Microfabrication and imaging XPS analysis of ITO thin films

In this paper the microfabrication of ITO (tin‐doped indium oxide) films by the sol–gel process combined with chemical modification is presented. The microfabricated ITO thin film could be obtained through a one‐step process that combines film patterning with film leaching. The morphology and chemical components of the patterned ITO thin films were assessed by microscopy and XPS, respectively. Imaging XPS analysis is an effective way to evaluate the quality of the fine patterning. Copyright © 2007 John Wiley & Sons, Ltd.     

Large‐Sized Fabrication of Tunable Plasmonic Electrodes Via Electrodeposition

Electrodeposition method, a simple, cheap, and flexible approach, to fabricate gold nanoparticle (Au NPs) films with an area larger than 1 cm² on indium tin oxide (ITO) electrodes modified with (3‐mercaptopropyl) trimethoxysilane (MPTMS) was presented. Size‐controllable and high loading Au NPs were obtained, which were characterized by field‐emission scanning electron microscopic (FESEM) and UV‐vis spectroscopy. Our current method provides a versatile and facile pathway to fabricate large‐scale metal nanoparticles thin film, enhancing alternatives for academic investigation and industrial application.     

An investigation of the microstructure,optical and electrical properties of ZITO thin film using the sol–gel method

The multi-compound ZITO transparent conductive oxide (TCO) thin films were synthesized using the sol–gel method. The ZITO thin films with various volume ratios of ZnO to ITO (1:1, 2:1 and 9:1) were crystallized at different temperatures (600–700 °C). The results showed that the crystalline characteristics and optical transmittance were mainly dependent on ITO content and crystallization. Notably, the 650 °C Z₉ITO film not only had better conductivity but also possessed excellent optical transmittance. In addition, the surface roughness of the ZITO films and optoelectric properties of IZO (indium doped ZnO) films were analyzed to confirm the contribution of indium dopants on the optical transmittance. Also, the ZITO films were subjected to the effects of indium and tin dopants and this improved the related characteristics of ZnO films.     

Synthesis of Novel CuO Nanosheets with Porous Structure and Their Non‐Enzymatic Glucose Sensing Applications

Novel CuO thin films composed of porous nanosheets were in situ formed on indium tin oxide (ITO) by a simple, low temperature solution method, and used as working electrodes to construct nonenzymatic glucose sensor after calcinations. Cyclic voltammetry revealed that the CuO/ITO electrode calcinated at 200 °C exhibited better electrocatalytic activity for glucose. For the amperometric glucose detection, such prepared electrode showed low operating potential of 0.35 V and high sensitivity of 2272.64 μA mM^?1 cm^?2. Moreover, the CuO/ITO electrode also showed good stability, reproducibility and high anti‐interference ability. Thus, it is a promising material for the development of non‐enzymatic glucose sensors.     

SnO2 thin films doped indium prepared by the sol–gel method: structure, electrical and photoluminescence properties

This paper reports on the preparation, characterization, electrical and optical properties of tin oxide (SnO₂) thin films doped indium prepared by the sol–gel method and deposited on glass substrates with dip coating technique. X-ray diffraction patterns showed an increase in the crystallinity of the films with increase in annealing temperatures. Atomic force microscopy analyses revealed an increase of grain growth with raise in annealing temperature. The film surface revealed positive skewness and kurtosis values less than 3 which make them favorable for OLEDs applications. The lowest resistivity (about 10^?7) was obtained for the ITO films annealed at 500 °C. These films acquire n-type conductivity due to the non-stoichiometric in the films like (interstitial tin atoms) and also due to low indium doping concentration. The optical properties of the films have been studied from transmission spectra. An average transmittance of >80 % in ultraviolet–visible region was observed for all the films. Optical band gap energy (E _gap) of ITO films was found to vary in the range of 3.69–3.81 eV with the increase in annealing temperature. This slight shift of E _gap to higher photon energies could be related to the crystalline nature of the films associated with the decrease in the defect concentration caused by annealing. Photoluminescence spectra of the films exhibited an increase in the emission intensity with increase in annealing temperature. The high temperature annealing would be expected to decrease the density of defects, improve the crystal orientation and reduce the traps for non-radiative transition and also increase the oxidation processes.     

Simple chemical route for nanorod-like cobalt oxide films for electrochemical energy storage applications

We used a simple chemical synthesis route to deposit nanorod-like cobalt oxide thin films on different substrates such as stainless steel (ss), indium tin oxide (ITO), and microscopic glass slides. The morphology of the films show that the films were uniformly spread having a nanorod-like structure with the length of the nanorods shortened on ss substrates. The electrochemical properties of the films deposited at different time intervals were studied using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS). The film deposited after 20 cycles on ss gave the highest specific capacity of 67.6 mAh g^?1 and volumetric capacity of 123 mAh cm^?3 at a scan rate 5 mV s^?1 in comparison to 62.0 mAh g^?1 and 113 mAh cm^?3 obtained, respectively, for its counterpart on ITO. The film electrode deposited after 20 cycles on ITO gave the best rate capability and excellent cyclability with no depreciation after 2000 charge–discharge cycles.     

