I~-的光电化学氧化与光助充电二次锂离子电池

采用扫描电子显微镜、X射线衍射和粉末微电极分别考察了TiO2粉末的形貌、结构以及氧化I-的光电化学行为.结果表明,TiO2粉末晶型为锐钛矿,粒径在100～200 nm范围内.在光照条件下,在TiO2半导体电极上电化学氧化I-生成I2的超电势数值降低约1 V.以TiO2/ITO和Li4Ti5O12分别作为正负极,电解液为碳酸丙烯酯(PC)+LiClO4+LiI,并以聚偏氟乙烯(PVDF)作为隔膜构成分隔式电解池,进行整体电解并结合紫外-可见光谱进行分析.结果表明,该装置在光照条件下电池充电电压比非光照条件下的充电电压降低约0.9 V,且充电效率接近100%.该光电化学装置是一种可以利用光能充电的二次锂离子电池.     

Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。     

辅合金的粉末尺寸对烧结钕铁硼磁性能和微结构的影响

双合金法是降低烧结钕铁硼稀土特别是重稀土含量、改善磁体微结构的一种有效方法,其中辅合金的成分及形态起着至关重要的作用。采用粉末冶金的方法,借助SEM和直流磁特性测量系统对辅合金和磁体的微观结构及磁性能进行了分析。结果表明:辅合金粉末尺寸较大时,往往存在大量的中间相能直接进入磁体中形成较大的软磁特性的过渡相,从而损害磁体的磁性能。相反,辅合金粉末尺寸越小,中间相在烧结过程中元素不需要长距离的扩散而达到稳定状态,有利于优化微结构,提高磁体的磁性能。     

制样方法对固体粉末X射线光电子能谱测试结果的影响

为了得到准确且分辨率高的X射线光电子能谱(XPS)数据,采用不同制样方法对不同类型的导电、不导电和混合粉末的测试结果进行了研究. 从图谱半峰宽、是否有荷电、真实性、制样效率和数据处理等方面阐述不同制样方法对测试结果的影响. 试验结果表明,对于导电和不导电粉末,粘取制样略优于铟片制样,其中使用碳导电胶带制样效果更好. 对于混合样品,Scotch双面胶带粘样后的测试结果优于其他3种制样方式. 此外,铟片制样可作为数据处理时荷电校正的参考方法.     

Iso-structural phase transition in tetramethylammonium nickel（Ⅱ） nitrite [（CH3）4N][Ni（NO2）3]

The title compound, tetramethylammonium nickel nitrite [（CH3）4N][Ni（NO2）3], has a hexagonal perovskite-type structure with formula ABX3. It undergoes two reversible phase transitions occurring at about 409.1 and 428.4 K, associated with dielectric transitions. DSC measurement and dielectric measurement confirm the transition. The variable-temperature X-ray structural determinations and the powder X-ray diffraction （PXRD） experiments reveal that this compound has the same space group P3ml （No. 164） at 293 K, 413 K and 438 K. The phase transitions are caused by the rotation of the [（CH3）4N]＋ cation.     

Alkali metal cation doping of metal-organic framework for enhancing carbon dioxide adsorption capacity

Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.     

Syntheses,Structures, and Luminescent Properties of Two Zn~Ⅱ-organic Polymers Based on [Zn(ox)]_n Chains and Different Imidazole Linkers

Hydrothermal reactions of two imidazole derivatives(1,3,5-tib = 1,3,5-tris(1Himidazol-1-yl)benzene, 1,4-bimb = 1,4-bis(1H-imidazol-1-ylmethyl)benzene) and the ZnⅡ cations in the presence of oxalic acid(H2ox) afford two coordination polymers, namely, {[Zn(ox)(1,3,5-tib)]·2(H2O)}n(1) and [Zn1.5(ox)1.5(1,4-bimb)1.5]n(2). Their structures have been determined by single-crystal X-ray diffraction analyses, elemental analyses, IR spectra, and powder X-ray diffraction(PXRD) analyses. Both complexes 1 and 2 are based on the 1D zigzag [Zn(ox)]n chains, and their final structures are controlled by the two different imidazole linkers, which expanded the structure along different directions, finally giving a 3D dia net for 1 and a 2D sql layer for 2. Moreover, the luminescent properties of 1 and 2 have been investigated.     

A New Terbium（III） Coordination Compound with 2-Thiophenecarboxylic Ligand： Synthesis and Crystal Structure①

A new coordination compound with formula [Tb（2-TC）3（DMF）]n （1, 2-TC = 2-thio- phenecarboxylic ligand and DMF = dimethylformamide） was synthesized by solvothermal method. The structure of compound 1 was determined by single-crystal X-ray diffraction analyses, and characterized by elemental analyses, IR and powder X-ray diffraction. Structure analysis reveals compound 1, exhibiting a one-dimensional chain structure, crystallizes in triclinic space group P21/c, with a = 9.2751（19）, b = 16.490（3）, c = 15.865（5） A, β = 118.98（2）°, V= 2122.7（9）A3, D,. = 1.916 g/cm3, Mr= 612.45 （C18H15NO7S3Tb）, F（000） = 1196,μ（MoKa） = 3.67 mm-1, Z = 4, R = 0.0616 and wR = 0.0962 for 3865 observed reflections （I 〉 2o（I））, and R = 0.1092 for all data. Meanwhile, the photoluminescent properties of compound 1 were also investigated in the solid state at room temperature.     

Synthesis and Crystal Structure of a New Pr(Ⅲ)–K(Ⅰ) Heterometallic Oxalate Coordination Polymer

A new 3D heterometallic coordination polymer, namely [K2Pr2(C2O4)4·H2O]n(1), has been successfully synthesized under hydrothermal conditions. X-ray single-crystal diffraction determination reveals that 1 crystallizes in monoclinic system, space group P21/n with a = 12.060(4), b = 8.493(3), c = 15.776(5)(A), β = 93.235(3)°, V = 1613.4(9) 3, Z = 4, Mr = 730.12, Dc = 3.006 Mg/m3, μ = 6.581 mm-1, F(000) = 1368, the final R = 0.0283 and w R = 0.0866 for 2939 observed reflections with I 2σ(I). Complex 1 features an unusual 3D heterometallic coordination framework, in which oxalates exhibit three different coordination behaviours. Moreover, powder X-ray diffraction and thermal properties for 1 have also been investigated.     

Hydrothermal Synthesis and Structural Characterization of a Novel 3-D Open Framework Zinc Phosphate Microporous Compound(C_5N_2H_(14))·[Zn_3(OH_2)(PO_4)_2(HPO_4)]

One novel organically templated zincophophate(C5N2H14)·[Zn3(OH2)(PO4)2(HPO4)] has been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction together with elemental analysis, infrared spectroscopy, thermogravimetric analysis, and powder X-ray diffraction. The title compound crystallizes in the monoclinic space group P21/n, with a = 9.7904(11), b = 14.0287(14), c = 11.8651(13) , β = 104.690(3), V = 1576.4(3) 3, Z = 4, T = 296(2) K, Mr = 601.31 and Dc = 2.533 g/cm3. The compound consists of a macroanionic [Zn3(OH2)(PO4)2(HPO4)]2- framework and(C5N2H14)2+ cations, and its structure is built up from ZnO3(OH2), ZnO4, HPO4 and PO4 tetrahedral units that result in 4, 8 and 10-ring channels.