Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

Leakage currents in ferroelectric thin films

The main mechanisms of leakage currents in thin lead zirconate titanate (PZT) ferroelectric films prepared by the sol–gel method are discussed. Four specific regions are determined in I–V dependencies. At very weak fields (10–20 kV/cm), the current falls with the voltage increase as a result of depolarization. In the low fields region (about 70–100 kV/cm), the leakage current decreases with the decrease of voltage ramp speed and its components are the ohmic and displacement currents. In the high fields region (≥130 kV/cm), the leakage current increases with the decrease of step voltage ramp in contrast to the previous case. Possible conductivity mechanisms are the Poole– Frenkel emission and hopping conduction. In the transition region between above-mentioned ones (from 80–90 to ～130 kV/cm), an abrupt unstable increase of current is observed caused by breakdown of reverse bias Schottky barrier. Depolarization currents are studied for sol–gel PZT films prepared at different preparation conditions.     

Preparation and characterization of vinyltriethoxysilane based inorganic–organic gel glasses dispersed 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal

Vinyltriethoxysilane based inorganic–organic glasses dispersed with 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal are designed to fabricate a new type of gel glass dispersed with liquid crystal. Scanning electron microscopy shows that the nematic liquid crystal phase, occupying the interconnected cavities, is continuously embedded in the inorganic–organic matrixes. The effect of the nematic liquid crystal weight concentration on the morphology is investigated. The differential scanning calorimetry shows that the nematic-isotropic transition temperature depends on the nematic liquid crystal weight concentration. The Raman spectra show that there are no obvious Raman frequency shifts, compared with pure nematic liquid crystal. The in situ diffuse reflectance FTIR spectra show that the integral intensity of bands of hydroxyls has not varied.     

Effects of Er3+ doping concentration and calcination on fluorescence properties of La3Ga5.5Nb0.5O14 nanocrystals

The effects of Er³⁺ doping concentration and calcination were examined on the fluorescence properties of La₃Ga_5.5Nb_0.5O₁₄ (Er:LGN) nanoparticles for the first time. High quality Er:LGN nanoparticles were synthesized by sol‐gel method. The room temperature fluorescence spectra showed a green emission, which can be attributed to ²H_11/2‐⁴I_15/2 and ⁴S_3/2‐⁴I_15/2 transition. The relationship between the relative emission intensity and the doping concentration was investigated. The maximum of the Er³⁺ doping concentration in LGN nanopowders is 2.0%. The fluorescent lifetime of 2.0% Er:LGN nanoparticles is 1.45ns. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile synthesis of polyacrylate directed silver nanoparticles for pH sensing through naked eye

Poly(acrylic acid) (PAA) and its salt poly(acrylate) (PA) have been synthesized through modified free radical polymerization in environmentally begin aqueous medium under ultrasound to make the process robust. The synthesized polymer is well-characterized through conventional techniques. Its salt is employed to produce highly stable and stimuli sensitive colloidal silver (Ag-PA sol) without using any additional reducing chemical reagents like sodium borohydride, ascorbic acid, hydrazine, etc or UV/Gamma radiation. A detailed mechanistic path of the polymerization and reduction of Ag⁺ on polyacrylate chains has been evaluated. Finally Ag-PA sol is used for pH sensing through naked eye to eliminate the need for sophisticated instrument for data collection. The present work focuses mainly the development of a low cost pH sensing system based on colorimetric ‘smart polymer’ having high practical utility. The unique structural and photo-physical features of nano-scaled materials open new opportunities for the applications of colorimetric pH sensor. In the present work, Ag nano-clusters capped by PA^? are employed as an effective colorimetric pH sensor for the first time, requiring no further functionalization.     

Preparation of a novel bentonite intercalation composite by changing the chemical state of aluminum

A new environment-friendly bentonite intercalation composite was successfully obtained from alumina sol intercalation. This process used industrial grade pseudo boehmite as the aluminum source and provided with the advantage of zero emission of acidic wastewater. The bentonite intercalation composite was investigated by XRF, ICP, XRD, FT-IR, BET, and pyridine-FTIR. Results indicated that the basal spacing was enlarged from 14.72 to 15.60 Å; the specific surface area increased by 128%; and the total acid content increased from 65.32 to 245.76 μmol/g. The catalytic activity of this composite was tested by alkylation of aromatics with olefins. The results show that the weak Lewis acid generated by extra-framework aluminum and specific surface area play a decisive role, while weak Brønsted acid site is not the active site for this alkylation reaction.     

Organic–inorganic bonding in chitosan–silica hybrid networks: Physical properties

Novel biomaterials are needed for bone tissue repair with improved mechanical performance compared to classical bioceramics. The objective of this work was to characterize a hybrid filler material, which is capable to coat as a thin film porous scaffolds improving their mechanical properties for bone tissue engineering. The hybrid filler material is a blend of chitosan and silica network formed through in situ sol–gel using tetraethylortosilicate and 3‐glycidoxypropyltrimethoxysilane (GPTMS) as silica precursors. The hypothesis was that the epoxy ring of GPTMS could react with the amino groups of chitosan in acidic media while it is also reacting the siloxane groups of hydrolyzed silica precursors. The formation of the hybrid organic–inorganic network was assessed by different physical techniques revealing changes in molecular mobility and hydrophilicity upon chemical reaction. Finally, the cytotoxicity of the samples was also evaluated by MTT assay. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1391–1400     

Acetic Anhydride as an Oxygen Donor in the Non-Hydrolytic Sol–Gel Synthesis of Mesoporous TiO2 with High Electrochemical Lithium Storage Performances

An original, halide-free non-hydrolytic sol–gel route to mesoporous anatase TiO₂ with hierarchical porosity and high specific surface area is reported. This route is based on the reaction at 200 °C of titanium(IV) isopropoxide with acetic anhydride, in the absence of a catalyst or solvent. NMR spectroscopic studies indicate that this method provides an efficient, truly non-hydrolytic and aprotic route to TiO₂. Formation of the oxide involves successive acetoxylation and condensation reactions, both with ester elimination. The resulting TiO₂ materials were nanocrystalline, even before calcination. Small (about 10 nm) anatase nanocrystals spontaneously aggregated to form mesoporous micron-sized particles with high specific surface area (240 m² g⁻¹ before calcination). Evaluation of the lithium storage performances shows a high reversible specific capacity, particularly for the non-calcined sample with the highest specific surface area favouring pseudo-capacitive storage: 253 mAh g⁻¹ at 0.1 C and 218 mAh g⁻¹ at 1 C (C=336 mA g⁻¹). This sample also shows good cyclability (92 % retention after 200 cycles at 336 mA g⁻¹) with a high coulombic efficiency (99.8 %). Synthesis in the presence of a solvent (toluene or squalane) offers the possibility to tune the morphology and texture of the TiO₂ nanomaterials.     

Freeze–Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble-metal aerogels (NMAs) have drawn increasing attention because of their self-supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self-healing properties of noble-metal aggregates, the freezing-promoted salting-out behavior, and the ice-templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble-metal gels within one day without extra additives. In light of their cleanliness, the multi-scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble-metal catalysts.     

Bioactive glass sol as a dual function additive for chitosan-alginate hybrid scaffold

Bioactive glass-chitosan-alginate hybrid scaffolds were fabricated using BG sol as a dual function additive, which behaves as both bioactive inorganic phase to confer the bioactivity and cross-linker to improve the structural stability and mechanical properties.