二(1-正丁基茚基)四羰基二钌的合成与晶体结构

由C9H6-n-BuH与Ru3(CO)12在二甲苯中加热回流, 合成了一个新的双核配合物(η5-C9H6-n-Bu)2Ru2(CO)4. 通过元素分析、红外光谱、核磁共振氢谱对其结构进行了表征. 用X射线单晶衍射法测定了(η5-C9H6-n-Bu)2Ru2(CO)4的结构, 结果表明: 晶体属于三斜晶系, Pī空间群, a＝0.8880(5) nm, b＝1.2337(8) nm, c＝1.3235(8) nm, α＝83.054(12)°, β＝76.683(10)°, γ＝77.036(12)°, V＝1.3713(15) nm3, Dc＝1.588 g•cm－3, m＝1.134 mm－1, F(000)＝658, Z＝2, R1＝0.0993, wR2＝0.2459.     

微量稀土对奥氏体耐热钢高温力学性能的影响

研究了微量稀土对Cr21Ni11N奥氏体耐热不锈钢高温热塑性及高温持久性能的影响.结果表明:在750～1250℃范围内,稀土显著提高耐热钢的热塑性,消除800℃的塑性低凹区,扩宽安全热加工温度范围近75℃.稀土显著延长耐热钢的高温持久寿命约3～5倍,并提高持久断裂塑性.钢中添加稀土后,其蠕变断裂机制由楔形裂纹为主的机制逐渐转变为空洞裂纹为主的机制,高温持久断口附近的楔形裂纹明显减少,且断口呈典型的韧窝状塑性断口特征.     

双面碎片的英文文件复原方法研究

对英文材料的双面规则碎片文件复原问题进行了研究.由于碎片边界是规则的几何形状,无法采用几何形状匹配算法进行复原,为此提出了基于碎片边缘像素特征的匹配复原算法,建立了双面二维灰度匹配数学模型.通过加入行约束条件,减少横向匹配中的纵向误差,并通过消除列匹配中的误差,优化了匹配算法.该模型可以实现块状双面英文碎片的完整复原.     

基于质量控制的供应链计划问题研究

为了研究基于质量控制的供应链计划问题,采用了优化建模的方法,分析了易腐物品生命周期函数的选用及拟合原则,建立起了质量衰减成本与时间之间的关系,考虑了涉及交通及天气情况的运输风险,最终建立了优化模型,以实现供应链运行总成本最小。最后,提出了动态规划的求解方法,并通过仿真实验证明了算法的有效性。     

The influence of thermally assisted tunneling on the performance of charge trapping memory

We evaluate the influence of the thermally assisted tunneling (TAT) mechanism on charge trapping memory (CTM) cell performance by numerical simulation, and comprehensively analyse the effects of the temperature, trap depth, distribution of trapped charge, gate voltage and parameters of TAT on erasing/programming speed and retention performance. TAT is an indispensable mechanism in CTM that can increase the detrapping probability of trapped charge. Our results reveal that the TAT effect causes the sensitivity of cell performance to temperature and it could affect the operational speed, especially for the erasing operation. The results show that the retention performance degrades compared with when the TAT mechanism is ignored.     

纳秒级前沿PFN-MARX发生器充放电特性

为了改善脉冲形成网络(PFN)-Marx发生器的输出波形,得到前沿较短、纹波因数尽可能小的输出波形,对单级PFN的特性进了仿真研究,包括PFN中末端电容、末端电感、PFN的阻抗等因素对单级PFN的输出波形的影响;建立了PFN-Marx发生器的整体仿真模型,并对采用耦合电感作为隔离电感和采用分立电感作为隔离电感进行了仿真研究。研究表明:采用耦合电感作为隔离电感可以使各级PFN的充电波形更加一致,效果更好。搭建了一个小型的PFN-Marx发生器,并研究了PFN-Marx发生器中气体开关在不同气压下导通时输出波形的差异,结果表明,升高气压有利于减小PFN-Marx发生器输出波形的前沿持续时间。     

Adaptive optimization on ultrasonic transmission tomography-based temperature image for biomedical treatment

Hyperthermia has proven to be beneficial to treating superficial malignancies, particularly chest wall recurrences of breast cancer. During hyperthermia, monitoring the time–temperature profiles in the target and surrounding areas is of great significance for the effect of therapy. An ultrasound-based temperature imaging method has advantages over other approaches. When the temperature around the tumor is calculated by using the propagation speed of ultrasound, there always exist overshoot artifacts along the boundary between different tissues. In this paper, we present a new method combined with empirical mode decomposition(EDM), similarity constraint, and continuity constraint to optimize the temperature images. Simulation and phantom experiment results compared with those from our previously proposed method prove that the EMD-based method can build a better temperature field image, which can adaptively yield better temperature images with less computation for assistant medical treatment control.     

Study of the temperature rise induced by a focusing transducer with a wide aperture angle on biological tissue containing ribs

We used the spheroidal beam equation to calculate the sound field created by focusing a transducer with a wide aperture angle to obtain the heat deposition, and then we used the Pennes bioheat equation to calculate the temperature field in biological tissue with ribs and to ascertain the effects of rib parameters on the temperature field. The results show that the location and the gap width between the ribs have a great influence on the axial and radial temperature rise of multilayer biological tissue. With a decreasing gap width, the location of the maximum temperature rise moves forward; as the ribs are closer to the transducer surface, the sound energy that passes through the gap between the ribs at the focus decreases,the maximum temperature rise decreases, and the location of the maximum temperature rise moves forward with the ribs.     

Modeling of trap-assisted tunneling on performance of charge trapping memory with consideration of trap position and energy level

In this work, the trap-assisted tunneling(TAT) mechanism is modeled as a two-step physical process for charge trapping memory(CTM). The influence of the TAT mechanism on CTM performance is investigated in consideration of various trap positions and energy levels. For the simulated CTM structure, simulation results indicate that the positions of oxide traps related to the maximum TAT current contribution shift towards the substrate interface and charge storage layer interface during time evolutions in programming and retention operations, respectively. Lower programming voltage and retention operations under higher temperature are found to be more sensitive to tunneling oxide degradation.     

Tunable acoustic radiation pattern assisted by effective impedance boundary

The acoustic wave propagation from a two-dimensional subwavelength slit surrounded by metal plates decorated with Helmholtz resonators(HRs) is investigated both numerically and experimentally in this work. Owing to the presence of HRs, the effective impedance of metal surface boundary can be manipulated. By optimizing the distribution of HRs,the asymmetric effective impedance boundary will be obtained, which contributes to generating tunable acoustic radiation pattern such as directional acoustic beaming. These dipole-like radiation patterns have high radiation efficiency, no fingerprint of sidelobes, and a wide tunable range of the radiation pattern directivity angle which can be steered by the spatial displacements of HRs.