ATR-FTIR光谱技术在聚合物膜研究中的应用

红外光谱是聚合物研究中常用的一种表征手段，而衰减全反射红外光谱（ATR-FTIR）更是由于在研究聚合物薄膜方面具有显著的优势而被广泛使用。逐层组装（layer-by-layer Assembly）技术是一种常用的组装聚合物超薄膜的方法，ATR-FTIR光谱技术的引入可以在获取膜组装过程中相应信息的同时有效地避免表征过程中对样品的损害。另一方面，ATR-FTIR方法与二维相关光谱技术（two-dimensional correlation spectroscopy, 2D correlation spectroscopy）相结合也是研究小分子（主要是水分子）在聚合物薄膜中的渗透行为的有效手段。本文对ATR-FTIR的基本原理和显著特点作了介绍，并以实例阐述该方法在逐层组装技术和水分子在薄膜内渗透行为研究两方面的应用。     

LaNi4Fe催化合成氨反应性能的研究

用冶金法、还原扩散法、共沉淀法制得了LaNiFe,并对其催化合成氨反应性能进行了研究。实验结果表明:还原扩散法,共沉淀法制得的LaNi_4Fe催化活性均比冶金法好。X—射线分析指出LaNi_4Fe在合成氨反应过程中变为Ni_4Fe和LaN。     

PEMFC阴极中氧扩散和电化学反应模型研究—I．TFFA模型及其数值计算

将薄膜浸渍聚集体（TFFA）模型用于描述质子交换膜燃料电池（PEMFC）阴极中氧的扩散和反应过程，其中包括氧气在气体扩散层和反应层气体通道中的扩散，氧气在反应层薄膜中的溶解和扩散，氧在反应层浸渍聚休体中的扩散和反应以及电子和离子的传导，并根据PEMFC阴极的结构特点给出TFFA模型的数值解法。     

一种模拟沸石分子筛扩散反应的Monte Carlo方法

在考虑了沸石分子筛中吸附、脱附、扩散和反应的特点的基础上，发展了一种模拟沸石分子筛中扩菜反应的ＭｏｎｔｅＣａｒｌｏ方法。用Ｌａｎｇｍｕｉｒ吸附等温式验证了该方法的合理性，并证明了轰击频率λ代表了反应物气相压力，而吸附、脱附几率之比即为吸附平衡常数。同时，通过改变轰击频率λ和反应几率Ｐｔ，得到了吸附等温线和有效因子随Ｔｈｉｅｌｅ模数变化的曲线。     

低热固相反应的反应机理研究(1)--冷融熔机理和冷溶熔机理的模型

本文提出了低热固相反应的冷融熔机理和冷溶熔机理,其中冷融熔机理主要针对于不含结晶水的反应体系,冷溶熔机理主要针对于含结晶水的反应体系,并对低热固相反应动力学提出冷融熔/冷溶熔、扩散、反应、成核、生长的五步机理.两种机理都避开了分子在固相晶格中的扩散,从而对低热固相反应的扩散问题进行了有效的解释,并给出了低热固相反应的热力学和动力学判据.     

一个新颖三维配位聚合物Pb(1，4-napdc)(DMF)的合成、结构及热稳定性研究

A novel 3D metal-organic coordination polymer Pb(1,4-napdc)(DMF) (1,4-napdc=naphthalene-1,4-dicarboxylate) was synthesized at room temperature using slow vapor diffusion method to grow single crystal that has been analyzed by X-ray diffraction. The crystal belongs to orthorhombic with space group P2₁2₁2₁. The unit cell parameters are as fellows: a=0.701 3(2) nm, b=1.407 6(3) nm, c=1.521 5(4) nm, V=1.501 8(6) nm³ and Z=4. In the crystal structure of Pb(1,4-napdc)(DMF), the square grids constructed with paddle-wheel units of Pb(Ⅱ) and 1,4-napdc links stack over each other to generate infinite 3D network, which has square apertures (1.158×1.158 nm²) along the crystallographic a-axis. The thermal stability of compound was investigated by differential scanning calorimetry and thermogravimetric analysis. CCDC: 293617.     

室温熔盐二(三氟甲基磺酸酰)亚胺锂-尿素体系的分子动力学模拟

应用分子动力学模拟了25 ℃和50 ℃时新型室温熔盐二(三氟甲基磺酸酰)亚胺锂[LiN(SO2CF3)2, LiTFSI]与尿素(摩尔比为1:3.6)体系的结构与动力学性质. 在两个温度下体系的微观结构基本相同, Li+的配位数约为5, 且都是与溶剂和阴离子中的氧原子发生配位. 对TFSI-的研究表明, 每个TFSI-只提供四个氧中的一个与Li+配位; 而且在Li+的配位层中, TFSI-具有顺、反和gauche 等不同的构象, 并且不同构象出现的几率会随着温度的改变而改变.     

带电胶体离子扩散与交换动力学的比较

Taking soil colloid and hydrated silica (quartz sand) as the experimental material, the comparative study has been made on the kinetics of ion diffusion and ion exchange in charged colloid and charged coarse disperse systems. The results showed that ion exchange kinetics in the two systems conform to the kinetic law of ion diffusion. Besides, through this comparative study on the kinetics of ion exchange and ion diffusion, a method has been advanced theoretically to estimate the quantity of adsorbed ion that is located in the inner of the Helmholtz layer. As far as hydrated silica is concerned , there were about 33 per cent of the total adsorbed quantity of Mg2+that were located in the inner of the Helmholtz layer under the given experimental conditions, bu tfor soil colloid the percentage was only 7.5.     

聚乙撑二氧噻吩膜在氧化态的充电过程及电容研究

In this paper, the chronoamperometry was used to study the charging processes of polyethylenedioxythiophene (PEDOT) modified electrodes in the potential range where PEDOT was in the oxidized state. The results show that the charging behaviors of the PEDOT films are well agreed with the exhausted finite diffusion model. The dependence of the capacitance values of the films on potential and concentration of solution was also studied in this potential range.     

铌酸锂单晶光纤包层研究

通过镁离子内扩散铌酸锂单晶光纤，以改变晶纤表层的折射率，首次在国内实现了沿不同轴向生长、不同掺杂的铌酸锂单晶光纤的芯－包层波导结构。通过匹配扩散温度、扩散时间、ＭｇＯ膜厚等扩散参数及选择合适的晶纤直径，实现了晶纤具有阶跃和抛物折射率分布的包层，并对包层晶纤的模式特性进行了观察，得到低次模传输。