水热法制备ZnS纳米线

以十六烷基三甲基溴化铵(CTAB)为表面活性剂，利用水热法通过二吡啶硫氰酸锌分解制备了ZnS纳米线，并用SEM、XRD、EDX和HR-TEM等方法对其纳米结构进行了表征。实验结果表明，反应时间和表面活性剂浓度是决定纳米ZnS最终形貌的关键因素，CTAB起到了纳米线生长的分子-诱导模板作用。     

Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

We describe here that fine control of nanoparticle shape and size can be achieved by systematic varia-tion of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly mono-disperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.     

介孔碳负载铂催化剂的分散性和电催化活性

以介孔硅SBA-15为模板, 糠醇为碳源制备了高度有序的介孔碳(CMK-5), 并用微波法合成碳负载的铂纳米粒子的催化剂. 为改善铂微粒的分散性能, 在微波碳载过程中添加了适量的阳离子表面活性剂(CTAB). XRD和TEM测试结果表明, CTAB的加入改善了铂催化剂的分散性, 且使铂微粒的平均粒径降至2.9 nm左右. 循环伏安测试结果显示, 加入CTAB后所得Pt/CMK-5催化剂的电化学活性面积大于未加CTAB的以及商业Johnson Matthey公司的Pt/C催化剂的活性面积.     

The effect of particle concentration on zeta potential in extremely dilute solutions

The electroporetic mobility of hexadecane particles in water and in very dilute CTAB solutions was measured. The technique of microelectrophoresis was applied. Zeta potential was calculated according to the Hückel formula, applying Henry's correction factors. Electrokinetic charge density was calculated according to the formula used by Delgado et al., and previously discovered empiricaly by Loeb et al. and derived mathematicaly by Ohshima et al. It was found that the particle concentration in emulsion limits their charge in solutions of very low ion concentration (10^–7:10^–6 M), because the greater the particle concentration, the smaller the extent of the ions adsorbed at the surface of one particle. The zeta potential was found to be independent of particle concentration if the ratio of the number of bulk ions to particle number is not lower than 1.6×10⁶. This ratio depends on particle size, and the value 1.6×10⁶ relates to particles of diameter 1.6 m.     

The Adsorption Kinetics of Cethyltrimethylammonium Bromide (CTAB) onto Powdered Active Carbon

This study investigates the adsorption kinetics of CTAB (cethyltrimethylammonium bromide), a cationic surfactant, onto PAC from aqueous solution with respect to the initial CTAB concentration at 20C. The pseudo-first-order, second-order kinetic models and intraparticle diffusion model were used to describe the kinetic data and the rate constants were calculated. The rate parameter, k_i, of intraparticle diffusion, the rate parameter, k₂, of the pseudo-second-order and k₁, the rate parameter for the pseudo-first-order mechanism were compared. It was found that the pseudo-second-order adsorption mechanism is predominant and the overall rate of the CTAB adsorption process appears to be controlled by more than one step, namely both the external mass transfer and intraparticle diffusion mechanisms.     

Study of the interaction between polyphenol,quercetin and three micelles with different electric charges in acidic and aqueous media

The interactions between the polyphenol quercetin, Q, with three surfactant aggregates with different electric charges named micelles, were studied in aqueous solutions with pH values 4.7 and 7.0, to determine the following parameters: critical micellar concentration (CMC), micelle size and binding constant of the complex (Q-Micelle) proposing interaction sites for the formation of the complex. The surfactants used were: hexadecyltrimethyl ammonium bromide (cationic surfactant), CTAB, sodium dodecyl sulfate (anionic surfactant), SDS, and triton X-100 (non-ionic surfactant), TX100, used as Q fluorescence promoters to determine the CMC. The CMC values of the above surfactants at pH 4.7 were: 0.80 ± 0.10, 1.39 ± 0.07 and 0.59 ± 0.05 mM respectively, being lower than those reported in the water. With dynamic light scattering measurements, the hydrodynamic diameters of each micelle were calculated resulting in values of: 2.4 ± 0.5, 5.0 ± 1.1 and 8.4 ± 4.3 nm at pH 4.7 and: 2.1 ± 0.4, 4.9 ± 1.1 and 11.5 ± 4.1 nm at pH 7.0 respectively. In addition, the binding constants of the complex (Q-Micelle) with 1:1 stoichiometry were calculated from emission fluorescence data giving Log K values: 2.94 ± 0.02, 2.54 ± 0.02, and 3.63 ± 0.05 M^-1 respectively. Finally, from the experimental data by UV–Vis spectrophotometry, the change in the behavior of the Q spectrum upon the addition of each of the surfactants to the system was analyzed, showing a decrease in absorbance when SDS and TX100 were added in an acidic medium, as a consequence of the photo-instability of the drug, suggesting that Q interacts with the outside of these micelles and is not fully incorporated inside them.     

