负压爆炸载荷和数据采集间隔对弹性开孔板动应力集中的影响

基于ANSYS 7.0/LS-DYNA程序,对3 m3 m四边简支,厚度0.025 m,中心开有0.3 m0.3 m方孔的弹性板,在正压和负压三角爆炸载荷作用下的应力响应进行了分析,利用能量密度时间分布函数（TDFED）确定了动应力集中因子,并给出其计算步骤。计算结果表明计算总时间和数据采集时间间隔对动应力集中因子影响较大,而负压荷载影响较小。     

FLOW STRUCTURE FORMATION AND EVOLUTION IN CIRCULATING GAS-FLUIDIZED BEDS

The occurrence of heterogeneous flow structures in gas-particle flows seriously affects the gas-solid contacting and transport processes in high-velocity gas-fluidized beds. Particles do not disperse uniformly in the flow but pass through the bed in a swarm of clusters. The so-called “core-annulus“ structure in the radial direction and “S“ shaped axial distribution of solids concentration characterize the typical flow structure in the system. A computational study, using the discrete particle approach based on molecular dynamics techniques, has been carried out to explore the mechanisms underlying formation of the clusters and the core-annulus structure. Based on energybudget analysis including work done by the drag force, kinetic energy, rotational energy, potential energy, and energy dissipation due to particle-particle and particle-wall collisions, the role of gas-solid interaction and inelastic collisions between the particles are elucidated. It is concluded that the competition between gas-solid interaction and particle-particle interaction determines the pattern formation in high-velocity gas-solid flows: if the gas-solid interaction (under elevated pressure) dominates, most of particle energy obtained by drag from the gas phase is partitioned such that particle potential energy is raised, leading to a uniform flow structure. Otherwise, a heterogeneous pattern exists, which could be induced by both particle -particle collisions and gas-solid interaction. Although both factors could cause the flow instability, the non-linear drag force is demonstrated to be the necessary condition to trigger heterogeneous flow structure formation. As gas velocity increases and goes beyond a critical value, the fluid-particle interaction suppresses particle collisional dissipation, and as a consequence a more homogeneous flow regime is formed.     

基于高阶位移模式的压电层合板动力有限元模型

建立了含压电片层合板的有限元动力学模型。以位于压电层上下表面处的电场强度和层间电压为未知量,给出了三次函数的电势分布模式,采用Reddy的高阶剪切理论描述板的位移场,假设板厚度方向的正应力为零给出了减缩的本构方程,采用有限元方法,基于Hamilton原理导出结构的动力学方程,然后用静态缩聚的方法压缩掉电场自由度和次要的位移自由度。最后用四边形矩形单元求解了一对称铺层和非对称铺层悬臂板的固有频率,并与ANSYS结果对比验证了本文模型的精确性。     

孔底空腔爆炸应力场分布的动光弹试验研究

在保护层开挖中,孔底空腔装药爆破的方法被证明对保护建基面是行之有效的。为了研究炮孔孔底空腔装药结构的爆炸作用机理,运用动光弹试验模拟介质受到爆炸载荷作用下的动态响应,分析了不同装药结构的孔底应力场分布情况及其作用规律;文中介绍了动光弹模型试验设计参数,通过对试验中条纹级数与比例距离曲线的对比分析,得出了合理的孔底空腔能有效地降低爆炸峰值压力和有利于保护建基面的结论。     

圆形刚性夹杂双周期分布的反平面问题

研究含双周期分布的圆形刚性夹杂在无穷远受纵向剪切的弹性平面问题，遵循复合材料中各夹杂相互影响的重要条件。采用复变函数方法。构造相应模型的复应力函数。通过坐标变换，同时满足夹杂边界位移条件，再利用围线积分将求争方程组化为线性代数方程组。导出了圆形刚性夹杂双周期分布的界面应力解析表达式。算例给出了界面应力最大值与夹杂间距的变化规律。求出了刚性夹杂的合理间距问题，本文发展的分析方法为研究夹杂材料的细观机理探索了一条有效的分析途径。     

