Optimization of multiwalled carbon nanotubes reinforced hollow‐fiber solid–liquid‐phase microextraction for the determination of polycyclic aromatic hydrocarbons in environmental water samples using experimental design

A novel design of hollow‐fiber liquid‐phase microextraction containing multiwalled carbon nanotubes as a solid sorbent, which is immobilized in the pore and lumen of hollow fiber by the sol–gel technique, was developed for the pre‐concentration and determination of polycyclic aromatic hydrocarbons in environmental water samples. The proposed method utilized both solid‐ and liquid‐phase microextraction media. Parameters that affect the extraction of polycyclic aromatic hydrocarbons were optimized in two successive steps as follows. Firstly, a methodology based on a quarter factorial design was used to choose the significant variables. Then, these significant factors were optimized utilizing central composite design. Under the optimized condition (extraction time = 25 min, amount of multiwalled carbon nanotubes = 78 mg, sample volume = 8 mL, and desorption time = 5 min), the calibration curves showed high linearity (R ² = 0.99) in the range of 0.01–500 ng/mL and the limits of detection were in the range of 0.007–1.47 ng/mL. The obtained extraction recoveries for 10 ng/mL of polycyclic aromatic hydrocarbons standard solution were in the range of 85–92%. Replicating the experiment under these conditions five times gave relative standard deviations lower than 6%. Finally, the method was successfully applied for pre‐concentration and determination of polycyclic aromatic hydrocarbons in environmental water samples.     

Fe3O4/polyethylene glycol nanocomposite as a solid‐phase microextraction fiber coating for the determination of some volatile organic compounds in water

A high‐performance metal oxide polymer magnetite/polyethylene glycol nanocomposite was prepared and coated in situ on the surface of the optical fiber by sol–gel technology. The magnetite nanoparticles as nanofillers were synthesized by a coprecipitation method and bonded with polyethylene glycol as a polymer. The chemically bonded coating was evaluated for the headspace solid–phase microextraction of some environmentally important volatile organic compounds from aqueous samples in combination with gas chromatography and mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The mass ratio of nanofiller and polymer on the coating extraction efficiency, morphology, and stability were investigated. The parameters affecting the extraction efficiency, including the extraction time and temperature, the ionic strength, desorption temperature, and time were optimized. The sol–gelized fiber showed excellent chemical stability and longer lifespan. It also exhibited high extraction efficiency compared to the two types of commercial fibers. For volatile organic compounds analysis, the new fiber showed low detection limits (0.008–0.063 ng/L) and wide linearity (0.001–450 × 10⁴ ng/L) under the optimized conditions. The repeatability (interday and intraday) and reproducibility were 4.13–10.08 and 5.98–11.61%, and 7.35–14.79%, respectively (n = 5). For real sample analysis, three types of water samples (ground, surface, and tap water) were studied.     

Microstructure analysis of sol‐gel‐derived nanocrystalline ITO thin films

The technique for ITO (Tin‐doped indium oxide) thin films by sol‐gel process is presented in this paper. After annealing at 500° for 15 min, ITO gel films get transformed into nanocrystallined indium tin oxide films. We studied the microstructure of ITO thin film which is closely related to optical and electrical properties. The microstructure of ITO thin film can be observed through high‐resolution transmission electronic spectroscopy (HRTEM) and the Fast Fourier Transform (FFT) technique. The film is nanocrystallite with grain sizes about 20 nm. Also, the surface chemical components were studied by XPS spectra. The transmission and the resistivity of ITO films is 97.0% and 3.5 × 10^?3 Ω?cm, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

非离子乳化剂细乳液聚合制备草莓型PSt/SiO2纳米复合微球

通过细乳液聚合,使用非离子乳化体系辛基酚聚氧乙烯醚(CA-897),在纳米二氧化硅水分散介质中,以1-乙烯基咪唑(1-VID)作为辅助单体制备了苯乙烯为核,纳米二氧化硅为壳的草莓型PSt/SiO2有机-无机复合微球.实验范围内得到的复合微球的平均粒径和最终SiO2含量分别介于140～180 nm和19 wt%-31wt...     