Luminescence of monolayer thin films of the fully conjugated rigid‐rod polymer poly(p‐phenylenebenzobisthiazole)

Poly(p‐phenylenebenzobisthiazole) (PBT) is a heterocyclic, aromatic rigid‐rod polymer with a fully conjugated backbone and excellent dimensional, thermo‐oxidative, and solvent stabilities. A PBT polymer with an intrinsic viscosity of 18.0 dL/g was dissolved in methanesulfonic acid or Lewis acid. The PBT solution was spin‐coated and doctor‐bladed for freestanding films or onto an indium tin oxide (ITO) substrate. The acid was removed via coagulation. Scanning electron microscopy determined that the resultant film thicknesses were about 340 and 60 nm for PBT freestanding films and films on the ITO substrate, respectively. X‐ray scattering demonstrated that the freestanding films were in‐plane isotropic without long‐range order. The freestanding films were excited with a He‐Cd laser at 325 nm for photoluminescence (PL) response. PL spectra showed a distinct intensity maximum at 580 nm, regardless of the film‐forming conditions. After the films cooled to 67 K, the PL maximum shifted to 566 nm with enhanced intensity. Aluminum was evaporated onto the monolayer PBT thin film on the ITO substrate as an electron injector for electroluminescence (EL) response. Diodic electric behavior was observed for all monolayer PBT EL devices for the first time. A threshold voltage as low as 4 V was achieved for the monolayer EL devices. In addition, PBT EL spectra were tunable, with a maximum intensity at 570 nm at a bias voltage of 4.5 V changing to 496 nm at 7.5 V (i.e., a blueshift) with greatly increased intensity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1760–1767, 2002     

Characterization of Nano‐porous TiO2 Film Prepared by Sol‐gel Process and Its Application to Dye‐sensitized Solar Cell

In this paper, effects of ethylene glycol (EG) and indium tin oxide (ITO) solution on the morphology, porosity, and roughness of TiO₂ film prepared by sol‐gel process were investigated and discussed. Initially, the addition of EG were used to control the viscosity of the solution and it was found to increase the pore size of TiO₂ film. The various TiO₂ films were investigated and characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) and then assembled to dye‐sensitized solar cell (DSSC) to measure the photoelectric conversion efficiency. The optimum efficiencies of 1.32% with J_sc and V_oc of 2.99 mA/cm² and 0.80 V, respectively, were obtained by the TiO₂ film prepared from a solution containing 20 wt% EG.     

(110)‐Oriented ZIF‐8 Thin Films on ITO with Controllable Thickness

(110)‐oriented zeolitic imidazolate framework (ZIF)‐8 thin films with controllable thickness are successfully deposited on indium tin oxide (ITO) electrodes at room temperature. The method applied uses 3‐aminopropyltriethoxysilane (APTES) in the form of self‐assembled monolayers (SAMs), followed by a subsequent adoption of the layer‐by‐layer (LBL) method. The crystallographic preferential orientation (CPO) index shows that the ZIF‐8 thin films are (110)‐oriented. A possible mechanism for the growth of the (110)‐oriented ZIF‐8 thin films on 3‐aminopropyltriethoxysilane modified ITO is proposed. The observed cross‐sectional scanning electron microscopy (SEM) images and photoluminescent (PL) spectra of the ZIF‐8 thin films indicate that the thickness of the ZIF‐8 layers is proportional to the number of growth cycles. The extension of such a SAM method for the fabrication of ZIF‐8 thin films as described herein should be applicable in other ZIF materials, and the as‐prepared ZIF‐8 thin films on ITO may be explored for photoelectrochemical applications.     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electrochemical Cholesterol Sensor Based on Tin Oxide‐Chitosan Nanobiocomposite Film

A chitosan (CS)‐tin oxide (SnO₂) nanobiocomposite film has been deposited onto an indium‐tin‐oxide glass plate to immobilize cholesterol oxidase (ChOx) for cholesterol detection. The value of the Michaelis–Menten constant (K_m) obtained as 3.8 mM for ChOx/CS‐SnO₂/ITO is lower (8 mM) than that of a ChOx/CS/ITO bioelectrode revealing enhancement in affinity and/or activity of ChOx towards cholesterol and also revealing strong binding of ChOx onto CS‐SnO₂/ITO electrode. This ChOx/CS‐SnO₂/ITO cholesterol sensor retains 95% of enzyme activity after 4–6 weeks at 4 °C with response time of 5 s, sensitivity of 34.7 μA/mg dL^?1 cm² and detection limit of 5 mg/dL.     

