Numerical study of growth competition between twin grains during directional solidification by using multi-phase field method

A multi-phase field model is established to simulate the growth competition and evolution behavior between seaweed and columnar dendrites during directional solidification.According to the effects of surface tension and interfacial energy,we quantitatively analyze the influences of factors such as inclination angles,pulling velocity,and anisotropic strength on twin growth.The results demonstrate that the pulling velocity and anisotropic strength have an important influence on the morphology and evolution of the seaweed and dendritic growth.The low pulling velocity and anisotropic strength are both key parameters for maintaining the stable morphology of seaweed during competitive growth in a bicrystal,showing that the lateral branching behavior is the root of the dendrites that can ultimately dominate the growth.And it is clarified that the lateral branching behavior and lateral blocking are the root causes of the final dominant growth of dendrites.With the increase of anisotropy strength,the seaweed is eliminated fastest in case 1,the seaweed is transformed into degenerate dendritic morphology,and eliminates the seaweed by promoting the generation and lateral growth of the lateral branches of the dendrites.The increase of pulling velocity is to increase the undercooling of favorable oriented grain and accelerate the growth rate of dendrites,thus producing more new primary dendrites for lateral expansion and accelerating the elimination rate of unfavorable oriented grain.     

高粱籽粒中多酚类物质的傅立叶变换近红外光谱分析

利用高效液相色谱(HPLC)法测定高粱籽粒中阿魏酸、原儿茶醛和花青素的含量,比色法测定总酚、总黄酮、缩合单宁的含量;运用偏最小二乘法建立NIR光谱与HPLC法和比色法分析值之间的多元校正模型,预测高粱籽粒中主要酚类物质的含量.结果表明,各成分近红外预测值与实测值之间的校正模型相关系数(R)、内部交叉验证均方差(RMSECV)、最佳主因子数分别为:总酚0.9737, 0.288, 4;总黄酮0.9660, 0.00671, 8;缩合单宁0.9558, 0.0289, 6;阿魏酸0.9818, 0.0391, 6;原儿茶醛0.9979, 0.0118, 5;花青素0.9977, 0.0523, 4;预测相对偏差(RSEP)分别为:总酚6.99%、总黄酮4.54%、 缩合单宁7.13%、阿魏酸2.68%、原儿茶醛5.46%、 花青素5.81%.结果表明,模型对样品NIR的预测值与其相应的化学值有较好的相关性,此模型可用来预测高粱籽粒中的各酚类物质的含量,在高粱优质育种和品质分析中具有广泛的应用价值.     

Element concentrations of dry-grind corn-processing streams

The dry-grind corn process is one of two technologies used to convert corn into ethanol. In his process, all kernel components are processed through several sequential steps, including fermentation. Only one coproduct (distillers’ dried grains with solubles [DDGS]) is available for marketing. DDGS provide income to offset costs of processing; issues that affect marketing have implications in the economic viability of dry-grind plants. Two issues relate to elements in DDGS: high concentrations and excessive variation. Data on element concentrations in dry-grind processing streams could be helpful in addressing these concerns. The objective of this study was to determine element concentrations in primary process streams from dry-grind plants. Samples of corn, ground corn, beer, wet grains, syrup, and DDGS were obtained from nine dry-grind plants, and element concentrations were determinined. The concentrations of most elements in corn were not different among processing plants and were similar to published data. However, for the processing streams, there were differences in several element concentrations among processing plants. The concentrations of most elements in beer were about three times those of corn, due to the disappearance of starch during fermentation. Syrup had the highest element concentrations. Variations in element contents of DDGS and parent streams were due to processing conditions and not corn. Appropriate processing of thin stillage (the parent stream of syrup) could reduce the element content of DDGS.     

Correlation of elastic wave attenuation and scattering with volumetric grain size distribution for polycrystals of statistically equiaxed grains

This study establishes an explicit relation between spatial two-point correlation function (TPCF) and volumetric (or three-dimensional) grain size distribution for aggregates of statistically equiaxed grains by extending a prior study (Sha, JASA, 2018). This relation is further validated by applying it to available TPCF and volumetric grain size distribution in the literature. Based on this relation, analytical attenuation coefficients for longitudinal and transverse waves, accounting for volumetric grain size distribution, are derived under Born approximation for macroscopically isotropic polycrystals of equiaxed triclinic grains. These attenuation models are applicable for whole frequency range except geometric region. Moreover, scattering coefficients for a polycrystal of equiaxed triclinic grains with a volumetric grain size distribution are obtained. Finally, the analytical attenuation model for the longitudinal wave is verified by comparison with existing 3D finite element simulation results in the literature. This theoretic study has practical applications to the inverse determination of volumetric grain size distribution from ultrasonic measurements.     

