Novel Potentiometric Sensor Based on Molecular Imprinted Polyacrylamide for the Determination of Shikimic Acid in Herbal Medicine

ABSTRACT

A novel potentiometric sensor based on a molecular imprinted polymer was developed for the determination of shikimic acid in herbal medicine. The imprinted polymer was synthesized via bulk polymerization of the functional monomer in the presence of trimethylolpropane triacrylate as the cross-linker with 2,2′-azo-bisisobutyronitrile as the initiator and shikimic acid as the template. The sensing membrane was constructed by the inclusion of imprinted polymer in the polyvinyl chloride matrix. The effect of the identity of the imprinted polymer on the potentiometric response was observed. The optimal imprinted polyacrylamide was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The performance of the imprinted membrane based sensor, including the effects of pH, response time and selectivity coefficient, was investigated. The imprinted sensor exhibited a fast near-Nernstian response in the concentration range of 1?×?10^?5 to 1?×?10^?1?mol/L with a detection limit of 9?×?10^?6?mol/L. The analytical performance of the sensor supported the direct determination of shikimic acid in herbs, and the obtained results were validated by ultraviolet-visible absorption spectrophotometry. Advantages of the potentiometric sensor include enhanced sensitivity, high selectivity, long-term stability and low-cost fabrication, suggesting the device offers promise for the analysis of Chinese herbal medicine.     

Dual-target sensors: the effect of the encapsulation route on pH measurements and ammonia monitoring

Six different sensors were prepared using hydrolytic and non-hydrolytic sol–gel routes and three different pH indicators as receptor elements. These materials were employed as dual-target sensors for ammonia gas sensing and pH measurements in real samples. Ultraviolet–visible diffuse reflectance spectroscopy and a colorimetric analysis were used to evaluate the pH transitions and the color change that resulted from the ammonia that was employed as a probe for gas sensing. The colorimetric analysis was performed using the CIELAB color space model with the D65 standard illuminant. The resulting $ \Updelta {\text{E}}_{\text{ab}}^{*} $ values correlated with the response time for the observation of the first visible color change detected by the human eye (N = 50), and the average time values ranged from 48 to 117 s. In addition, the response times were evaluated as a function of sample characteristics, namely, the gender, age and eye color. Only groups of these characteristics exhibited relevance to the response time and could be associated with a specific range of time. The sensors were also employed for pH measurements of an aqueous solution, and a double-color scale could be established both with the sensors synthesized by the acid route and with the pH indicators alizarin red and brilliant yellow. From this color scale, it was possible to identify a shift in the turning point of the pH indicator from the free molecule to the encapsulated molecule. The double-color scale was applied to evaluate real samples from a galvanic industry using the synthesized encapsulated sensors.     

Molecularly imprinted conducting polymer based electrochemical sensor for detection of atrazine

An original electrochemical sensor based on molecularly imprinted conducting polymer (MICP) is developed, which enables the recognition of a small pesticide target molecule, atrazine. The conjugated MICP, poly(3,4-ethylenedioxythiophene-co-thiophene-acetic acid), has been electrochemically synthesized onto a platinum electrode following two steps: (i) polymerization of comonomers in the presence of atrazine, already associated to the acetic acid substituent through hydrogen bonding, and (ii) removal of atrazine from the resulting polymer, which leaves the acetic acid substituents open for association with atrazine. The obtained sensing MICP is highly specific towards newly added atrazine and the recognition can be quantitatively analyzed by the variation of the cyclic voltammogram of MICP. The developed sensor shows remarkable properties: selectivity towards triazinic family, large range of detection (10⁻⁹ mol L⁻¹ to 1.5 × 10⁻² mol L⁻¹ in atrazine) and low detection threshold (10⁻⁷ mol L⁻¹).     

