Structural characterization of silver dialkylphosphite salts using solid‐state 109Ag and 31P NMR spectroscopy,IR spectroscopy and DFT calculations

High‐resolution solid‐state ¹⁰⁹Ag and ³¹P NMR spectroscopy was used to investigate a series of silver dialkylphosphite salts, Ag(O)P(OR)₂ (R = CH₃, C₂H₅, C₄H₉ and C₈H₁₇), and determine whether they adopt keto, enol or dimer structures in the solid state. The silver chemical shift, CS, tensors and |J(¹⁰⁹Ag, ³¹P)| values for these salts were determined using ¹⁰⁹Ag (Ξ = 4.652%) NMR spectroscopy. The magnitudes of J(¹⁰⁹Ag, ³¹P) range from 1250 ± 10 to 1318 ± 10 Hz and are the largest reported so far. These values indicate that phosphorus is directly bonded to silver for all these salts and thus exclude the enol structure. All ³¹P NMR spectra exhibit splittings due to indirect spin–spin coupling to ¹⁰⁷Ag (I = 1/2, NA = 51.8%) and ¹⁰⁹Ag (I = 1/2, NA = 48.2%). The ¹J(¹⁰⁹Ag, ³¹P) values measured by both ¹⁰⁹Ag and ³¹P NMR spectroscopy agree within experimental error. Analysis of ³¹P NMR spectra of stationary samples for these salts allowed the determination of the phosphorus CS tensors. The absence of characteristic P?O stretching absorption bands near 1250 cm^?1 in the IR spectra for these salts exclude the simple keto tautomer. Thus, the combination of solid‐state NMR and IR results indicate that these silver dialkylphosphite salts probably have a dimer structure. Values of silver and phosphorus CS tensors as well as ¹J(¹⁰⁹Ag, ³¹P) values for a dimer model calculated using the density functional theory (DFT) method are in agreement with the experimental observations. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorption of bromide at the Ag(100) electrode surface

The adsorption and phase formation of bromide on Ag(100) has been studied by chronocoulometry and surface X-ray scattering (SXS). With increasing electrode potential, bromide undergoes a phase transition from a lattice gas to an ordered c(2×2) structure (θ=0.5). The degree of lateral disorder was estimated by comparing the SXS- and the electrochemical measurements. Based on chronocoulometric experiments, a thermodynamic analysis of charge density data was performed to describe the bromide adsorption at the Ag(100) electrode. The Gibbs surfaces excess, electrosorption valencies, Esin–Markov coefficients, and the Gibbs energy of adsorption, lateral interaction energies as well as surface dipole moments have been estimated. The experimental θ versus E- isotherms are modeled employing (i) a quasi-chemical approximation as well as (ii) the results of a recent Monte Carlo simulation. An attempt is made to discuss the structure data and thermodynamic quantities of bromide adsorption on Ag(100) on the basis of the Grahame–Parsons model of the Helmholtz layer.     

高核Ag/S纳米团簇合成的研究进展

硫醇配体保护的高核银纳米团簇具有丰富的结构和性能, 在光致发光、 生物传感、 纳米材料等方面具有广阔的应用前景. 然而, 精确控制高核Ag/S纳米团簇的尺寸和结构面临着巨大的挑战, 构建高核Ag/S纳米团簇的可行策略也一直是人们关注的焦点. 近年来, 随着合成方法和表征技术的不断发展, 高核Ag/S纳米团簇的合成和性能研究方面均取得了显著的成就. 本文总结了含20个或以上Ag原子的Ag/S纳米团簇的合成方法(直接还原法、 阴离子模板法及配体交换法), 对部分高核Ag/S纳米团簇的结构进行了探讨, 并展望了未来研究的趋势.     

N-CF3 Imidazolidin-2-one Derivatives via Photocatalytic and Silver-Catalyzed Cyclizations

While the N-trifluoromethylation of cyclic ureas is of interest for the potential to fundamentally change the properties of these biologically relevant moieties, the single synthetic procedure known to date describing their access only gives 4,4-disubstituted or fused aromatic cyclic N-CF₃ urea derivatives. We herein report an alternative approach to unleash access to the 4-monosubstituted imidazolidinone motif. The strategy relies on straightforward cyclization of readily accessible acyclic ureas, enabled by Ag-catalysis or light-assisted proton coupled electron transfer. The cyclic core is shown to be highly robust and amenable to various derivatizations, such as tandem Ni-catalysis, C−B, C−N, C−C cross couplings or C−H functionalizations, tolerating basic, nucleophilic and/or oxidizing conditions.     

Spectrophotometric and physicochemical investigations of Congo,alizarin red dyes and BSA interactions with Au,Ag and Au/Ag mix nanoparticles,and their antimicrobial activities

Individual and mix metal nanoparticles of Ag and Au have been prepared by the reducing method where citrate was used as reducing/stabilizing agent. The prepared NPs were characterized with UV/Visible and transmission electron microscopic (TEM) tools. The characteristic peak in UV/Visible at 525, 444 and 531 nm for Au, Ag and Ag/Au mix NPs respectively, gave primary confirmation of prepared NPs. TEM analysis showed the size of nanoparticles as 44.04, 19.78 and 30.93 nm for Ag, Au and Ag/Au mix NPs respectively. Congo and alizarin red dye interactions studies have been performed with prepared NPs to see the removal of the pollutants from water. Congo dye has shown weaker interaction as compared to alizarin due to structural symmetry. Amongst all, the AgNPs have shown maximum 67% and 75% interactions with Congo red and alizarin respectively due to high negative charges on the surface. The Au, Ag and Au/Ag mix NPs have shown stronger interaction with bovine serum albumin (BSA) protein up to 51, 59, 55% respectively, estimated through UV/Vis and physicochemical analysis. The biological evaluations of the prepared NPs have shown their antibacterial activity against Gram + ve and –ve species showing up to 9 cm zone of inhibition. The BSA interaction and antibacterial activity of NPs reveal the importance of NPs in medicinal field.     

