三聚氰胺修饰玻碳电极用于溶出伏安法测定水样中痕量银

用电化学沉积法将三聚氰胺修饰在玻碳电极上,应用此三聚氰胺修饰玻碳电极测定银时,试液在pH 4.6的乙酸-乙酸钠缓冲溶液中,在—0.45V处还原60 s,然后在0～+0.6V范围内扫描,使银离子从修饰电极上溶出,实现了水样中银离子的溶出伏安法测定,在+0.27V处可得银离子的氧化峰电位,银的浓度在6.0×10~(-9)～5.0×10~(-7)mol·L~(-1)范围内与其峰电流呈线性关系,检出限(3S/N)为1.0×10~(-9)mol·L~(-1)。方法用于实际水样中痕量银的测定,加标回收率在90.0%～96.0%之间。     

Esterification of levulinic acid to n-butyl levulinate over heteropolyacid supported on acid-treated clay

Levulinic acid has been identified as a promising green, biomass-derived platform chemical. n-Butyl levulinate is used as an important intermediate having diverse applications. The present work focuses on the synthesis of n-butyl levulinate by esterification of levulinic acid with n-butanol using heteropolyacid (HPA) supported on acid-treated clay montmorillonite (K10). 20% (w/w) dodecatungestophosphoric acid (DTPA) supported on K10 was found to be the most efficient catalyst with 97% levulinic acid conversion and 100% selectivity towards n-butyl levulinate. Effects of various process parameters were studied to examine the efficacy of 20% (w/w) DTPA/K10 for optimization of the activity.     

多壁碳纳米管-酰基吡唑啉酮复合膜修饰电极测定异烟肼

报道了一种修饰电极--多壁碳纳米管-酰基吡唑啉酮复合膜修饰玻碳电极(MWNTs/HPMαFP/GCE ),研究了异烟肼在此修饰电极上的电化学行为及反应机理.与裸GCE和MWNTs/GCE相比,异烟肼在MWNTs/HPMαFP/GCE上的氧化峰电流和检测灵敏度大大提高,表明多壁碳纳米管和酰基吡唑啉酮产生了协同增效作用.在...     

顺铂前药接枝修饰硫代DNA及其自组装靶向纳米药物研究

选用具有良好生物相容性的硫代修饰嵌段核酸为载体,将其非硫代修饰部分设计为靶向MUC-1蛋白的核酸适配体序列,同时在其硫代修饰部分通过硫代磷酸酯基团（Phosphorothioate,PS）接枝修饰四价顺铂前药,制备了两亲性核酸-顺铂前药缀合物MUC-1/^PODNA-b-（^PSDNA-g-Pt）,并进一步自组装成类似球形核酸（Spherical nucleic acid,SNA）的含铂靶向纳米药物（MUC-1/Pt-SNAs）.结果表明,该纳米药物递送体系载药率高、形貌稳定、分散性好,能够高效靶向MUC-1蛋白过表达的MCF-7乳腺癌细胞,并在体内外实验中表现出优异的抗肿瘤效果和极低的毒副作用.     