Polymer‐based colorimetric and “turn off” fluorescence sensor incorporating benzo[2,1,3]thiadiazole moiety for Hg2+ Detection

A conjugated polymer was synthesized by the polymerization of 4,7‐dibromobenzo[2,1,3]thiadiazole ( M‐1 ) with tri{1,4‐diethynyl‐2,5‐bis(2‐(2‐methoxyethoxy)‐ethoxy)}‐benzene ( M‐2 ) via Pd‐catalyzed Sonogashira reaction. The polymer shows strong orange fluorescence. The responsive optical properties of the polymer on various metal ions were investigated through photoluminescence and UV–vis absorption measurements. The polymer displays highly sensitive and selective on‐off Hg²⁺ fluorescence quenching property in tetrahydrofuran solution in comparison with the other cations including Mg²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, and Pb²⁺. More importantly, the fluorescent color of the polymer sensor disappears after addition of Hg²⁺, which could be easily detected by naked eyes. The results indicate that this kind of polymer sensor incorporating benzo[2,1,3]thiadiazole moiety as a ligand can be used as a novel colorimetric and fluorometric sensor for Hg²⁺ detection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

π-Conjugated Copper Phthalocyanine Nanoparticles as Highly Sensitive Sensor for Colorimetric Detection of Biomarkers

Though numerous nanomaterials with enzyme-like activities have been utilized as probes and sensors for detecting biological molecules, it is still challenging to construct highly sensitive detectors for biomarkers using polymeric materials. Benefiting from the π-d delocalization effect of electrons, excellent metal-chelating property, high electron transferability, and good chemical stability of π-conjugated phthalocyanine, the design of the copper phthalocyanine-based conjugated polymer nanoparticles (Cu-PcCP NPs) as a colorimetric sensor for a variety of biomarkers is reported. The Cu-PcCP NPs are synthesized through a simple microwave-assisted polymerization, and their chemical structures are thoroughly characterized. The colorimetric results of Cu-PcCP NPs demonstrate excellent peroxidase-like detecting activity and also great substrate selectivity than most of the reported Cu-based nanomaterials. The Cu-PcCP NPs can achieve a detection limit of 4.88 μM for the H₂O₂, 4.27 μM for the L-cysteine, and 21.10 μM for the glucose via a cascade catalytic system, which shows comparable detecting sensitivity as that of many earlier reported enzyme-like nanomaterials. Moreover, Cu-PcCP NPs present remarkable resistance to harsh conditions, including high temperature, low pH, and excessive salts. These highly specific π-conjugated copper-phthalocyanine nanoparticles not only overcome the current limitation of polymeric material-based sensors but also provide a new direction for designing next-generation enzyme-like nanomaterial-based colorimetric biosensors.     

Nitrogen‐doped Hollow Co3O4 Nanofibers for both Solid‐state pH Sensing and Improved Non‐enzymatic Glucose Sensing

Nitrogen‐doped hollow cobalt oxide nanofibers (Co₃O₄ NFs) with both glucose catalytic activity and pH sensitivity were fabricated through core‐sheath electrospinning technique, followed by calcination. The as‐developed nitrogen‐doped hollow Co₃O₄ NFs were thoroughly characterized using various techniques, and then employed to fabricate a dual electrochemical sensor for both pH sensing and glucose sensing. The pH sensitivity of the developed nitrogen‐doped hollow Co₃O₄ NFs demonstrated a Nernst constant of 12.9–15.9 mV/pH in the pH range of 3.0～9.0 and 6.8–10.7 mV/pH in the pH range of 9.0～13.0, respectively. The developed hollow cobalt oxides nanofibers sensor also possesses glucose sensitivity of 87.67 μA mM^?1 cm^?2, the limit of detection of 0.38 μM (S/N=3), and an acceptable selectivity against several common interferents in non‐enzymatic glucose determination. High accuracy for monitoring glucose in human serum sample was also demonstrated. These features indicate that the as‐synthesized nitrogen‐doped hollow cobalt oxides nanofibers hold great potential in the development of a unique dual sensor for both solid‐state pH sensing and superior non‐enzymatic glucose sensing.     