Effects of Cetyltrimethylammonium Bromide and Heptane on the Surface Properties and CO2 Adsorption of Zeolite NaX

Zeolite X was synthesized by the gelation method for use as a CO₂ adsorbent. The zeolite was prepared from a sodium silicate solution and Al(OH )₃ as silicon and aluminum source, respectively. The effects of cetyltrimethylammonium bromide (CTAB ) and heptane addition on surface properties, morphology, and CO₂ adsorption capacities were investigated. The CO₂ adsorption capacity of the synthesized zeolite with the addition of CTAB and heptane increased as demonstrated by the higher CO₂ uptake (3.00 mmol/g), which was due to the higher surface area and pore volume. Interaction between CTAB micelles and sodium cations with aluminosilicate anions led to an increase in the nucleation rate and smaller crystalline sizes. The addition of heptane resulted in higher positively charged CTAB micelles and improved the affinity between the micelles and aluminosilicate anions.     

Effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant and a cationic conventional (monomeric) surfactant

Herein we report the effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide) (16-6-16), and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB) in aqueous solutions. In absence and presence of (chloride salt) MCl (where M?Li, Na, and K) electrolytes, the critical micelle concentration (CMC) of mixed (16-6-16 + CTAB) surfactants was measured by surface tension measurements. With increasing the concentration of electrolyte, the CMCs were increasing. The surface properties and the thermodynamic parameters of the mixed micellar systems were also evaluated. From these evaluated thermodynamic parameters, it was found that in presence of electrolyte the stability of the mixed micellar system is more.     

Micelle-induced multiple performance improvement of fluorescent probes for H2S detection

In this paper, two colorimetric and turn-on fluorescent probes N-[2-(2-hydroxy)-ethoxy] ethyl-4-azido-1,8-naphthalimide (SS1) and N-butyl-4-azido-1,8-naphthalimide (SS2) for selective recognition of H₂S were designed and synthesized. The probes were constructed by incorporating an azido group into the naphthalimide fluorophore as a specifical reaction group for sulfide utilizing its reducing property. Once treated with H₂S, the azido groups of the probes were converted to amino groups and the solutions’ color changed from colorless to yellow companied with a strong yellow-green fluorescence. Rapid and sensitive responses of the probes towards H₂S were achieved in the presence of cationic surfactant cetyltrimethyl ammonium bromide (CTAB): the reaction was completed within 10 min in CTAB compared to more than 4 h in buffer solution, and the detection limit decreased from 0.5 μM to 20 nM. High selectivity and good competition of both probes towards H₂S over other 11 ions and 2 reducing agents were realized in CTAB micelle. An overall linear concentration range of 0.05 μM to 1 mM was achieved with the assistance of differently charged surfactants CTAB and sodium dodecyl sulfate (SDS). The probes were applied to rapidly and sensitively detect H₂S levels in fetal bovine serum without any pretreatment of the sample.     

Adsorption of Corrosion Inhibitors onto Iron Carbonate (FeCO3) Studied by Zeta Potential Measurements

The adsorption of cetyl trimethyl ammonium bromide (CTAB) and two commercial inhibitor base chemicals, an oleic imidazoline salt (OI) and a phosphate ester (PE), onto iron carbonate (FeCO₃), was studied by zeta potential measurements in a 0.1 wt% sodium chloride (NaCl) solution under 1 bar CO₂ at 22°C, in the absence and presence of a refined low-aromatic oil. The zeta potential of oil-in-water emulsion droplets was also determined. Surface tension of 0.1 wt% and 3 wt% brines was measured as a function of inhibitor concentration. The isoelectric point was pH 6.0 in the 0.1 wt% NaCl solution under 1 bar CO₂. The results show that all three inhibitor compounds adsorbed onto the iron carbonate particles both at pH 4.0 and pH 6.0. Adsorption on both negatively charged surfaces and surfaces with no charge were thus found for all inhibitors. The addition of oil had no significant effect on the measured zeta potential on iron carbonate particles.