加性和乘性噪声对随机偏微分方程的激励性（英文）

本文研究加性噪声和乘性噪声对一类随机偏微分方程激励性问题.利用It?公式和能量估计方法方法,得出在两种不同噪声下,相对应的随机偏微分方程噪声激励指标不同.从而从这个角度来看,加性噪声与乘性噪声对随机偏微分方程的影响是不一样的.     

一种低温接收机噪声分时注入的方法

提出一种低温接收机噪声分时注入方法,可以在线对接收机系统进行标定。可以有效地解决大气变化、地表噪声、链路增益变化等对系统定标照成的影响。该方案已应用在国内多台射电望远镜项目中,并获得较理想的效果。     

基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

风力机叶片气动噪声的影响参数*

随着风力机的大型化，风电机组对环境的影响不容忽视，必须对风力机气动噪声进行预测和控制。选取基于NACA、DU翼型的某风力机叶片作为研究基准，采用修正BPM半经验模型计算叶片的气动噪声特性，通过改变翼型族、弦长、机组运行状态、风切变指数、来流风向参数，研究叶片外形几何参数、机组运行工况对叶片气动噪声源的影响。计算结果从多个角度总结出水平轴风力机叶片气动噪声的变化规律，为开发高效低噪风电叶片提供参考。     

The convergence on spectrum of sample covariance matrices for information-plus-noise type data

In this paper,we consider the limiting spectral distribution of the information-plusnoise type sample covariance matrices Cn =1/N (Rn + σXn) (Rn + σXn)*,under the assumption that the entries of Xn are ...     

Extinction Effects of Multiplicative Non-Gaussian L′evy Noise in a Tumor Growth System with Immunization

The extinction phenomenon induced by multiplicative non-Gaussian Levy noise in a tumor growth model with immune response is discussed. Under the influence of the stochastic immune rate, the model is analyzed in terms of a stochastic differential equation with multiplicative noise. By means of the theory of the infinitesimal generator of Hunt processes, the escape probability, which is used to measure the noise-induced extinction probability of tumor cells, is explicitly expressed as a function of initial tumor cell density, stability index and noise intensity. Based on the numerical calculations, it is found that for different initial densities of tumor cells, noise parameters play opposite roles on the escape probability. The optimally selected values of the multiplicative noise intensity and the stability index are found to maximize the escape probability.     

Study on prediction of noise produced by stern wake-duct-propeller interaction

The mechanism and prediction methods of low-frequency discrete spectrmu noise of ducted propellers are studied. The acoustic pressure field of ducted propellers is divided into the propeller radiated field and the duct scattered field based on the linear acoustic theory. First of all, the flow field is analyzed with unsteady panel method to get the unsteady force, and then the pressure data are used as the sources for Ffowcs Williams-Hawings formulation to predict the propeller radiated field, meanwhile, the duct scattered field is obtained by Kirchoff integral equation. Through the analysis and calculation of a ducted propeller case, it is found that the duct scattered sound field is a small quantity compared with propeller radiated sound field under low-frequency and short duct condition; Also the predicted discrete spectrum noise level of ducted propellers is compared with that of full-scale propellers by experiment, verifying the predicted results are able to reflect the full-scale propellers＇ discrete spectrum noise level properly.     

一种在色噪声环境下的信号检测方法

为了抑制蛟龙号载人潜水器水声通信受母船色噪声干扰的影响,本文提出了一种统计匹配滤波器在色噪声环境下使用的新方法,它通过将接收信号映射到一个生成子空间中进行信号检测,可提高输出水声通信信号的信噪比。受客观条件限制,向阳红09船——蛟龙号载人潜水器的试验母船噪声环境比较恶劣,对水声通信产生了较强的干扰。如何在向阳红09船的这种强、色噪声环境下,提升水声同步信号的检测能力,对提高水声通信的可靠性是非常有帮助的。实际采集试验数据分析结果验证了该检测算法比传统匹配滤波器有更强的信号检测能力。     

光静态散射测试系统的研究与实现

随着科学技术的发展,对粒子的大小、浓度及其他特性的探测已经发展成为一个专门的研究领域和现代测量学中的一个重要分支,而光散射法已经成为一种常用的粒子测量方法。为了满足应用需求,文中提出了一种基于C8051F500单片机的光静态散射测试系统方案,详细介绍了该测试系统的设计理论原理、硬件电路的设计依据、固件程序的设计思想和测试系统的具体实现。选取一定浓度的样品溶液,运用该系统进行光散射的角度依赖性测试,实际测量值与理论依据基本相符;在不同激光功率下,对同一角度的散射光强进行测试,将测量得到的数据分析,线性度良好,满足设计要求。     

红外成像系统NETD参数测试算法及应用研究

噪声等效温差(NETD)是表征红外成像系统灵敏度的关键参数,也是评估红外成像系统性能的重要参数之一,应用广泛。通过对红外成像系统3D噪声、信号传递函数(SiTF)、NETD等参数测试方法、算法和流程研究,给出一种基于视频文件的3D噪声离线对比测试方法和一种SiTF线性区自动判断计算斜率算法,在此基础上针对某型技术保障装备国产化光电检测平台开发了配套应用软件功能模块。实现了通过计算单位均方根噪声所对应的SiTF斜率值,分析得出系统NETD参数值的功能。以某型热像仪为被测对象,开展了测试结果重复性和一致性试验,并与美国Optikos公司I-SITE红外整机测试系统进行了对比测试。实验结果表明开发的NETD参数测试功能模块测试精度和重复性满足设计要求,具有较高实用价值,已进行了工程应用。