建筑风压场数值模拟中压力波动的平抑

在以同位网格为基础的简单流场压力计算中,通常采用动量插值方法来平抑流场中的压力波动现象;但是对于建筑风场等复杂的钝体绕流问题,由该平抑方法得到的收敛风压场仍可能存在小幅波动。为彻底解决同位网格格式下的压力波动,除采用动量插值方法外,本文提出了在压力校正方程的界面流速中添加压力梯度差值项的方法。算例分析表明,该方法计算得到的建筑风压场完全避免了压力波动现象,风压解与试验结果吻合良好。     

损伤体有效弹性性质的细观分析和不变性描述—— 一个考虑微缺陷相互作用的一般理论模式

通过引进微缺陷相互作用张量，建立了一个二维情况下考虑微缺陷（微裂纹或微孔洞）间相互作用的损伤固体有效弹性性质的一般理论模式模型中考虑了微缺陷的几何形状、取向分布和空间分布所造成的有效柔度张量的各向异性和材料中微缺陷之间的相互作用所引起的损伤柔度张量的高阶效应针对微椭圆孔、微圆孔和微裂纹问题，求得了相互作用张量的解析形式     

吊车压轨器强度的实验测试

宽厚板厂房的行车轨道在行车运行时承受来自行车水平导向轮的水平推力，该水平推力可能导致压轨器破坏，为确保压轨器的安全设计，采用平面光弹性、三维光弹性进行实验测试，分析在最不利工况下，各种压轨器所承担的水平推力份额，压轨器的变形和应力分布，给出强度分析评估，确定系统中各个压轨器以及固定螺栓的关键部位的应力水平。     

三峡库区滑坡的时空分布特征与成因探讨

三峡库区地质灾害频繁发生,地质历史上大型滑坡广泛发育。近年库区滑坡灾害有逐年增加趋势。这些滑坡形成的堆积体成因复杂,不能单纯从传统的外动力或内动力作用来解释,给库区灾害的防治工程带来了很大困难。三峡库区大型古滑坡主要沿长江干流和支流的深切河谷两岸分布,与河流发育演化史密切相关。15万年以来,长江三峡地区经历了新构造期以来抬升速率最快的一次构造幕,山原期夷平面上升了100m,河流强烈下切,形成高陡岸坡,卸荷效应显著;同时,该时期三峡地区的气候受到青藏高原环境变化的影响,在间冰期可能存在相似的暖湿古气候环境,降水极为丰富。三峡库区的大型古滑坡在新构造快速抬升时期广泛发育,并且与暖湿多雨期相对应,表明库区滑坡的发育演化是新构造运动和气候变化内外动力耦合作用的结果。     

SPATIAL AND SEASONAL DISTRIBUTIONS OF ATMOSPHERIC CARBONACEOUS AEROSOLS IN PEARL RIVER DELTA REGION, CHINA

Concentrations and spatial distributions of organic carbon (OC) and elemental carbon (EC) in atmospheric particles were measured at 8 sites in four cities (Hong Kong, Guangzhou, Shenzhen and Zhuhai) of Pearl River Delta Region (PRDR), China during 2001 winter period and 2002 summer period. PM2.5 (particie diameter smaller than 2.5 um) and PM10 (particie diameter smaller than 10 um) samples were collected on pre-fired quartz filters with mini-volume samplers and analyzed using thermal optical reflectance (TOR) method. The average PM2.5and PM10 Ievel were 60.1 and 93.1 μg·m-3, respectively, with PM2.5 constituting 65.3% of the PM10 mass. The average OC and EC concentrations in PM2.5 were 12.0 and 5.1 μg·m-3, respectively, while those in PM10 were 16.0 and 6.5 μg·m-3, respectively. The carbo-naceous aerosol accounted for 37.2% of the PM2.5 and 32.8% of the PM10. The highest concentrations of OC and EC were observed at Guangzhou city in both vvinter and summer seasons. The average OC/EC ratios were 2.