A Water-Gated Organic Thin-Film Transistor for Glyphosate Detection: A Comparative Study with Fluorescence Sensing

This work reports the design of a highly sensitive solid-state sensor device based on a water-gated organic thin-film transistor (WG-OTFT) for the selective detection of herbicide glyphosate (GlyP) in water. A competitive assay among carboxylate-functionalized polythiophene, Cu²⁺, and GlyP was employed as a sensing mechanism. Molecular recognition phenomena and electrical double layer (EDL) (at the polymer/water interface) originated from the field-effect worked cooperatively to amplify the sensitivity for GlyP. The limit of detection of WG-OTFT (0.26 ppm) was lower than that of a fluorescence sensor chip (0.95 ppm) which is the conventional sensing method. In contrast to the previously reported insulated molecular wires to block interchain interactions, molecular aggregates under the field-effect has shown to be effective for amplification of sensitivity through “intra”- and “inter”-molecular wire effects. The opposite strategy in this study could pave the way for fully utilizing the sensing properties of polymer-based solid-state sensor devices.     

Electrochemical determination of iodide by poly(3-aminophenylboronic acid) film electrode at moderately low pH ranges

A new potentiometric sensor for the determination of iodide based on poly(3-aminophenylboronic acid) (PAPBA) film electrode was constructed. Poly(3-Aminophenylboronic acid) films were synthesized electrochemically on platinum electrode by cyclic voltammetry. The effect of film thickness, pH, and preconditioning parameters on the electrode performance were examined. The analytical performance was evaluated and linear calibration graphs were obtained in the concentration range of 10⁻⁶ to 10⁻¹ M iodide ion. The limit of detection was found to be 8 × 10⁻⁷ M. The response time of the sensor was 5 s and its lifetime is about one week. To check the selectivity of the PAPBA film for iodide ion, potential interferences such as Cl⁻, Br⁻, F⁻, CN⁻, IO₃⁻, Ca²⁺, and Mg²⁺ were tested. The PAPBA electrode was also employed as a sensing platform for the determination of iodide ions in commercial table salt.     

Trimethoprim-selective electrodes with molecularly imprinted polymers acting as ionophores and potentiometric transduction on graphite solid-contact

This work proposes a new biomimetic sensor material for trimethoprim. It is prepared by means of radical polymerization, having trimethylolpropane trimethacrylate as cross-linker, benzoyl peroxide as radicalar iniciator, chloroform as porogenic solvent, and methacrylic acid and 2-vinyl pyridine as monomers. Different percentages of sensor in a range between 1 and 6% were studied. Their behavior was compared to that obtained with ion-exchanger quaternary ammonium salt (additive tetrakis(p-chlorophenyl)borate or tetraphenylborate). The effect of an anionic additive in the sensing membrane was also tested.Trimethoprim sensors with 1% of imprinted particles from methacrylic acid monomers showed the best response in terms of slope (59.7 mV/decade) and detection limit (4.01 × 10^− 7 mol/L). These electrodes displayed also a good selectivity towards nickel, manganese aluminium, ammonium, lead, potassium, sodium, iron, chromium, sulfadiazine, alanine, cysteine, tryptophan, valine and glycine. The sensors were not affected by pH changes from 2 to 6. They were successfully applied to the analysis of water from aquaculture.     

Development of an Electrochemical Sensor Based on Covalent Molecular Imprinting for Selective Determination of Bisphenol‐A