硝酸根接枝诱导组装金红石相TiO2纳米束以增强光催化产氢（英文）

化石燃料的快速消耗加速了全球能源危机和环境污染等问题.光催化产氢直接利用清洁和可持续的太阳能实现向化学燃料的转化,因而成为一种有前景的技术.众多半导体光催化剂中,二氧化钛因其高光催化活性、稳定的化学性质、低成本和无毒等优势而被广泛用作分解水产氢的光催化剂.最近,金红石相TiO2纳米晶体在某些情况下被证明具有光催化的潜力,然而其光生电子-空穴对的快速复合显著抑制了光催化效率.表面修饰、构建异质结和负载助催化剂等策略被用来提高光生载流子的分离效率以减少复合损失,从而提升光催化活性.由于光催化反应通常发生在光催化剂的表面活性位点上,因此通过改善表面性质改变电荷转移途径对光催化活性具有重要影响.磷酸、硫酸、硼酸和盐酸等无机酸的修饰可以改变光催化剂的表面基团,分别通过促进表面羟基的形成和氧气的吸附以及改变表面电荷性质更有效地捕获空穴,实现光生电子和空穴的分离,有助于光催化降解有机污染物.然而,这种影响机制显然不适用于光催化产氢体系,目前对无机酸修饰用于分解水产氢的研究鲜有报道.因此,通过酸改性策略制备高效产氢的光催化剂仍然是一个相当大的挑战.本文利用硝酸诱导策略合成纺锤状金红石相二氧化钛纳米束(R-TiO2).首先,制备层状质子化钛酸盐(LPT)作为TiO2的前体,随后,加入浓硝酸以诱导向金红石相TiO2的转变,并组装形成纺锤状纳米束.对照实验显示,硝酸的酸化可以诱导LPT向金红石相TiO2的转变,而相同条件下浓硝酸后处理不会引起晶相的转变.纺锤形纳米束的形成源于,硝酸诱导R-TiO2沿(110)方向生长并彼此粘附,硝酸诱导组装过程成功在TiO2表面修饰上硝酸根,同时扩大了光吸收范围,有效减少了电荷复合损失.光催化产氢测试证明了R-TiO2光催化剂具有高效的产氢性能,产氢速率为402.4μmol h-1,是Degussa P25的3.1倍,并且显著高于未经浓硝酸处理的锐钛矿(52.0μmol h^-1)或金红石相(110.8μmol h^-1)光催化剂.为了说明表面硝酸根的影响,分别从晶体和化学结构、形态以及表面电荷性质方面比较了光催化反应前后的变化,结果表明,R-TiO2增强的光催化效率可归因于硝酸根基团的负场效应,有利于在表面上捕获带正电的质子以促进载流子分离,提高光催化产氢的效率.总之,本工作不仅对于发展表面修饰策略制备高效产氢光催化剂的研究具有重要意义,而且提出了一种不同于文献报道的无机酸影响机制.     

面向脑机接口的犹他神经电极技术

A human brain is composed of a large number of interconnected neurons forming a neural network. To study the functional mechanism of the neural network, it is necessary to record the activity of individual neurons over a large area simultaneously. Brain-computer interface (BCI) refers to the connection established between the human/animal brain and computers/other electronic devices, which enables direct interaction between the brain and external devices. It plays an important role in understanding, protecting, and simulating the brain, especially in helping patients with neurological disorders to restore their impaired motor and sensory functions. Neural electrodes are electrophysiological devices that form the core of BCI, which convert neuronal electrical signals (carried by ions) into general electrical signals (carried by electrons). They can record or interfere with the state of neural activity. The Utah Electrode Array (UEA) designed by the University of Utah is a mainstream neural electrode fabricated by bulk micromachining. Its unique three-dimensional needle-like structure enables each electrode to obtain high spatiotemporal resolution and good insulation between each other. After implantation, the tip of each electrode affects only a small group of neurons around it even allowing to record the action potential of a single neuron. The availability of a large number of electrodes, high quality of signals, and long service life has made UEA the first choice for collecting neuronal signals. Moreover, UEA is the only implantable neural electrode that can record signals in the human cerebral cortex. This article mainly serves as an introduction to the construction, manufacturing process, and functioning of UEA, with a focus on the research progress in fabricating high-density electrode arrays, wireless neural interfaces, and optrode arrays using silicon, glass, and metal as that material of construction. We also discuss the surface modification techniques that can be used to reduce the electrode impedance, minimize the rejection by brain tissue, and improve the corrosion resistance of the electrode. In addition, we summarize the clinical applications where patients can control external devices and get sensory feedback by implanting UEA. Furthermore, we discuss the challenges faced by existing electrodes such as the difficulty in increasing electrode density, poor response of integrated wireless neural interface, and the problems of biocompatibility. To achieve stability and durability of the electrode, advancements in both material science and manufacturing technology are required. We hope that this review can broaden the scope of ideas for the development of UEA. The realization of a fully implantable neural microsystem can contribute to an improved understanding of the functional mechanisms of the neural network and treatment of neurological diseases.     

