Interfacial and Thermodynamic Properties of Formation of Water‐in‐Oil Microemulsions with Surfactants (SDS and CTAB) and Cosurfactants (n‐Alkanols C5–C9)

The interfacial and thermodynamic properties of water‐in‐oil microemulsion systems consisting of water, isopropyl myristate, n‐alkanol, and surfactant have been investigated using the method of dilution. The surfactants used were hexadecyl trimethylammonium bromide and sodium dodecylsulfate, and the cosurfactants were n‐alkanols with varying chain length from (C₅–C₉). The distribution of cosurfactant (n‐alkanol) between the interface of water and oil regions at the threshold level of stability as well as the energetics of the transfer of the cosurfactant from the oil to the interfacial region have been examined as a function of varying cosurfactant chain length (C₄–C₉) and temperature. The structural parameters (including dimension, population density and effective water pool radius) of the dispersed water droplets in the oil phase have also been evaluated and correlated with alkanol chain length.     

Adsorption of Corrosion Inhibitors onto Iron Carbonate (FeCO3) Studied by Zeta Potential Measurements

The adsorption of cetyl trimethyl ammonium bromide (CTAB) and two commercial inhibitor base chemicals, an oleic imidazoline salt (OI) and a phosphate ester (PE), onto iron carbonate (FeCO₃), was studied by zeta potential measurements in a 0.1 wt% sodium chloride (NaCl) solution under 1 bar CO₂ at 22°C, in the absence and presence of a refined low-aromatic oil. The zeta potential of oil-in-water emulsion droplets was also determined. Surface tension of 0.1 wt% and 3 wt% brines was measured as a function of inhibitor concentration. The isoelectric point was pH 6.0 in the 0.1 wt% NaCl solution under 1 bar CO₂. The results show that all three inhibitor compounds adsorbed onto the iron carbonate particles both at pH 4.0 and pH 6.0. Adsorption on both negatively charged surfaces and surfaces with no charge were thus found for all inhibitors. The addition of oil had no significant effect on the measured zeta potential on iron carbonate particles.     

Structure peculiarities and optical properties of nanocomposite: 5CB liquid crystal–CTAB-modified montmorillonite clay

The effects of the modification of natural layered montmorillonite (MMT) clay by cetyltrimethylammonium bromide (CTAB) cations on the structure and optical properties of the composite material based on this mineral (4.5%mass) and a nematic liquid crystal (LC), 4-pentyl-4'-cyanobiphenyl (5CB), have been investigated. As shown by small-angle X-ray diffraction and infrared (IR) spectroscopy experiments, this modification results in a significant expansion of the interplane spaces in the MMT nanoparticles and a considerable growth of their surface affinity to the 5CB molecules, which allows the LC molecules to penetrate into the MMT galleries and additionally expand these galleries. According to IR studies, this heterosystem possesses van der Waals interactions between its components on the phase separation boundary and, as a result, orientation alignment of the molecules in the near-surface layers occurs. These interactions specify the electro-optical properties of the composite. When an electric field is applied to a system, the light transmittance of the material increases due to the induced orientation of the LC dimers. This LC ordering remains even after the voltage is shut off, i.e. the system shows an electro-optical memory effect.     

片层花状氧化镁的制备及其吸附性能研究

本文以十六烷基三甲基溴化铵(CTAB)作为结构导向剂,利用尿素在高温条件下受热分解生成的二氧化碳与氯化镁反应,通过层-层自组装制备出具有片层花状结构的氧化镁,并以其对含Pb(Ⅱ)溶液的吸附为探针反应,研究其对重金属离子的吸附性能。实验结果表明,所制备氧化镁的前驱体为碱式碳酸镁;经过600℃焙烧后,得到的片层花状氧化镁比表面积大于60 m2.g-1,具有良好的吸附性能;对含Pb(II)溶液的吸附过程符合Langmuir等温吸附,最大吸附量达到320 mg.g-1。     