Ultrathin Carbon Film Electrodes from Vacuum‐Carbonised Cellulose Nanofibril Composite

A novel way to produce ultrathin transparent carbon layers on tin‐doped indium oxide (ITO) substrates is developed. The ITO surface is coated with cellulose nanofibrils (from sisal) via layer‐by‐layer electrostatic binding with poly(diallyldimethylammonium chloride) or PDDAC acting as the binder. The cellulose nanofibril‐PDDAC composite film is then vacuum‐carbonised at 500 °C. The resulting carbon films are characterised by atomic force microscopy (AFM), small angle X‐ray scattering (SAXS), wide‐angle X‐ray scattering (WAXS), and Raman methods. Smooth carbon films with good adhesion to the ITO substrate are formed. The electrochemical characterisation of the carbon films is based on the oxidation of hydroquinone and the reduction of benzoquinone in aqueous phosphate buffer media. A modest effect of the cellulose nanofibril‐PDDAC film on the rate of electron transfer is observed. The effect of the film on the rate of electron transfer after carbonisation is more dramatic. For a 40‐layer cellulose nanofibril‐PDDAC film after carbonisation a two‐order of magnitude change in the rate of electron transfer occurs presumably due to a better interaction of the hydroquinone/benzoquinone system with the electrode surface.     

A Highly Selective Poly(thiophene)‐graft‐Poly(methacrylamide) Polymer Modified ITO Electrode for Neuron Specific Enolase Detection in Human Serum

In this study, an impedimetric immunosensor based on polymer poly(thiophene)‐graft‐poly(methacrylamide) polymer (P(Thi‐g‐MAm)) modified indium tin oxide (ITO) electrode is developed for the detection of the Neuron Specific Enolase (NSE) cancer biomarker. First, the P(Thi‐g‐MAm) polymer is synthesized and coated on the ITO electrode by using a spin‐coating technique. P(Thi‐g‐MAm) polymer acts as an immobilization platform for immobilization of NSE‐specific monoclonal antibodies. Anti‐NSE antibodies are utilized as biosensing molecules and they bind to the amino groups of P(Thi‐g‐Mam) polymer via glutaraldehyde cross‐linking. Spin‐coating technique is employed for bioelectrode fabrication and this technique provides a thin and uniform film on the ITO electrode surface. This bioelectrode fabrication technique is simple and it generates a suitable platform for large‐scale loadings of anti‐NSE antibodies. This immunosensor exhibits a wide linear detection range from 0.02 to 4 pg mL^?1 and with an ultralow detection limit of 6.1 fg mL^?1. It reveals a good long‐term stability (after 8 weeks, 78% of its initial activity), an excellent reproducibility (1.29% of relative standard deviation (RSD)), a good repeatability (5.55% of RSD), and a high selectivity. In addition, the developed immunosensor is proposed as a robust diagnostic tool for the clinical detection of NSE and other cancer biomarkers.     

Polyaniline/Single‐Walled Carbon Nanotubes Composite Based Triglyceride Biosensor

Nanocomposite film comprising of polyaniline (PANI) and single walled carbon nanotubes (SWCNT) has been fabricated onto indium‐tin‐oxide (ITO) coated glass plate using electrophoretic technique. Co‐immobilization of glycerol dehydrogenase (GDH) and lipase (LIP) has been done via N‐ethyl‐N′‐(3‐dimethylaminopropyl) carbodiimide and N‐hydroxysuccinimide chemistry to explore its application for triglyceride (tributyrin) sensing. Response studies have been done using linear sweep voltammetry revealing that LIP‐GDH/PANI‐SWCNT‐TB/ITO bioelectrode can detect tributyrin in the range of 50 to 400 mg dL^?1 with low Michaelis–Menten constant of 1.138 mM, improved response time of 12 s, high sensitivity as 4.28×10^?4 mA mg^?1 dL and storage stability of about 13 weeks.     

Characterization of ABTS at a Polymer‐Modified Electrode

ABTS, 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonate), a colorless dianion that forms a colored radical upon oxidation, was characterized with electrochemistry and spectroscopy and demonstrated to be a detectable analyte in a polymer‐modified spectroelectrochemical sensor. Three positively charged polymers were incorporated into a thin film on an indium tin oxide (ITO) optically transparent electrode and used to concentrate ABTS at the electrode surface. Of the three films, poly(vinylbenzyl trimethyl ammonium chloride)‐poly(vinyl alcohol) (PVTAC‐PVA), poly(diallyldimethylammonium chloride)‐silica (PDMDAAC‐SiO₂), and quaternized poly(4‐vinyl‐N‐methylpyridinium nitrate)‐silica (QPVP‐SiO₂), PVTAC‐PVA demonstrated the best ability to absorb ABTS. Within 20 min, a change of 0.2 absorbance units at 417 nm and 13.6 μA/cm² in anodic peak current density in cyclic voltammetry at a scan rate of 0.025 V/s were observed.     