聚对氨基苯磺酸/石墨烯电化学修饰电极检测药物中氧氟沙星

基于石墨烯纳米材料和循环伏安法技术制备了聚对氨基苯磺酸/石墨烯修饰电极并研究了氧氟沙星(OFL)在该修饰电极上的电化学行为,建立了一种简单快速灵敏测定氧氟沙星的电化学分析方法。 结果表明,与玻碳电极相比,对氨基苯磺酸/石墨烯电化学修饰电极能显著提高氧氟沙星的峰电流。 在优化条件下,其检测线性范围为1~600 μmol/L,最低检测限为(S/N=3)0.33μmol/L。 该修饰电极具有较好的重现性和稳定性,用于实际样品氧氟沙星滴眼液的测定,效果良好。     

双席夫碱铜配合物修饰玻碳电极用于碳酸饮料中苯甲酸的测定

利用溶液法制备双席夫碱铜配合物(M),采用电沉积法将制备的M沉积在玻碳电极(GCE)上制备了双席夫碱铜配合物修饰电极(M/GCE),用于测定碳酸饮料中的苯甲酸的含量。元素分析和红外光谱结果显示,试验成功制备了M;电沉积过程循环伏安曲线变化结果显示M已成功沉积在了GCE表面;扫描电镜(SEM)结果显示M/GCE表面已形成了一层聚合物膜。三电极体系选用M/GCE(工作电极)、饱和甘汞电极(参比电极)、铂丝电极(辅助电极);支持电解质采用0.1mol·L~(-1) KCl溶液;电化学方法选用循环伏安法(CV),扫描速率为50mV·s~(-1)。结果表明,苯甲酸在M/GCE上的氧化峰电位和还原峰电位分别位于-0.007,-0.359V附近,电极反应可逆性良好,受扩散控制。苯甲酸浓度与其对应的氧化峰电流在0.001 0～2.000 0mmol·L~(-1)内呈线性关系,检出限(3S/N)为0.27μmol·L~(-1)。将电极在4℃下放置7d后,苯甲酸氧化峰电流下降了4.8%。以雪碧样品为基质进行了加标回收试验,回收率为97.6%～102%,测定值的相对标准偏差(n=5)为1.2%。     

共轭聚合物荧光纳米粒子研究进展

近年来,共轭聚合物荧光纳米粒子因其优异的光学性能,在化学、医学和环境科学等研究领域显示了极其广阔的应用前景.相比于传统无机半导体荧光纳米材料,共轭聚合物荧光纳米粒子具有结构多样性、功能可设计性、生物相容性好等显著优势.本文从共轭聚合物荧光粒子的制备方法、光学性能、表面功能化修饰出发,重点讨论了近年来共轭聚合物纳米粒子作为荧光探针在细胞成像及生物化学检测方面的研究进展,阐述了当前研究的主要发展方向和仍需解决的问题.     

类蛋白反应修饰海地瓜酶解物及ACE抑制肽的制备

采用类蛋白反应修饰海地瓜体壁蛋白酶解物,制得修饰肽的血管紧张素转换酶(ACE)抑制活性与原酶解液的活性相比显著提高;模拟消化实验结果表明,修饰肽与胃肠蛋白酶作用后可增强其降压活性;细胞毒性实验结果表明,样品浓度在低于10 mg/mL时对犬肾细胞(MDCK)无毒性,且低浓度可以促进细胞生长.采用超滤、Sephadex G-15凝胶柱层析和RP-HPLC等分离技术纯化修饰产物,得到高活性ACE抑制肽(IC50值为3.67μmol/L),序列结构为NQNFVQYTTNT.紫外光谱分析结果表明,修饰肽与ACE结合可引起吸光度变化.用SYBYL软件对抑制肽与ACE活性位点进行模拟对接,发现该抑制肽能与ACE很好地结合.