硼氢化钾还原-气相分子吸收光谱仪测定水中的总汞及其不确定度的评定

以硼氢化钾代替二氯化锡作还原剂,用气相分子吸收光谱仪代替测汞仪,冷原子吸收法测定了水中总汞,按有关规范的原则和方法评定了其测量不确定度。结果表明,检出限为0．005μg／L,精密度RSD为1．O％,加标回收率为99．1％～103．1％,测定海洋局外控样和IERM测量审核样的结果良好,测定汞标样的相对误差为1．7％。此法测定样品的扩展不确定度为3．5％。     

硼氢化钾还原肉桂醛合成肉桂醇的工艺研究

针对硼氢化钾还原肉桂醛制备肉桂醇的工艺,研究了反应物的物质的量之比、还原体系、反应时间、反应温度等因素对反应收率的影响.结果表明,在KBH4-THF-CH3CH2OH还原体系中,通过控制n(肉桂醛)∶n(硼氢化钾)=3∶1,在室温下反应1.5h,收率可达92.2%.     

A new procedure to enols of 2-acylmethyl-4,4-dimethyl-2-oxazolines underultrasonically dispersed potassium system

Various enols of 2-acylmethyl-4,4-dimethyl-2-oxazolines were prepared in moderate yields via ultrasonically catalyzed reactions of 2,4,4-trimethyl-2-oxazoline with arenecarboxylic esters in the presence of UDP-t-BuCl-i-Pr2NH system.     

Activity Coefficients of Potassium Chloride in Water–Ethanol Mixtures

Activity coefficients of KCl were determined in water–ethanol solvents in the range 5–20% (w/w) ethanol, from experimental electromotive force (emf) data. The molalities varied from 0.1 mol-kg^–1 to near saturation and measurements were taken in the temperature range 25 to 45°C. The Pitzer model was used to describe the nonideal behavior of the electrolyte and the corresponding coefficients were determined for each solvent. The Pitzer–Simonson equations were also applied and found superior in the study of KCl in those nonaqueous solutions.     

靛蓝胭脂红-高碘酸钾-草酸钠催化光度法测定钢中微量钒

研究了在1 mol/L磷酸介质中，钒(V)对KIO4氧化靛蓝胭脂红褪色反应的催化作用及草酸钠的活化作用，建立了一种测定钒的方法。无草酸钠时该体系为准零级反应，表观活化能为76.7 kJ/mol，在22℃时钒量在0～5mg/L范围内与?A呈线性，检出限为0.1　mg/L。在草酸钠存在下则为准一级反应，表观活化能为60.1 kJ/mol，钒量在0～mg/L范围内与1g(A0/A)呈线性，检出限为0.02mg/L。提高介质酸度，可显著降低反应温度。在NaF及尿素存在下，大多数常见离子无干扰。本法简便快速，选择性和灵敏度较高，用于钢中微量钒的直接测定，结果满意。     

Carbon dioxide reforming of methane on monolithic Ni/Al2O3-based catalysts

Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal (Na, K) oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.     

钾元素对生物质主要组分热解特性的影响

采用热重-红外联用仪对松木及生物质主要化学组分半纤维素、纤维素、木质素的热解特性及钾元素对其热解特性的影响进行了研究.结果表明,半纤维素、纤维素、木质素发生热解的主要温度分别为200~350 ℃、300~365 ℃和200~600 ℃;半纤维热解产物中CO、CO₂较多;纤维素热解产物中LG和醛酮类化合物最多;木质素热解主要形成固体产物,气体中CH₄相对含量较高.三种组分共热解过程中发生相互作用使热解温度提高、固体产物增加,气体中CO增加而CH₄减少.添加K₂CO₃后半纤维素和纤维素热解温度区间向低温方向移动,固体产率提高.K对纤维素作用最明显,CO、CO₂气体与固体产物产率明显增加,醛酮类和酸类物质的产率降低;木质素受K影响相对较小,热解固体产物略有增加,挥发分中H₂O和羰基物质增加;三组分共热解减弱了钾元素的催化作用.     

Rapid Synthesis of N-Acyl Ureas from Their Thio Analogues Using Wet Silica-Supported Permanganate Under Solvent-Free Conditions

A rapid method to N-acyl ureas from corresponding N-acyl thioureas is described. N-coumaroyl-N′-arylthioureas, which are easily prepared by the reaction of coumarin-3-carboxylic acid chloride with potassium thiocyanate and arylamines, can be expeditiously transformed into corresponding N-acyl ureas via r.t. grinding with wet silica supported potassium permanganate under solvent-free conditions in an excellent yield.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.     

The Effect of Volume Reorganization of Amorphous Poly(ethylene Terephthaiate) on Thermal Properties

When poly(ethylene terephthalate) was quenched from above T_g and then heated, it exhibited a step increase in thickness in the glass transition region at every rate tested. When the polymer was cooled more slowly than it was heated, a higher T_g and a slightly larger step increase in thickness were observed as the cooling rate was reduced. These experimental results appear to be adequately interpreted on the basis of the normal structural changes that occur in a glass as its thermal history is varied. Two observations, however, were not easily included in this view. First, the polymer, on cooling from above T_g, exhibited an abnormally high expansion coefficient over much of the range of temperature in which it exists as a fluid. Second, the polymer exhibited a step increase in thickness when it was heated at the same rate at which it had previously been cooled.