聚脲多孔材料的简单制备及在酶固定和手性拆分中的应用

以甲苯二异氰酸酯(TDI)为单体,在水与丙酮混合溶剂中通过沉淀聚合一步法制备了富含胺基的聚脲多孔材料(PPU),通过扫描电镜和压汞法对其表面形貌和孔结构进行了表征.PPU经戊二醛(GA)活化后用于荧光假单胞菌脂肪酶(PFL)的固定,考察了GA活化过程中GA浓度对酶固定量及固定酶活性的影响.结果表明,PPU是一种粒子尺寸分布在30~50μm范围的形状不规则的多孔粒子,孔径在2 nm~100μm之间呈连续分布.在pH=8.0的缓冲溶液中用0.17 mol/L的GA对PPU进行改性,将改性后的PPU用于PFL的固定,当酶溶液浓度为2.56 mg/m L时,得到酶的最大固定量为95.2 mg/g,固定酶的活性为375 U/mg,相对活性为76%.将此固定酶作为催化剂,用于1-苯乙醇外消旋化合物的手性拆分,并与游离酶催化的结果相比较.结果表明,固定酶的反应活性和立体选择性都明显优于游离酶.通过沉淀聚合制备的聚脲多孔材料在酶固定及手性分子拆分方面具有应用前景.     

飞秒脉冲作用下氯丙烯的多光子解离和电离动力学

The dissociation and photoionization dynamics of C₃H₅Cl were studied at 200, 400, and 800 nm with femtosecond laser pulses. The time-of-flight mass spectra, laser power index and photoelectron images were recorded. At short wavelength (200 nm), ionization of the parent molecule was found to be the dominant channel, while other ions were generated by the dissociation of C₃H₅Cl⁺. With the shift to long wavelength (e.g., 800 nm), fragment ions became dominant, and were generated through the multiphoton ionization of neutral fragments after the photodissociation of C₃H₅Cl. These results imply that photodissociation plays a significant role at long wavelength, because neutral fragments are supposed to be generated from the intermediate states reached by 800 nm photons. At 400 nm, the dissociation on the intermediate states is also critical, but is not as high as that at 800 nm. Taken together, our results demonstrate that the dissociation/ionization behaviors of allyl chloride are wavelength-dependent, and reveal the complex dynamics of allyl chloride at 200, 400 and 800 nm.     

硫粉为硫源,多元醇辅助合成硫化钼纳米片

MoS₂ nanosheets are prepared with sulfur powder and Na₂MoO₄ by a one-pot two-phase method at 170-200 ℃ for 8 h. In addition, a three-step growth mechanism based on the aggregation and coalescence model is proposed. The reassembly of sulfur powder ensures the transformation from sulfur powder to H₂S to reduce Na₂MoO₄ and plays a key role in the successful preparation of MoS₂ nanosheets. The as-prepared MoS₂ nanosheets are rich in unsaturated sulfur atoms, probably resulting from the dislocation cores of the MoS₂ nanosheets, which have been found to be beneficial for hydrogen evolution reaction catalysis. The method and growth mechanism adopted in this study may be applied to other transition metal dichalogenides for similar structures. The facile and green method provides an alternative for the preparation of MoS₂ nanosheets.     

聚吡咯/多壁碳纳米管及其聚氨酯导电复合材料的制备和性能

以羧基化多壁碳纳米管(MWCNTs)做模版剂,采用化学氧化法将吡咯(Py)在羧基化MWCNTs表面聚合制备PPy/MWCNTs导电材料,将其添加到溶剂型聚氨酯(PU)溶液中制备了PPy/MWCNTs/PU导电复合材料,研究了Py用量对PPy/MWCNTs及其PU复合材料性能的影响.研究表明,随Py用量的增加,PPy/MWCNTs的长度不变,管径增大,sp~2和sp~3杂化C含量先提高后减少,N的掺杂梯度降低,PPy/MWCNTs的导电率高于羧基化MWCNTs和PPy.当Py用量为羧基化MWCNTs的20%时,其导电率最大.PPy/MWCNTs中N元素的掺杂程度及其管径变化是引起PPy/MWCNTs/PU复合材料的性能不同的主要原因.增加Py用量,MWCNTs中亲水的羧基因对PPy掺杂而消耗,相同导电材料用量时纳米导电粒子数目相对减少,PPy/MWCNTs/PU复合材料的耐水性能提高,定向应力、储能模量和玻璃化温度降低,导电率先增加后减小.当Py用量为羧基化MWCNTs的15%时,导电率最大.     

氮、硫共掺杂的碳负载的钴@碳化钴:一种高效的非贵金属氧还原电催化剂

Development of high-efficiency and low-cost electrocatalysts for large-scale oxygen reduction reaction (ORR) remains a challenge. In this study, we employed melamine, trithiocyanuric acid, and cobaltous nitrate to fabricate a novel ORR electrocatalyst with cobalt and cobalt carbide supported on carbon co-doped with nitrogen and sulfur (hereafter referred to as MTC-0.1-900) by two-step pyrolysis. The MTC-0.1-900 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) specific surface area analysis, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance for ORR was investigated by cyclic voltammetry and linear sweep voltammetry in 0.1 mol·L^-1 KOH solutions. The results showed that the onset potential and half-wave potential of MTC-0.1-900 were 29 and 5 mV superior to the commercial Pt/C catalyst, respectively. After 12000 s operation at the potential of -0.3 V (vs Ag/AgCl), the current retention capacities of MTC-0.1-900 and Pt/C were 97.1% and 76.7%, respectively. MTC-0.1-900 also showed better methanol tolerance than Pt/C. These unique properties of MTC-0.1-900 provide us with an alternative for replacing or reducing the use of Pt catalyst in metal-air battery cathode materials.     

大族长度为pq的伪随机k元序列

Mauduit与Sárkzy在一系列论文中研究了κ元序列的伪随机性.本文通过对模pq剩余类环Z_(pq)进行分割,进而结合离散对数的方法,构造了一大族长度为pq的伪随机κ元序列,并证明其具有很好的伪随机性.     

三项指数和四次均值的精确计算公式(2)

本文进一步深入研究了三项指数和四次均值的计算问题.运用指数和的相关性质并结合求解同余方程组的方法与技巧,利用两种不同的方法获得了两个精确的均值计算公式,揭示了三项指数和的计算与同余方程组解的个数之间的本质联系,推广了已有的结果.     

二项指数和四次混合均值的计算

本文研究了二项指数和四次均值的计算问题.利用初等数论及代数数论的方法获得了一个精确的计算公式以及一个转换公式,推广了已有的结果,揭示了均值计算与同余方程组的本质联系.     

基于EV模型ND样本加权和的相合性

本文研究变系数EV模型的ND样本加权和的相合性问题.利用ND序列的Bernstein型不等式和截尾的方法,获得了ND样本加权和sum from i=1 to n(W_(ni)(t_0)Y_i)的强、弱相合性,推广了独立随机变量加权和的相合性.     

基于S-R和分解定理的几何非线性问题的数值计算分析

为了探究几何非线性问题的数值求解方法,采用理论推导、MATLAB编程计算、有限元模拟相结合的方法,基于S-R和分解定理及更新拖带坐标描述法,运用插值型无单元Galerkin方法对几何非线性问题的增量变分方程进行了推导,并通过四点Gauss积分法和不动点迭代法对其进行求解.最后以平面悬臂梁的大变形问题为例进行求解计算,发现与ANSYS的计算结果拟合相似度很高,说明了所采用的几何非线性力学理论及数值计算方法的正确性和合理性,为求解几何非线性问题提供了一种新的依据.