水中痕量镉的准液膜富集

准液膜法是在液膜法基础上提出的新分离方法，它保持了液膜法分离富集的高效能，但省去了液膜法的制乳与破乳过程，使操作更为简便易行。本文用此法富集了水及废水中痕量镉，富集倍数可达２３０倍，镉的回收率在９７％以上。     

Direct Synthesis, Crystal Structure and Thermal Kinetics of Supramolecular Complex [Co（H2O）6]·（Hnip）2·（H2nip）2·（DMA）2·（H2O）8 （nip=5-nitroisophthalate, DMA=CH3NHCH3）

The crystal of [Co（H2O）6]·（Hnip）2·（H2nip）2·（OMA）2·（H2O）8 has been cultured using direct method and characterized by X-ray single crystal diffractometry, elemental analysis and FTIR spectroscopy. It crystallizes in triclinic system, P-1 space group with the cell parameters of a=0.7012（1） nm, b=1.1378（2） nm, c=1.6612（3） nm, α= 84.92（3）°, β=85.19（3）°, γ=85.91（3）°, V= 1.3128（5） nm^3, Z=1, Dc= 1.573 g·cm^-3. Final R indices [1〉2σ（I）] are： R1 =0.0279, wR2=0.0765 while R indices for all data are： R1 =0.0327, wR2=0.0806. The Co coordination octahadra are each surrounded by two Hnip, two H2nip, two DMA and eight water molecules that are linked by hydrogen bonds and π-π stacking interactions. Thermal analyses of DSC and TG-DTG have been performed on the complex to predict its thermal decomposition mechanism and determine the most probable kinetic model function using Kissinger, Ozawa, integral and differential methods.     

铑配合物催化丁烯氢甲酰化性能的研究

制备了一系列铑配合物,并对其催化丁烯氢甲酰化的催化性能进行了研究.在1-丁烯的反应中,RhCl(PPh3)3和trans-RhCl(CO)(PPh3)2的反应速度很慢,而RhH(CO)(PPh3)3、Rh(CO)2(acac)和 Rh(CO)(acac)(PPh3)三者反应速度都很快.而不同丁烯原料氢甲酰化的反应速度也各不相同,反应速度依次为1-丁烯》2-丁烯》异丁烯.     

3, 6-二取代-均三唑并[3, 4-b]-1, 3, 4-噻二唑的合成

研究了2-苯基-1, 2, 3-三唑-4-羧酸(1)与3-烷基/芳基-4-氨基-5-巯基-1, 2, 4-三唑(2a～o)在POCl~3催化下, 脱水缩合得到15个新的3-烷基/芳基-6-(2'-苯基-1', 2', 3'-三唑-4'-基)均三唑并[3,4-b]-1, 3, 4-噻二唑类化合物(3a～o)。     

二茂铁硫醇自组装膜的电化学行为及其离子对效应

详细了研究１０－二基铁－１－癸硫醇（ＨＳＣ１０Ｆｃ）在金基底上形成的自组装单分子膜的电化学行为,发现ＨＳＣ１０Ｆｃ在金基底上形成稳定的自组装膜,并且在０．１ｍｏｌ／Ｌ的ＨＣｌＯ４溶液中表现出可逆的氧化还原行为,但其氧化还原峰的峰形和峰位极易溶液中阴离子种类和浓度的影响,考察了二茂铁自组装膜及通过后置换形成的二茂铁硫醇／十二烷基硫醇混合膜在混合电解液中的电化学行为,直接比较了两种不同阴离子与二茂铁阳     

游离氧化钙,氧化镁连续测定的电导法研究

研究了乙二醇对氧化钙，氧化镁的提取条件，利用乙二醇提取氧化钙后在催化剂存在下继续提取氧化镁，建立了电导法连续测定ＣａＯ，ＭｇＯ分析方法，可用于水泥熟料中游离氧化钙，氧化镁的测定。     

木材溶液中羟基与异氰酸酯反应的研究

以涂料工业广泛应用的新型助剂二元酸酯 (DBE)为液化试剂 ,盐酸为催化剂 ,将苯甲基化木材溶液化后 ,与不同结构的异氰酸酯反应 .利用FT IR及1 3C NMR分析液化苯甲基木质纤维素与不同结构异氰酸酯得到了聚氨酯树脂 ,证明了木材中羟基可以用来作为聚醚多元醇与异氰酸酯制备聚氨酯材料 .通过准确测量体系中游离的NCO含量 ,从而得出不同结构异氰酸酯与木材溶液中羟基的反应规律 .实验结果表明 ,异氰酸酯的存在大大促进了木材结构中羟基的释放 ,由于不同异氰酸酯的活性不同 ,使得羟基值变化亦不相同 ,其顺序为IPDI>HDI>TDI .为了保证最终的材料性能 ,选择TDI和IPDI作为木材溶液制备聚氨酯树脂的异氰酸酯组份较好     

Theoretical Study of the Low-Lying Excited States of Butoxy Radicals and Non-Radiative Decay Routes

The potential energy surfaces for the butoxy radical dissociation into R·＋O on the six low-lying electronic states have been determined with the combined CASSCF and MR-CI methods. The isomerization reactions between the different conformers of 1- and 2-butoxy radicals at the X and B states have been also investigated with the MP2, B3LYP, and CASSCF methods. The non-radiative decay mechanisms of butoxy radicals at the B state have been characterized with the computed potential energy surfaces and intersections. Supported by recent LIF experimental results, it was predicted that the t-butoxy radical would predissociate via the B/C intersection. As to 1- and 2-butoxy radicals, the relative energies of the transition states for the isomerization reactions between conformers at the B state are much lower than those of the B/C intersections, resulting in the predominance of the isomerization in the decay of the B state for 1- and 2-butoxy radicals.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer(OWPT) using a laser diode(LD)as a power transmitter. We investigate the characteristics of a solar cell and a photodiode(PD) as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maximum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.