In this study, an electrochemical sensor was developed and used for selective determination of bisfenol‐A (BPA) by integrating sol‐gel technique and multi‐walled carbon nanotubes (MWCNTs) modified paste electrode. BPA bounded by covalently to isocyanatopropyl‐triethoxy silane (ICPTS) was synthesized as a new precursor (BPA‐ICPTS) and then BPA‐imprinted polymer (BPA‐IP) sol‐gel was prepared by using tetramethoxysilane (TMOS) and BPA‐ICPTS. Non‐imprinted polymer (NIP) sol‐gel was obtained by using TMOS and (3‐Aminopropyl) triethoxysilane. Both BPA‐IP and NIP sol‐gels were characterized by nitrogen adsorption‐desorption analysis, FTIR, SEM, particle size analyzer and optical microscope. Carbon paste sensor electrode was fabricated by mixing the newly synthesized BPA‐IP with MWCNTs, graphite powder and paraffin oil. The electrochemical characterization of the sensor electrode was achieved with cyclic and differential pulse voltammetric techniques. The response of the developed sensor under the most proper conditions was linear in BPA concentration range from 4.0×10⁻⁹ to 1.0×10⁻⁷ mol L⁻¹ and 5.0×10⁻⁷ to 5.0×10⁻⁵ mol L⁻¹ and the detection limit was 4.4×10⁻⁹ mol L⁻¹. The results unclosed that the proposed sensor displayed high sensitivity and selectivity, superior electrochemical performance and rapid response to BPA.     

Synthesis of new vinyl ether functionalized silica for UV-patterning

We report a new ORganically MOdified SILicates (ORMOSILs) stable sol based on vinyl ether function which can be deposited as a layer and structured by mean of UV radiation through a mask or by direct laser writing. Silica matrix is synthesized by sol–gel process and organic network is formed by photopolymerization. One of the potential applications is the fabrication of integrated optical circuits. [2-(3,4 epoxycyclohexyl ethyltrimethoxysilane)] has already used for the fabrication of such devices and to develop microstructures on an organic substrate by cationic polymerization. Obtained results show some weakness such as an important contribution of OH and aliphatic CH groups to the attenuation at 1550 nm wavelength and low conversion rate of organic polymerization involving poor mechanical properties. This work treats on the design of a new generation of hybrid materials with a very high reactivity and low amount of groups involved in the attenuation. We have chosen vinyl ether function as reactive organic part for her highest polymerization rate via cationic way. The new synthesized molecule is 4-vinylether phenyltriethoxysilane. Sol–gel kinetic reactions were monitored by liquid ²⁹Si-NMR spectroscopy. In order to obtain the highest reactive multifunctional oligomers and the lowest OH groups, hydrolysis and polycondensation reactions were followed as a function of time, temperature and pH of the water involved in the hydrolysis conditions. Finally, we show the feasibility to microstructure films deposited with this sol.     

Hydroxyethyl Starch-g-Poly-(N,N-dimethylacrylamide-co-acrylic acid): An efficient dye removing agent

Hydroxyethyl Starch-g-Poly-(N,N-dimethylacrylamide-co-acrylic acid) was synthesized by solution polymerization technique using potassium peroxydisulfate (K₂S₂O₈) as the initiator at 90 °C. The synthesized graft copolymer was characterized by FTIR, NMR (both ¹H and ¹³C) Spectroscopy, molecular weight determination by GPC, TGA/DTG and SEM analysis. Biodegradation study was carried out by enzymatic hydrolysis. The number of carboxylic acid groups incorporated into the polymer was calculated by measuring neutralization equivalent (N.E) of the graft copolymer titrimetrically. The synthesized graft copolymer was used as the adsorbent for the removal of Malachite green, a cationic dye from its aqueous solution. The operating variables studied were the amount of adsorbent, solution pH, contact time, temperature and the initial dye concentration. The adsorption data were used to fit in the pseudo-first order and pseudo-second order rate equation in order to investigate the sorption mechanism. Equilibrium isotherm was analyzed using the Langmuir and the Freundlich isotherms. In the present investigation it was found that the adsorption kinetics followed a pseudo second order kinetics for the studied dye concentration range. The negative value of free energy change indicates the spontaneous nature of the adsorption and also suggesting a chemisorption process.     