UV‐Irradiation Cured Organic‐inorganic Hybrid Nanocomposite Initiated by Ethoxysilane‐modified Multifunctional Polymeric Photoinitiator through Sol‐gel Process

The UV‐cured organic‐inorganic hybrid nanocomposite (nano‐Si‐m‐PI) was prepared through the photopolymerization of acrylic resin initiated by ethoxysilane‐modified multifunctional oligomeric photoinitiator (Si‐m‐PI). The esterification reaction of 2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone (Irgacure 2959) with thioglycolic acid, and the following addition reactions with dipentaerythritol hexaacrylate and then 3‐aminopropyltriethoxysilane were carried out for preparing the Si‐m‐PI. The Si‐m‐PI exhibits the similar UV absorption and molar extinction coefficient with Irgacure 2959. The photoinitiating activity study by photo‐DSC analysis showed that the Si‐m‐PI possesses high photopolymerization rate at the peak maximum (R_p^max) and final unsaturation conversion (P^f) in the cured hybrid films. From the scanning electron microscope (SEM) observation, the SiO₂ nanoparticles dispersed uniformly in the formed nano‐Si‐m‐PI, whereas the aggregation of nanoparticals occurred in nano‐Irg, which was prepared through the photopolymerization of acrylic resin initiated by Irgacure 2959. Moreover, compared with the UV‐cured pure polymer and nano‐Irg, the nano‐Si‐m‐PI showed remarkably enhanced thermal stability and mechanical properties.     

Preparation of Helical Mesoporous Ethenylene-silica Nanofibers with Lamellar Mesopores on Their Surface

The morphologies and pore architectures of mesoporous ethenylene‐silica were controlled using cetyltrimethylammonium bromide (CTAB) as template and (S)‐β‐citronellol as a co‐structure‐directing agent under basic conditions. When the (S)‐β‐citronellol/CTAB molar ratios are in the range of 0.75–2.0, helical nanofibers were obtained. With increasing the (S)‐β‐citronellol/CTAB molar ratio, the lengths of the nanofibers increases. Lamellar mesopores were identified on the surfaces of the nanofibers prepared in the (S)‐β‐citronellol/CTAB molar ratio range of 1.5–2.0. At the (S)‐β‐citronellol/CTAB molar ratio of 2.5:1, nanoparticles with nanoflakes on the surfaces were obtained. The field emission scanning electron microscopy images taken after different reaction times indicated that the helical pitches of the nanofibers decreased with increasing the reaction time. Helical 1,4‐phenylene‐silica and methylene‐silica nanofibers were also prepared. The results indicated that the morphologies and pore architectures of the obtained organic‐inorganic hybrid silicas are also sensitive to the hybrid silica precursors. Helical ethenylene‐silica nanofibers with lamellar mesopores on their surfaces can be also prepared using the mixtures of CTAB and racemic citronellol within a narrower citronellol/CTAB molar ratio range.     

Preparation of uniform and nano‐sized NaA zeolite using silatrane and alumatrane precursors

Nano‐sized Na A zeolite was successfully synthesized via the sol–gel process and microwave techniques. The synthesis parameters, such as hydroxide ion concentration, seed amount, as well as heating time and temperature, were studied to obtain the most uniform and very small sized NaA zeolite using the composition of SiO₂:Al₂O₃:xNa₂O:410H₂O; 3 ≤ x ≤ 6. It was found that hydroxide ion concentration affects the crystal size and heating time, whereas a higher amount of seed provides smaller sized NaA zeolite. The zeolite product can be synthesized using a higher temperature for a shorter time or lower temperature for a longer time. The best conditions for synthesizing the smallest size, 0.1–0.2 µm, and the most homogeneous NaA zeolite is to use the composition of SiO₂:Al₂O₃:3Na₂O:410H₂O and 3 wt% crystal seed at 80 °C microwave heating for 6 h. The synthesized NaA zeolite was characterized using XRD and SEM. Copyright © 2006 John Wiley & Sons, Ltd.     

Changes in sol fraction during peroxide crosslinking of linear low-density polyethylenes with homogeneous distribution of short chain branching

FTIR measurements of sol fractions were carried out in order to assess side reactions during dicumyl peroxide (DCP) crosslinking of linear low density polyethylenes (LLDPEs) with homogeneous distribution of short chain branching. The changes of methyl and olefinic unsaturation concentration were measured as a function of degree of branching and DCP content. The changes of methyl and vinylidene concentration indicate that the scission probability has greater significance for the samples with initial branch content above 31 CH₃/1000 C and increases with increasing DCP concentration. The analysis of trans-vinylene concentration indicates that the probability of disproportionation also increases with increasing DCP content. The changes of methyl concentration in the sol fraction of the sample containing initially ca. 23 CH₃/1000 C with increasing DCP content could be interpreted using the dependence of crosslinking efficiency on branch content found previously for some range of branch concentration. © 1995 John Wiley & Sons, Inc.