基于拓扑描述函数的特定性能复合材料设计

提出了一种基于拓扑描述函数进行特定性能复合材料设计的新方法. 采用拓扑描 述函数作为设计变量，把复合材料微结构的设计问题转化为一个在周期性单胞上的拓扑优 化问题. 拓扑描述函数以及相应正则化机制的引入不仅可以有效消除棋盘格式等数值不稳定 现象，而且能够有效地抑制传统算法处理此类优化问题时所引发的边界扩散效应. 数值结果 表明所提出的方法可以稳定高效地实现具有特定性能的复合材料微结构设计.     

多工况下杆系结构拓扑型优化设计

 给出了一种用于杆系结构的拓扑型结构综合算法. 该算法由拓扑 级和形状级两部分组成，并用修正Goldfarb法进行求解. 本文提出的 修正Goldfarb法是根据杆系结构特点吸取文[1]的松弛方法在共轭梯度 法基础上给出的，通过对结构优化算例的计算，说明该方法效果较好.     

CONTINUUM TOPOLOGY OPTIMIZATION FOR MONOLITHIC COMPLIANT MECHANISMS OF MICRO-ACTUATORS

A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes (MMA), is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.     

Independent continuous mapping for topological optimization of frame structures

Based on the Independent Continuous Mapping method (ICM), a topological optimization model with continuous topological variables is built by introducing three filter functions for element weight, element allowable stress and element stiffness, which transform the 0-1 type discrete topological variables into continuous topological variables between 0 and 1. Two methods for the filter functions are adopted to avoid the structural singularity and recover falsely deleted elements: the weak material element method and the tiny section element method. Three criteria (no structural singularity, no violated constraints and no change of structural weight) are introduced to judge iteration convergence. These criteria allow finding an appropriate threshold by adjusting a discount factor in the iteration procedure. To improve the efficiency, the original optimization model is transformed into a dual problem according to the dual theory and solved in its dual space. By using MSC/Nastran as the structural solver and MSC/Patran as the developing platform, a topological optimization software of frame structures is accomplished. Numerical examples show that the ICM method is very efficient for the topological optimization of frame structures.The project supported by the National Natural Science Foundation of China (10472003) and Beijing Natural Science Foundation (3042002) The English text was polished by Yunming Chen.     

类升力体外形高超声速粘性绕流拓扑结构分析

采用交替方向隐式分解的隐式NND格式求解全N-S方程模拟“类升力体”外形在高超声速下的大攻角流动,给出了“类升力体”外形表面极限流线随攻角变化的拓扑结构及40°攻角下垂直于体轴的横截面流线拓扑结构。结果表明:类升力体外形三维流场结构十分复杂,攻角从0°～40°变化时,背风面表面极限流线依次由不分离、开式分离向起始于鞍、结点组合的高阶奇点的分离方式转化,翼面横向分离亦随攻角增大而增大;垂直于体轴的横截面流动拓扑结构与文献[2]给出的理论分析一致。     

多工况多约束下离散变量桁架结构的拓扑优化设计

提出了一个多工况下受应力、位移约束的离散变量桁架结构的拓扑优化方法，给出了结构拓扑形式变更时的约束处理方法及杆件删除策略，使基结构设计空间的维数不断降低，达到最优拓扑，避免了奇异解的出现，在算例中指出了截面离散集和位移约束对最优拓扑的影响；算例给出了满意的拓扑优化解。     

可聚合添加剂和极压添加剂对矿物油极压抗磨和抗疲劳性能的影响

选用重极压齿轮油和二聚酸 /司本 - 80添加剂制备了多种不同配比的油样 ,进行了疲劳和胶合试验 ,同时分析了磨损表面形貌和抗磨机理 .结果表明 :聚合添加剂的耐疲劳性能较好 ,其与极压添加剂经合理复配可以更好地提高油样的耐疲劳及抗胶合综合性能 .这是两类添加剂协同作用的结果     

考虑设计规范的海洋平台结构选型优化

针对具体海洋环境条件和生产要求，对导管架平台结构进行选型优化——拓扑布局与构件尺寸的联合优化，充分考虑设计规范的要求，建立多设计准则、多约束条件和多荷载工况的设计模型，其中环境荷载包括：风、浪、流、海冰从不同方向对平台的作用。通过结构选型优化获得最佳的结构拓扑布局形式，在降低平台造价的同时，设计出满足结构的稳定特性、安全寿命等多种设计准则的新型平台结构。     

包含两类变量的离散变量桁架结构拓扑优化设计

建立了包含截面和拓扑两类变量的离散变量结构拓扑优化设计的数学模型,该模型考虑了截面变量与拓扑变量间的耦合关系,反映了拓扑优化问题的组合优化本质,可以较好地解决"极限应力"、"最优解的奇异性"等困扰结构拓外优化设计的问题．同时采用相对差商法进行离散变量桁架结构拓扑优化,直接求解包含两类变量的离散变量结构拓扑优化设计数学模型,收到了比较满意的效果．