Micelle-induced multiple performance improvement of fluorescent probes for H2S detection

In this paper, two colorimetric and turn-on fluorescent probes N-[2-(2-hydroxy)-ethoxy] ethyl-4-azido-1,8-naphthalimide (SS1) and N-butyl-4-azido-1,8-naphthalimide (SS2) for selective recognition of H₂S were designed and synthesized. The probes were constructed by incorporating an azido group into the naphthalimide fluorophore as a specifical reaction group for sulfide utilizing its reducing property. Once treated with H₂S, the azido groups of the probes were converted to amino groups and the solutions’ color changed from colorless to yellow companied with a strong yellow-green fluorescence. Rapid and sensitive responses of the probes towards H₂S were achieved in the presence of cationic surfactant cetyltrimethyl ammonium bromide (CTAB): the reaction was completed within 10 min in CTAB compared to more than 4 h in buffer solution, and the detection limit decreased from 0.5 μM to 20 nM. High selectivity and good competition of both probes towards H₂S over other 11 ions and 2 reducing agents were realized in CTAB micelle. An overall linear concentration range of 0.05 μM to 1 mM was achieved with the assistance of differently charged surfactants CTAB and sodium dodecyl sulfate (SDS). The probes were applied to rapidly and sensitively detect H₂S levels in fetal bovine serum without any pretreatment of the sample.     

Effects of Cetyltrimethylammonium Bromide and Heptane on the Surface Properties and CO2 Adsorption of Zeolite NaX

Zeolite X was synthesized by the gelation method for use as a CO₂ adsorbent. The zeolite was prepared from a sodium silicate solution and Al(OH )₃ as silicon and aluminum source, respectively. The effects of cetyltrimethylammonium bromide (CTAB ) and heptane addition on surface properties, morphology, and CO₂ adsorption capacities were investigated. The CO₂ adsorption capacity of the synthesized zeolite with the addition of CTAB and heptane increased as demonstrated by the higher CO₂ uptake (3.00 mmol/g), which was due to the higher surface area and pore volume. Interaction between CTAB micelles and sodium cations with aluminosilicate anions led to an increase in the nucleation rate and smaller crystalline sizes. The addition of heptane resulted in higher positively charged CTAB micelles and improved the affinity between the micelles and aluminosilicate anions.     

Effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant and a cationic conventional (monomeric) surfactant

Herein we report the effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide) (16-6-16), and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB) in aqueous solutions. In absence and presence of (chloride salt) MCl (where M?Li, Na, and K) electrolytes, the critical micelle concentration (CMC) of mixed (16-6-16 + CTAB) surfactants was measured by surface tension measurements. With increasing the concentration of electrolyte, the CMCs were increasing. The surface properties and the thermodynamic parameters of the mixed micellar systems were also evaluated. From these evaluated thermodynamic parameters, it was found that in presence of electrolyte the stability of the mixed micellar system is more.     

Interaction of Thyroxine with 7 Hydroxycoumarin: A Fluorescence Quenching Study

The interaction between thyroxine hormone and 7 hydroxycoumarin (7HC) was investigated using fluorescence quenching method. The experimental results showed that thyroxine could quench the fluorescence of 7HC by forming the 7HC–thyroxine complex with static quenching. The apparent binding constants (K) between 7HC and thyroxine were determined to be 1.51 × 10⁴ (297 K) and 9.06 × 10³ (310 K). The binding sites (n) 0.98 ± 0.1. The thermodynamic parameters showed that the interaction between 7HC and thyroxine was driven mainly by hydrogen bonding interactions and van der Waals force. Calibration for thyroxine, based on quenching titration data, was linear in the concentration range 2.0 × 10⁻⁸ to 3.0 × 10⁻⁷ mol/l. The relative standard deviation was 2.58% for 2.0 × 10⁻⁷ mol/l thyroxine (n = 4) and the 3σ limit of detection was 3.42 × 10⁻⁸ mol/l in cationic surfactant CTAB medium.