茴拉西坦/介孔二氧化硅的制备及释药性能

为了提高难溶性药物的溶出速率,采用水热合成法制备了MCM-41和SBA-15两种介孔二氧化硅载体材料,利用浸渍法将模型药茴拉西坦负载于两种载体上.利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、小角X射线衍射(XRD)、N2吸附-脱附、红外光谱(IR)、差热-热重(DTA-TG)对载药前后载体材料的表面形貌、粒径、孔径、孔容、比表面积、晶胞参数、骨架结构等进行测试,结果表明MCM-41和SBA-15具有相同的二维六方孔道结构,孔径及孔容分别为3.49 nm和6.67 nm,载药后的载药量分别为17;和22;,药物以非晶态装载于介孔孔道中没有影响介孔二氧化硅的骨架结构,但使介孔孔容及比表面积都有所降低.通过在不同pH溶出介质中负载于载体上的茴拉西坦与原料药晶体的溶出比较发现,两种载体均能够显著提高茴拉西坦的溶出速率.结合材料表征、载药量及溶出度综合比较,SBA-15载体的载药及释药性能均优于MCM-41载体.     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

介孔SiO_2-TiO_2无机毛细管开管柱的制备及氨基酸混合物的分离

采用溶胶-凝胶法制备了SiO2/TiO2混溶胶。把溶胶抽入柱中,通过溶剂热反应和高温焙烧制得无机杂化毛细管电色谱开管柱。采用扫描电子显微镜(SEM)、能谱(EDS)、N2吸附-脱附(BET)对开管柱的结构形貌、成分和孔径分布进行了表征。以三种混合氨基酸作为分析物,获得了较好分离。     

Preparation of SiO2-TiO2 mesoporous inorganic hybrid capillary open tubular column and the separation for amino acid mixtures

采用溶胶-凝胶法制备了SiO2/TiO2混溶胶.把溶胶抽入柱中,通过溶剂热反应和高温焙烧制得无机杂化毛细管电色谱开管柱.采用扫描电子显微镜(SEM)、能谱(EDS)、N2吸附-脱附(BET)对开管柱的结构形貌、成分和孔径分布进行了表征.以三种混合氨基酸作为分析物,获得了较好分离.     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

富羧酸基团的共轭微孔聚合物:结构单元对孔隙和气体吸附性能的影响

Polar groups in the skeletons of conjugated microporous polymers (CMPs) play an important role in determining their porosity and gas sorption performance. Understanding the effect of the polar group on the properties of CMPs is essential for further advances in this field. To address this fundamental issue, we used benzene, the simplest aromatic system, as a monomer for the construction of two novel CMPs with multi-carboxylic acid groups in their skeletons (CMP-COOH@1 and CMP-COOH@2). We then explored the profound effect the amount of free carboxylic acid in each polymer had on their porosity, isosteric heat, gas adsorption, and gas selectivity. CMP-COOH@1 and CMP-COOH@2 showed Brunauer-Emmett-Teller (BET) surface areas of 835 and 765 m²·g^-1, respectively, displaying high potential for carbon dioxide storage applications. CMP-COOH@1 and CMP-COOH@2 exhibited CO₂ capture capabilities of 2.17 and 2.63 mmol·g^-1 (at 273 K and 1.05 × 10⁵ Pa), respectively, which were higher than those of their counterpart polymers, CMP-1 and CMP-2, which showed CO₂ capture capabilities of 1.66 and 2.28 mmol·g^-1, respectively. Our results revealed that increasing the number of carboxylic acid groups in polymers could improve their adsorption capacity and selectivity.     

气体轴承换热器技术研究

描述了一种新型换热器——气体轴承换热器,其静盘上设计有三个气体轴承孔,热负载加在静盘上,静盘上的热量传导到动盘的散热翅片上,在电机的驱动下,散热翅片高速转动产生的离心力作用形成气流,将热量直接带走。与风扇+翅片结构的传统换热器相比,气体轴承换热器的研究对减小换热器的换热面积、占用体积有重要意义。     

中国珠算申遗成功感怀(四首)

正~~