Flow injection analysis of sulfite ion with a potentiometric titanium phosphate-epoxy based membrane sensor

A novel pH sensor suitable for use in both aqueous and non-aqueous mediums is reported. The sensor is derived from polymer modified electrode obtained from electrochemical polymerisation of aniline in dry acetonitrile containing 0.5 M tetraphenyl borate at 2.0 V versus Ag/AgCl. The light yellow colour polymer modified electrode obtained under the present experimental condition has been characterised by scanning electron microscopy (SEM). The pH sensing of polymer modified electrode in both aqueous and non-aqueous mediums is examined and reported. As the typical examples, we used weak acid (acetic acid) and weak base (ammonium hydroxide) as analytes. The acetic acid is analysed in both aqueous and dry acetonitrile whereas ammonium hydroxide is analysed only in aqueous medium. The analysis in aqueous medium is conducted in 1 mM Tris-HCl buffer pH 7.0 and also in 0.1 M KCl. The slope of pH sensing is calculated from the data recorded in typical buffers and found to be approximately 86 mV per pH. The application of polymer modified electrode for the construction of urea biosensor is described based on immobilised urease within poly vinyl alcohol (PVA) matrix and also within organically modified sol-gel glass on the surface of polymer-modified electrode. The new urea sensor has shown maximum response of 160 mV at 25 degrees C with a lowest detection limit of 20 muM. The performance of new pH sensor and urea sensor has been studied and reported in this communication.     

Acid Phosphatase Assay with a Wireless Magnetoelastic Biosensor

Abstract

A wireless remote‐query disposable magnetoelastic (ME) biosensor was developed for the assay of acid phosphatase (ACP). The sensor was fabricated by applying a magnetoelastic ribbon with a layer of pH‐sensitive polymer and upon it a sensing film containing bovine serum albumin (BSA) and adenosine‐5′‐monophosphate (5′‐AMP). The ACP‐catalyzed hydrolysis of 5′‐AMP decreases the solution pH, resulting in the polymer shrinking and consequently the resonance frequency of the magnetoelastic sensor increasing. The kinetic parameters were measured to be 1.64×10^?3 M (Michaelis constant) and 130 Hz/min (maximum initial rate). The proposed sensor can determine 0.2 to 1.2 U/ml of ACP.     

A simple thiourea based colorimetric sensor for cyanide anion

A simple and easily synthesized colorimetric anion sensor, based on a thiourea moiety as a binding subunit on a 1,2-cyclohexane backbone and a p-nitrophenyl group as a signaling unit, has been synthesized in a one step procedure. The selective sensing of anions, particularly cyanide, has been investigated in DMSO by UV-vis titration, ¹H NMR titration techniques and through ‘naked eye’ observation experiments.     

A new “naked-eye” colorimetric and ratiometric fluorescent sensor for imaging Hg2+ in living cells

A new oligothiophene-based sensor 3 TH for monitoring Hg²⁺ has been designed and synthesized based on the intramolecular charge transfer (ICT) mechanism. The 3 TH shows the significant specificity toward Hg²⁺ through “naked-eye” colorimetric detection as well as via ratiometric fluorescence enhancement response with low detection limit of 62 nM. In addition, sensor 3 TH shows high selectivity and sensitivity for Hg²⁺ with fast response in a suitable pH range. Moreover, the 3 TH-based test strips was used to conveniently detect Hg²⁺ ions in water. Furthermore, considering its good ‘‘turn-on’’ fluorescent sensing behavior and low cell cytotoxicity, 3 TH was successfully applied to detect and image Hg²⁺ in real water samples and living cells, which shows great potentials for application in environmental and biological systems.     

A water-soluble polythiophene-Au nanoparticle composite for pH sensing

In this paper, we report the development of a reversible pH sensor in aqueous medium based on the fluorescence properties of a polythiophene-gold nanoparticle (Au NP) composite. The composite was synthesized in water by simultaneous reduction of HAuCl(4) to Au NPs and polymerization of thiophene in the presence of no additional reagents. It was stable for weeks and had characteristic emissions, which changed in the pH range of 3.0 to 6.0, thus providing a mean for probing the pH of an aqueous solution. Measurement of the pH could be performed over several cycles of titrations, pointing to the robustness of the materials for such sensing applications. The mass spectra of the composite at two extreme pH values were identical, indicating that the primary structure of the polymer was not affected due to changes in pH of the medium. Transmission electron microscopic (TEM) measurements indicated the presence of small sized Au NPs with the polymer in the milieu. The composite could be titrated by acid (or base) and considering the acid-base equilibria at different pHs, we have been able to calculate the pK(eq) of the composite, which was further used in calculating the pH of an aqueous solution from the emission spectrum of the composite. Our approach took advantage of redox chemistry in synthesizing the water-soluble composite and the optical behavior of a conjugated polymer in developing an important pH sensor, which may form the basis of further development of versatile pH or other sensors by suitably modifying the backbone of the monomer.     