Non‐covalent Immobilization of Iron‐triazole (Fe(Htrz)3) Molecular Mediator in Mesoporous Silica Films for the Electrochemical Detection of Hydrogen Peroxide

Mesoporous silica thin films encapsulating a molecular iron‐triazole complex, Fe(Htrz)₃ (Htrz=1,2,4,‐1H‐triazole), have been generated by electrochemically assisted self‐assembly (EASA) on indium‐tin oxide (ITO) electrode. The obtained modified electrodes are characterized by well‐defined voltammetric signals corresponding to the Fe^II/III centers of the Fe(Htrz)₃ species immobilized into the films, indicating fast electron transfer processes and stable operational stability. This is due to the presence of a high density of redox probes in the material (1.6×10^?4 mol g^?1 Fe(Htrz)₃ in the mesoporous silica film) enabling efficient charge transport by electron hopping. The mesoporous films are uniformly deposited over the whole electrode surface and they are characterized by a thickness of 110 nm and a wormlike mesostructure directed by the template role played by Fe(Htrz)₃ species in the EASA process. These species are durably immobilized in the material (they are not removed by solvent extraction). The composite mesoporous material (denoted Fe(Htrz)₃@SiO₂) is then used for the electrocatalytic detection of hydrogen peroxide, which can be performed by amperometry at an applied potential of ?0.4 V versus Ag/AgCl and by flow injection analysis. The organic‐inorganic hybrid film electrode displays good sensitivity for H₂O₂ sensing over a dynamic range from 5 to 300 μM, with a detection limit estimated at 2 μM.     

Nonvolatile write‐once read‐many‐times memory behaviors of polyimides containing tetraphenyl fluorene core and the pendant triphenylamine or carbazole moieties

To better understand the structure–property relationships, two novel aromatic diamines containing tetraphenyl fluorene (TPF) moiety through triphenylamine (TPA) unit and carbazole (Cz) unit modification are designed and synthesized, respectively. Four thermally stable and excellent solubility polyimides are prepared and characterized. The excellent film‐formation ability and thin film stability are investigated by X‐ray diffraction (XRD) and atom force microscopy (AFM) measurements, respectively. The memory devices are fabricated, PIs films with low water uptakes sandwiched between indium‐tin oxide (ITO) ground electrode and Al top electrode, and exhibit nonvolatile write‐once read‐many‐times (WORM) memory behaviors with low threshold voltages, due to increasing the retention time through regulating the energy level. The current conduction mechanisms of all devices are linearly fitted by theoretical conduction model. Molecular simulations are used to demonstrate switching mechanism and the memory effects. The experimental results provide a sight for the design‐adjustable switching voltage of memory devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1630–1644     

Mussel‐Inspired Polydopamine Coating for Flexible Ternary Resistive Memory

In recent years, numerous organic molecules and polymers carrying various functional groups were synthesized and used in fabrication of wearable electronic devices. Compared to previous materials that suffer from poisonousness, stiffness and complex film fabrication, we circumvent above matters by taking advantage of mussel‐inspired polydopamine as our active material to realize resistive random access memories (RRAMs). Polydopamine thin films were grown on indium tin oxide glass catalyzed by Cu₂SO₄/H₂O₂ and characterized by Fourier infrared spectroscopy (FT‐IR), UV/Vis spectroscopy and scanning electron microscopy. The Al/Polydopamine film/ITO devices possess ternary memory behavior with good ternary device yield with two threshold voltages around 1.50 V and 3.50 V, long data retention over 10⁴ s of continuous reading or 10⁴ pulse reading. The two resistance switchings are attributed to defects functioning as charge traps and the formation of conductive filaments. A flexible device based on Al/polydopamine film/ITO/polyethylene terephthalate retains its ternary memory behavior after being bent with a bending radius of 1.54 cm and bending cycles up to 5000, demonstrating good compatibility and flexibility of polydopamine.     

Chemical‐Bath‐Deposited Indium Oxide Microcubes for Solar Water Splitting

We fabricated films of cubic indium oxide (In₂O₃) by chemical bath deposition (CBD) for solar water splitting. The fabricated films were characterized by X‐ray diffraction analysis, Raman scattering, X‐ray photoelectron spectroscopy, and scanning electron microscopy, and the three‐dimensional microstructure of the In₂O₃ cubes was elucidated. The CBD deposition time was varied, to study its effect on the growth of the In₂O₃ microcubes. The optimal deposition time was determined to be 24 h, and the corresponding film exhibited a photocurrent density of 0.55 mA cm^?2. Finally, the film stability was tested by illuminating the films with light from an AM 1.5 filter with an intensity of 100 mW cm^?2.     

Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.