Design and simulation of the wire scanner for the injector linac of BEPCⅡ

BEPCⅡ, the upgrade project of Beijing Electron Positron Collider (BEPC), is an accelerator with large beam current and high luminosity, so an efficient and stable injector is required. Several beam diagnostic and monitoring instruments are used. A new diagnostic instrument — wire scanner, has been designed and will be used to measure the profile of the linac beam of BEPCⅡ. This paper describes the prototype of this system and the cause of heat generating of the wire. Some simulation results of the heat and force by using finite element method software—ANSYS^®,2) are presented and discussed.     

Nitrogen Dioxide Sensing Properties and Mechanism of Copper Phthalocyanine Film

Copper phthalocyanine film, a p-type organic semiconductor, is synthesized by vacuum sublimation and its surface morphology is characterized by SEM. A silicon-based copper phthalocyanine film gas sensor for NO2 detection is fabricated by MEMS technology. The results show that the resistance and sensitivity of copper phthalocyanine film decrease obviously as the NO2 concentration increases from Oppm to lOOppm. However, the sensitivity nearly keeps a constant of O. 158 between 30 ppm and 70 ppm. The best working temperature of the gas sensor is 90℃ for NO2 gas concentrations of lOppm, 20ppm and 30ppm, which is much lower than that of general metal oxide gas sensor.     

苯甲酰咪唑过氧化反应

以苯甲酰咪唑和叔丁基过氧化氢为反应物,1,8-二氮杂二环十一碳-7-烯(DBU)为催化剂,乙睛(CH₃CN)作为反应溶剂,合成了过氧化叔丁酯类化合物。 分别考察了不同催化剂及其用量、原料配比、溶剂、温度和时间对反应的影响,在最优条件下,共得到25个目标产物,收率范围为45%~99%。 目标化合物经核磁共振氢谱、核磁共振碳谱以及质谱进行了结构表征。 该方法具有操作简单、反应条件简单温和、产物收率高及底物适用性好等优点,为过氧化叔丁酯类化合物的合成提供了新的思路。     

一种新型Ag3PO4/Ag/Ag2Mo2O7纳米线光催化剂：三元纳米复合物的光催化活性

Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite photocatalyst was successfully prepared via an in situ precipitation method. The as-prepared Ag₃PO₄/Ag/Ag₂Mo₂O₇ nanocomposite included Ag₃PO₄ nanoparticles (NPs) as well as Ag NPs assembling on the surface of Ag₂Mo₂O₇ nanowires. Under visible light irradiation (λ>420 nm), the Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite degraded rhodamine B (Rh B) efficiently and showed much higher photocatalytic efficiency than pure Ag₃PO₄, Ag₂Mo₂O₇, or Ag₃PO₄/Ag₂Mo₂O₇. It was elucidated that the excellent photocatalytic performance of Ag₃PO₄/Ag/Ag₂Mo₂O₇ for the degradation of Rh B under visible light could be ascribed to the high specific surface area, the extended absorption in the visible light region resulting from the Ag₃PO₄/Ag loading, and the efficient separation of photogenerated electrons and holes through the ternary heterostrucure composed of Ag₃PO₄, Ag and Ag₂Mo₂O₇.     

取代基对多取代氮苄叉苯胺化合物分子桥键（CH=N）的13C NMR和1H NMR的影响

Fifty-three samples of multi-substituted benzylideneanilines XArCH=NArYs (abbreviated XBAYs) were synthesized and their NMR spectra were determined. An extensional study of substituent effects on the ¹H NMR chemical shifts (^δH(CH=N)) and ¹³C NMR chemical shifts (^δC(CH=N)) of the CH=N bridging group from di-substituted to multi-substituted XBAYs was made based on a total of 182 samples of XBAYs, together with the NMR data of other 129 samples of di-substituted XBAYs quoted from literatures. The results show that the substituent specific cross-interaction effect parameter (Δ(Σσ)²)plays an important role in quantifying the ^δC(CH=N) values of XBAYs, but it is negligible for quantifying the ^δH(CH=N) values; the other substituent parameters also present different influences on the ^δC(CH=N) and ^δH(CH=N). On the whole, the contributions of X and Y to the ^δC(CH=N) of XBAYs are balanced, but the ^δH(CH=N) values of XBAYs mainly rely on the contributions of X.     