Highly chemoselective colorimetric/fluorometric dual-channel sensor with fast response and good reversibility for the selective and sensitive detection of Cu2+

A novel colorimetric and fluorometric dual-channel sensor DA with a favorable optical property and high specificity via a facile synthesis for Cu²⁺ was developed. DA showed a remarkably rapid response and high selectivity for Cu²⁺ over other metal ions with low detection limit of 15.1 nM. The sensing mechanism of DA for Cu²⁺ was based on the chelation-enhanced fluorescence quenching (CHEQ) mechanism, and further confirmed by optical measurements, FTIR, HRMS and DFT calculations. Importantly, DA for sensing Cu²⁺ possessed excellent sensing performances including colorimetric and fluorometric dual-mode detection, fast response, good reversibility, wide pH response range and strong anti-interference ability. Moreover, the DA could be not only applied to quantitatively detect Cu²⁺ in environmental water, food and drink samples, but also show highly colorimetric detection of Cu²⁺ on test strips and silica, indicating its possibility to be utilized as a convenient and low-cost sensor for environment and food monitoring.     

Novel side‐chain naphthalimide polyphenylacetylene as a ratiometric fluorescent chemosensor for fluoride ion

Novel polyphenylacetylene ( P1 ) containing naphthalimides units in the side chain was designed and synthesized. The structure and properties of the polymer were characterized and evaluated by IR, NMR, UV, and PL. The measurements of sensing behavior to various halide anions, that is, F^?, Cl^?, Br^?, and I^?, reveal that the polymer is a ratiometric fluorescent chemosensors for fluoride ion. The polymer sensor shows spectral shifts and intensity changes in the presence of fluoride, in a wavelength‐ratiometric and ‐colorimetric manner, which can detect fluoride concentrations in range of 10–100 μM at visible wavelengths. The obvious colorless‐to‐yellow color change and blue‐to‐orange emission color change on the addition of fluoride ion are easily observed by naked eyes. It provides a feasible way to construct a ratiometric fluorescent chemosensors for fluoride ion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1544–1552, 2009     

The Rapid and Practical Route to Cu@PCR Sensor: Modification of Copper Nanoparticles Upon Conducting Polymer for a Sensitive Non-Enzymatic Glucose Sensor

In this work, rapid, sensitive, practical, and economical strategy for non-enzymatic glucose sensor has been reported based on a modification of copper nanoparticles upon conducting polymer with high surface area (Cu@PCR). Firstly, PCR conducting polymer electrode (PCR) has been successfully fabricated by electrochemical polymerization of a specially synthesized and characterized star-shaped carbazole derivative. Then copper nanoparticles have been successfully electrodeposited on the PCR as a practical method with cyclic voltammetry. The morphologies of the synthesized materials have been characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) measurements. The Cu@PCR sensor platform has been displayed a synergistic effect of high catalytical properties of copper nanoparticles and high electroactive properties of PCR towards the glucose oxidation in alkaline medium. The Cu@PCR sensor platform has shown high sensitivity of 847 μAmM⁻¹cm⁻², good stability (10 weeks), a low detection limit of 0.043 μM, and a fast response of 3 s for the non-enzymatic electrochemical detection of glucose. This organic−inorganic hybrid composite sensor is a promising candidate for the fabrication of a highly sensitive and rapid glucose-sensing with the simple preparation procedure and use of a low-cost precursor.