X射线衍射研究N2+注入Si

本文首先给出了180keV的N₂⁺注入Si的X射线衍射(XRD)分布,然后用Levenberg-Marquardt最优化方法模拟实验曲线。根据XRD运动学理论,在我们给出的试探胁变函数和多层模型的基础上,用自编程序计算给出了晶格胁变随注入深度、剂量和退火温度的变化。最后我们对实验和计算结果进行了初步的分析讨论。 关键词：     

Orlicz-Sobolev空间的中点局部一致凸性

本文研究了Orlicz-Sobolev空间的中点局部一致凸性，通过结合Orlicz空间和Sobolev空间的技巧得到分别赋Luxemburg范数和赋Orlicz范数的Orlicz-Sobolev空间具有中点局部一致凸性的充要条件．     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .     

2-乙酰氨基-3,4,6-三乙酰葡萄糖的合成

细菌内毒素(ＬＰＳ)是革兰氏阳性阴性菌细胞外膜层的主要成分,由其引起的革兰氏阴性杆菌脓度症和休克是导致战创伤病人死亡的主要原因之一。而从类脂Ａ(ＬｉｐｉｄＡ)的结构出发,以非肽类物质拮抗内毒素受体ＣＤ-14为治疗手段的研究在国外刚刚起步。2-乙酰氨基-3,4,6-三乙酰葡萄糖是合成ＬｉｐｉｄＡ结构类似物的重要中间体[1,2]。它的合成一般是通过氨基葡萄糖五乙酸酯的选择性水解[3-6]脱去一个乙酰基得到。氨基葡萄糖五乙酸酯是通过氨基葡萄糖的乙酰化反应得到的,由于氨基葡萄糖不稳定,一般是用氨基葡萄糖的盐酸盐作为起始原料。由于…     

HL-2A装置硅化对杂质线辐射的影响

在2004年的实验中，首次在HL-2A偏滤器装置上进行了硅化器壁处理，在这种硅化器壁的条件下，对轻重杂质的线辐射进行了研究，并与无硅化条件下的杂质特性作了比较。在实验中，通过观测杂质的辐射特性研究了硅化对杂质的吸附作用和硅化效果的维持。并通过调整硅化后的辉光放电清洗，研究了硅化对氢再循环的影响。     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.