Grain refinement and strengthening of austenitic stainless steels during large strain cold rolling

The microstructure/texture evolution and strengthening of 316?L-type and 304?L-type austenitic stainless steels during cold rolling were studied. The cold rolling was accompanied by the deformation twinning and micro-shear banding followed by the strain-induced martensitic transformation, leading to nanocrystalline microstructures consisting of flattened austenite and martensite grains. The fraction of ultrafine grains can be expressed by a modified Johnson-Mehl-Avrami-Kolmogorov equation, while inverse exponential function holds as a first approximation between the mean grain size (austenite or martensite) and the total strain. The deformation austenite was characterised by the texture components of Brass, {011}<211>, Goss, {011}<100>, and S, {123}<634>, whereas the deformation martensite exhibited a strong {223}<110> texture component along with remarkable γ-fibre, <111>∥ND, with a maximum at {111}<211>. The grain refinement during cold rolling led to substantial strengthening, which could be expressed by a summation of the austenite and martensite strengthening contributions.     

钙钛矿薄膜气相制备的晶粒尺寸优化及高效光伏转换

钙钛矿薄膜的气相制备是一种极具潜力的工业化生产工艺,但薄膜的质量控制目前远落后于溶液制备法.本文通过建立PbI_2薄膜向钙钛矿薄膜完全转化过程中反应时间、晶粒尺寸与温度的关系,实现了薄膜的质量优化及大面积钙钛矿薄膜的制备,将薄膜的平均晶粒粒径从0.42μm优化到0.81μm.基于空间电荷限制电流模型对缺陷密度的研究显示,钙钛矿薄膜的缺陷密度由5.90×10~(16)cm~(–3)降低到2.66×10~(16)cm~(–3).光伏器件(FTO/TiO_2/C_(60)/MAPbI_3/spiro-OMeTAD/Au结构)测试显示,面积为0.045cm~2器件的平均光电转换效率从14.00%提升到17.42%,最佳光电转换效率达到17.80%,迟滞因子减小至4.04%.同时,基于180℃制备的1cm~2器件的光电转换效率达到13.17%.     

Effect of annealing temperature on the decomposition of reactively sputtered Ag2Cu2O3 films

Ag₂Cu₂O₃ films were deposited on glass substrates by reactive sputtering of a composite silver-copper target. The deposited films were annealed in air at 100, 200 and 300 °C. The structure of the films was studied using X-ray diffraction (XRD), their surface morphology was characterised using scanning electron microscopy (SEM) and their electrical resistivity at room temperature was measured using the four point probe method. The 100 °C annealing did not modify either the film structure or the film morphology. On the other hand, Ag₂Cu₂O₃ films were partially decomposed into Ag and CuO after a 200 °C annealing. The decomposition was complete for a 300 °C annealing. The evolution of the film surface morphology as a function of the annealing temperature was discussed in connection to the evolution of the molar volume of the phases constituting the films.     

金属小粒子不同自旋态超导电性统计系综研究

用统计系综理论对遵从高斯正交系综的所有金属小粒子的不同自旋态Sz=0,12,1,32,2,52,…进行了研究.发现以上各态均存在临界能间距dcΔ(0)=1381,185,081,050,036,028,…随粒子尺寸的减小,其超导电性终究会消失;金属小粒子的自旋态越高,临界能间距dc越小.对自旋S=0的态,确实存在超导增强效应. 关键词： 金属小粒子 超导电性 无规矩阵     

Optical colours and polarization of a model reflection nebula. III. Composite and mixture of grains in the nebula with the star in the rear

The colour differences between the star and the associated reflection nebula and polarization caused by core mantle grains and mixture of grains have been given. They are based on homogeneous plane-parallel slab-model of the nebula with the star in the rear. The composite particles in the form of concentric spheres consist of homogeneous core of graphite, silicate or SiC and homogeneous mantle of ice. The effect of varying the core and mantle radii has been studied. The mixtures of grains composed of ice, silicate, graphite and SiC in various proportions have also been considered. Each of these grain species has been considered with exp(−a ³) type of size distribution function. The wavelength dependent indices of refraction have been used throughout.     

Effect of levitated dust kinetics in the dynamic evolution of inhomogeneous plasma sheath

The main goal here is to study theoretically the formation of plasma sheath in an inhomogeneous dusty plasma. The effect of weak ionization of the dust grains as similar to the Townsend discharge has been incorporated to see how it influences the evolution of sheath. Sheath equation has been derived to describe the properties of sheath structures analytically and numerically. It has shown that the ionization along with the inhomogeneity affects significantly the growth of sheath which has been highlighted elaborately for some typical plasma parameters. After getting well defined sheath region, dynamical behaviour of levitated dust grains into the sheath has been studied. The totality of the findings has been centred around the estimation of dust surface potential, dust sizes along with the generation of net force on dust grains. Both inhomogeneous and ionization effects allow the dust grains in acquiring different potential to sustain equilibrium in different places. As a result of this, nebulons and the dust cloudlike structures are electrically charged.