Facile synthesis of silver doped-copper oxide nano materials utilizing areca catechu (AC) leaf extract and their antidiabetic and anticancer studies

The present research highlights physical significance of green combination of metal oxide nanomaterials utilizing medicinal plant which has widely analyzed in different medical applications i.e., medicinal science, therapeutics. In this paper, we discussed environmentally benign approach for synthesizing silver doped copper oxide nanoparticles (Ag–CuO NPs) utilizing (ACLE). Scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) were utilized to confirm the size, crystalline structure and surface morphology of the obtained nanomaterials. The monoclinic crystalline structure of the Ag–CuO NPs as produced was revealed by XRD patterns. Morphological analysis disclosed the nano-based spherical configuration of Ag–CuO NPs, as well as their morphology and elemental composition. The anti-diabetic effect of Ag–CuO NPs was further investigated utilizing a yeast cell model and amylase inhibition. Here, a decrease in intracellular glucose and a delay in carbohydrate digestion indicate promising antidiabetic action. Furthermore, the prepared nanomaterial showed anticancer potential against the MCF-7 cancer cell line, with an IC ₅₀ value of 11.21 g/ml.     

Facile Synthesis of Ag/Ag3PO4 Composites with Highly Efficient and Stable Photocatalytic Performance under Visible Light

The Ag/Ag₃PO₄ composites with various shapes (spheres, polyhedral, and microcubes) were synthesized by a facile precipitation method and a subsequent light‐reduction route at room temperature. The as‐prepared Ag/Ag₃PO₄ composites were characterized in detail by X‐ray diffraction, Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, scanning electron microscopy, UV–vis diffuse reflection, and photoluminescence spectroscopy. The growth processes of different morphologies Ag/Ag₃PO₄ composites are also discussed. The decomposition test of rhodamine B (RhB) indicated that the Ag/Ag₃PO₄ composites enhanced the photocatalytic performance compared with pure Ag₃PO₄, which was attributed to the surface plasmon resonance (SPR) of Ag nanoparticles and the stability of the photocatalysts. Moreover, uniform cubes of Ag/Ag₃PO₄ showed the highest photocatalytic activity and could completely degrade RhB in 7 min, which could be primarily ascribed to the cubic structure of Ag/Ag₃PO₄ with strong visible‐light absorption and efficient separation of the photo‐generated electrons and holes. Furthermore, the possible photocatalytic mechanism is also discussed.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Silver(I) complex with 2-amino-4,4α-dihydro-4α,7-dimethyl-3H-phenoxazin-3-one (Phx-1) ligand: crystal structure,vibrational spectra and biological studies

The first metal complex of Phx-1 ligand, bis(2-amino-4,4α-dihydro-4α,7-dimethyl-3H-phenoxazin-3-one)nitratosilver(I), [Ag(Phx-1)₂NO₃], has been obtained and investigated by single crystal X-ray diffraction and vibrational spectroscopy methods. The Ag⁺ is bonded to heterocyclic nitrogen atoms of two organic ligands and one oxygen atom of a nitrate anion. The Phx-1 ligand coordination mode is supported by IR and Raman spectra, interpreted with the help of theoretical DFT studies. The antibacterial activity of the ligand and its Ag(I) complex as well as some reference compounds were screened against Gram-positive and Gram-negative bacteria, applying microdilution procedures. High sensitivity to the studied complex was found for Rhodococcus erythropolis and Bacillus licheniformis strains. Modified Phx-1 ligand preparation procedures are also presented.     

Fabrication of urchin‐like Ag/ZnO hierarchical nano/microstructures based on galvanic replacement mechanism and their enhanced photocatalytic properties

Urchin‐like Ag/ZnO hierarchical nano/microstructures have been synthesized through a facile low‐temperature hydrothermal growth method based on galvanic replacement mechanism. The experimental results show that the urchin‐like Ag/ZnO heterostructures are formed through the epitaxial growth of ZnO nanorods on the {111} facets of Ag nanoparticles along their own c‐axis. The photocatalytic properties of the products were evaluated by the degradation of RhB dye solution under ultraviolet irradiation, and the results show that the products exhibit significantly enhanced photocatalytic properties comparing with pure ZnO nanorods. The products with a Ag content of 35.64 atom % prepared with a Ag⁺ concentration in solution of 5 mM exhibit surprisingly high degradation rate (99.5%) for RhB dye solution (4 mg/L) after photocatalytic reaction for only 14 min under ultraviolet irradiation. The Schottky barrier formed at the metal‐semiconductor interfaces improves the segregation of charges and prevents the charge recombination, and thus significantly enhances the photocatalytic activities of the products. On the other hand, the high stability of the urchin‐like Ag/ZnO hierarchical nano/microstructures can effectively prevent the aggregation of nanostructures with simultaneously preserving high photocatalytic properties due to the existence of nanosized unites. Copyright © 2016 John Wiley & Sons, Ltd.