prepared and investigated by single crystal X-ray work. (Space group C? C12/m1; a = 9.0743; b = 9.2527; c = 6.4840 Å; β = 91.448°; Z = 4). The crystal structure of the previously unknown compound is closely related to the structure of Sr₃PtCuO₆ and Sr₃IrCuO₆ as well as the rhombohedral phases M₄PtO₆ (M = Ba, Sr, Ca). Typical features of the crystal chemistry are isolated chains of PtO₆ octahedra, alternately allyed by square CuO₄ polygones and trigonal prisms of O^2? around Ca²⁺.     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

Preconcentration and Separation Procedures for the Spectrochemical Determination of Platinum and Palladium

Low concentrations of Pt and Pd in industrial (µgg^–1 level) and environmental samples (ngg^–1 level) together with the complexity of the matrix causing many interferences during the determination of noble metals often require elaboration and application of pre-concentration/matrix separation procedures before detection of the analyte. Different pre-concentration/matrix separation procedures applied prior to the determination of Pt and Pd by atomic spectrometric techniques are reviewed and critically compared taking into account potential interferences. The methods studied are divided into 5 groups including precipitation and coprecipitation, liquid–liquid extraction, solid phase extraction, electrochemical pre-concentration and biosorption. The main analytical problems occuring during sample preparation and storage are discussed.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

The preparation of a new polysiloxane copolymer with glucosylthioureylene groups on the side chains

A new polysiloxane with pendent sugar units was prepared by a two-step method: the preparation of the polysiloxane with amino groups on the side chain and then the copolysiloxane reacted with glucosyl isothiocyanate. All polymers were characterized by FT-IR 1H-NMR, 1H-1H-COSY, 13C-NMR, and DEPT respectively. In the same time, Platinum oxide was found to be a versatile and powerful hydrosilation catalyst in the hydrosilylation reaction of aminotrimethylenepolysiloxanes with heptamethylcyclotetrasiloxane (D₄^H).     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Synthese und Struktur der Platin(O)-Verbindungen [(dipb)Pt]2(COD) und (dipb)3Pt2 sowie des clusters Hg6[Pt(dipb)]4 (dipb = (i-Pr)2P(CH2)4P(i-Pr)2)

Synthesis and Structure of the Platinum(0) Compounds [(dipb)Pt]₂(COD) and (dipb)₃Pt₂ and of the Cluster Hg₆[Pt(dipb)]₄ (dipb = (i-Pr)₂P(CH₂)₄P(i-Pr)₂) The reduction of (dipb)PtCl₂ with Na/Hg yields (dipb)Pt as an intermediate which reacts with the amalgam to form the cluster Hg₆[Pt(dipb)]₄ ( 3 ) or decomposes to (dipb)₃Pt₂ ( 2 ) and Pt. In the presence of COD [(dipb)Pt]₂(COD) ( 1 ) is obtained. 1 crystallizes monoclinicly in the space group P2₁/c with a = 1596.1(4), b = 996.5(2), c = 1550.4(3) pm, β = 113.65(2)°, Z = 2. In the dinuclear complex two (dipb)Pt units are bridged by a 1,2-η²-5,6-η² bonded COD ligand. Whereby the C = C double bonds are lengthened to 145 pm. 2 forms triclinic crystals with the space group P1 and a = 1002.0(2), b = 1635.9(3), c = 868.2(2) pm, α = 94.70(2)°, β = 94.45(2)°, σ = 87.95(1)°, Z = 1. In 2 two (dipb)Pt moieties are connected by a μ-dipb ligand in a centrosymmetrical arrangement. 3 is monoclinic with the space group C2/c and a = 1273.8(3), b = 4869.2(6), c = 1660.2(3) pm, β = 95.16(2)°, Z = 4. The clusters Hg₆[Pt(dipb)]₄ have the symmetry C₂. Central unit is a Hg₆ octahedron of which four faces are occupied by Pt(dipb) groups. The bonding in the cluster is discussed on the basis of eight Pt? Hg two center bonds of 267.6 pm and two Pt? Hg? Pt three center bonds with Pt? Hg = 288.0 pm.     

Syntheses, spectroscopic characteristics and thermolytic rearrangements of bis-[(trimethylgermyl)methyl]platinum(II) and bis-[(trimethylstannyl)methyl]platinum(II) complexes

The preparations and spectroscopic characteristics are reported of a series of (trimethylgermyl)methyl- and (trimethylstannyl)methylplatinum(II) complexes with diene and P-donor ancillary ligands, cis-Pt(CH₂GeMe₃)₂L₂ (L = PPh₃ or PPh₂Me; L₂ = dppe or cod) and cis-Pt(CH₂SnMe₃)₂L₂ (L = PPh₃; L₂ =cod). Thermolysis of toluene solutions of cis-Pt(CH₂GeMe₃)₂(PPh₃)₂ leads to cis-Pt(Me)(CH₂GeMe₂CH₂GeMe₃)(PPh₃)₂ via β-alkyl migration, after (non-rate-limiting) phosphine dissociation. Estimated activation parameters (ΔH_{298 K}^‡ = 126 ± 3 kJ mol⁻¹, ΔS^‡ = + 17 ± 7 J mol⁻¹ K⁻¹ and hence Δ_{298 K}^‡ = 121 ± 5 kJ mol⁻¹) suggest that this system is more migration labile than its silicon analogue, primarily as a result of a lower activation enthalpy. While cis-Pt(CH₂GeMe₃)₂(PPh₂Me)₂ reacts similarly but less readily, Pt(CH₂GeMe₃)₂(dppe)₂ is inert at operable temperatures. Thermolysis of Pt(CH₂GeMe₃)₂(cod) generates 1,1,3,3,-tetramethyldi-1,3-germacyclobutane as the major organogermanium product, while from cis-Pt(CH₂SnMe₃)₂(PPh₃)₂, 1,1,3,3-tetramethyldi-1,3-stannacyclobutane predominates. Mechanistic implications are discussed.