微/纳米ZnO绒球的制备及其在自然光下催化降解有机染料性能

以谷氨酸氟硼酸(GluBF₄)离子液体水溶液为反应介质,以物质的量比为1:6的二水合醋酸锌[Zn(Ac)₂·2H₂O]和氢氧化钠为原料,室温下制备前驱体,再微波辅助加热制备了纳米氧化锌粉体,获得了纳米结构微米尺寸纳米ZnO绒球.利用场发射扫描电镜(FESEM)、X射线衍射(XRD)、比表面(BET)、能量色散谱(EDS)等对产物进行了表征.所得产物为六方晶系纤锌矿结构,粉体粒径20.4 nm,绒球比表面积为28.3 m²·g^-1,产物纯度较高,收率95.3%.同时探讨了纳米ZnO绒球生成的可能机理.该纳米材料在日光下显示较高的光催化活性和稳定性.分别配制浓度为10 mg·L^-1的100 mL甲基橙(MO)和甲基紫(MV)水溶液, 30 mg纳米氧化锌为光催化降解催化剂,太阳光激发下5 h脱色率分别达到74.3%和96.9%;溶液总有机碳(TOC)含量随光降解的进行缓慢下降;光催化剂重复利用5次,催化剂形貌不变、颜色不变,质量基本未发生变化.     

聚丙烯接枝己内酯型增容剂的合成及其共混增容应用

以含悬挂羟基的聚丙烯为引发剂,辛酸亚锡为催化剂催化己内酯开环聚合,成功制备了一系列支链为聚己内酯的功能化接枝聚丙烯,并通过核磁共振、红外光谱、示差扫描量热（DSC）和广角X射线衍射（WAXD）等技术手段对聚合物进行了明确的结构表征。 研究了反应温度和时间对接枝反应的影响,结果表明,最佳反应温度为90 ℃,通过改变接枝时间可以调控己内酯链段的长度。 将成功接枝的功能化聚丙烯用做聚丙烯与尼龙-6共混体系的增容剂,并通过扫描电子显微镜（SEM）观察的方法考察了该增容剂对共混体系的影响。 SEM 显示增容剂的加入显著地降低了界面张力,减小了分散相的尺寸,增强了界面的粘结性。     

长光程比色池-流动注射测定水中微量挥发酚

利用长光程比色池 流动注射系统快速测定水样中的微量挥发酚.该方法的检出限为0.232 μg·L^-1,相对标准偏差小于0.553%,相对误差小于0.185%,样品加标回收率在91.0%~99.8%,且标准曲线具有良好线性（r =0.999 9）.与传统国标方法（《水质挥发酚的测定4-氨基安替比林分光光度法》,HJ503-2009）相比,样品浓度测定偏差为2.59%~8.25%,在分析速率上,传统的国标方法约为5个·h^-1,而该方法分析速率达24个·h^-1,能满足大批量样品连续准确测定的要求,特别适合事故性的应急监测.     

目标物材料特性对激光语音获取的影响研究

为了扩大激光语音检测系统的应用场景,分析目标物材料参数对系统语音获取的影响,在完善语音获取中,语音信号从产生到与目标物作用的信号流程基础上,对目标物进行声致振动建模,以Sewell-Sharp-Cremer模型为基础,提出目标物声致振动幅度计算方法,并根据Matlab分析计算和实验对比了铁、铝、塑料、纸4种目标物的振幅及其对激光语音获取的影响。仿真及实验结果表明:目标物振幅在300 Hz～1 000 Hz呈指数型衰减,在1 000 Hz以上衰减趋于平缓;300 Hz处非金属材料振幅为69 nm和62 nm,高于金属材料的30 nm和10 nm。金属材料较非金属材料动态范围小,频率敏感度低,更适合作为语音获取的目标物。     

非晶铁磁纤维复合材料吸波性能的应力可调性实验研究

本文利用非晶铁磁纤维的应力阻抗效应,对基于玻璃包裹非晶铁磁纤维(CoFeNiSiB)的电磁复合材料的吸波性能,采用自由空间透射法进行了一系列实验研究,重点在于探究该电磁复合材料吸波性能的影响因素,特别是外加应力对吸波效果的调谐性研究。实验结果表明,非晶铁磁纤维电磁复合材料的透波率与纤维方向、密度、长度等因素有密切的关系,在电磁复合材料基体刚度较小的情况下,非晶铁磁纤维电磁复合材料的吸波性能具有较明显的应力调谐性。该研究在智能隐身材料、微波无损检测等领域都有着潜在的重大应用价值。