On standardization of low symmetry crystal fields

Standardization methods of low symmetry – orthorhombic, monoclinic and triclinic – crystal fields are formulated and discussed. Two alternative approaches are presented, the conventional one, based on the second-rank parameters and the standardization based on the fourth-rank parameters. Mainly f-electron systems are considered but some guidelines for d-electron systems and the spin Hamiltonian describing the zero-field splitting are given. The discussion focuses on premises for choosing the most suitable method, in particular on inadequacy of the conventional one. Few examples from the literature illustrate this situation.     

A review on textile sonoprocessing: A special focus on sonosynthesis of nanomaterials on textile substrates

The chemical and physical effects of ultrasound with a frequency above 16 kHz, higher than the audible frequency of the human ear, have proven to be a useful tool for variety of systems ranging from the application of ultrasound in environmental remediation to the cooperation of ultrasound waves with chemical processing regarding as sonochemistry. Ultrasound opened up new advances in textile wet processing including desizing, scouring, bleaching, dyeing, printing and finishing and also nanoprocessing including nanopretreatment, nanodyeing, nanoprinting and nanofinishing. Use of ultrasound appears to be a promising alternative technique to reduce energy, chemicals and time involved in various operations. Over the past years there has been an enormous effort on using sonochemistry for the synthesis of nanomaterials on various textile materials. In situ sonosynthesis of nanoparticles and nanocomposites on different textiles is a pioneering approach driving future investigations. With such wide range of applications and vast ever increasing publications, the objective of this paper is presenting a comprehensive review on ultrasound application in textile from early time to now by the main emphasis on the sonosynthesis of nanomaterials outlining directions toward future research.     

Synthesis and electrochemical properties of copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions

In this study, new chalcone compound 1 , new phthalonitrile derivatives 2 and 3, new copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions were synthesized. Electrochemistry of tetra-(4-{(2 E )-3-[2-fluoro-4-(trifluoromethyl)phenyl]prop-2-enoyl}phenoxy) substituted Co(II)Pc and Mn(III)Pcs were studied with cyclic voltammetry (CV) to determine the redox properties of the phthalocyanines. According to the results, while the CuPcs 2a and 3a showed two Pc based reduction reactions and one Pc based oxidation reaction, MnPcs 2b and 3b gave two metal-based reduction reactions. All the redox processes are shifted toward positive potentials as a result of the increased electron-withdrawing ability of the trifluoromethyl substituents.     

The production of enantiomerically pure 1-phenylethanol by enzymatic kinetic resolution method using response surface methodology

As the enantiomers of 1-phenylethanol are valuable intermediates in several industries, the lipase catalyzed kinetic resolution of (R,S) -1-phenylethanol is a relevant research topic. In this study, the goal was to determine the optimum reaction parameters to produce enantiomerically pure 1-phenylethanol by lipase (Novozyme 435) catalyzed kinetic resolution using response surface methodology (RSM). Reactions were performed with 40–400 mM (R,S)-1-phenylethanol, 120–1200 mM vinyl acetate and 2–22 mg/mL biocatalyst concentrations (BC _L ), at 20–60 °C and with a stirring rate of 50–400 rpm for 5–120 min. The samples were analyzed using high performance liquid chromatography (HPLC) with a Chiralcel OB column. Optimum reaction parameters to reach 100% enantiomeric excess for the substrate ( ee _s ) were determined as follows: substrate concentration (C _s ): 240 mM, BC _L : 11 mg/mL, at 42 °C with a reaction time of 75 min. Model validation was performed using these conditions and ee _s was calculated as 100%, which indicates the predicted model was efficient and accurate. When compared to the literature, it was observed that the reaction time decreased significantly. This is an important result considering the industrial scale perspective.     

Usage of deep eutectic solvents for the digestion and ultrasound-assisted liquid phase microextraction of copper in liver samples

In this study, we used deep eutectic solvents for digestion and ultrasound-assisted emulsification liquid phase microextraction (UA-ELPME) of copper in liver samples. Different types of DESs were prepared for digestion and microextraction steps. DESs consisting of lactic acid and choline chloride for the digestion step and DESs consisting of tetrabuthylamonium chloride and decanoic acid for ultrasound-assisted emulsification liquid phase microextraction were used in this method. The liver samples were digested by using DES-based digestion method. After digestion step, Cu(II) ions in aqueous phase were complexed with sodium dimethyl dithiocarbamate (NaDMDTC) and the obtained hydrophobic complex was extracted to tetrabuthylamonium chloride-decanoic acid DES phase. A microsample injection system coupled with flame atomic absorption spectrometer (MS-FAAS) was used in the detection of copper. LOD, LOQ, PF and % RSD were determined as 4.00, 13.2 µg L^??1, 10 and 3.2%, respectively. The proposed microextraction procedure was successfully applied to copper contents of the liver samples.     

Comparison of Penta and Tetra-pyridyl Cobalt-based Catalysts for Water Reduction: H2 Production Cycle,Solvent Response and Reduction Free Energy

Understanding water reduction towards H₂ generation is crucial to overcome today's renewable energy obstacles. Previous studies have shown the superior H₂ production performances of Cobalt based penta-pyridyl (CoaPPy) and tetra-pyridyl (CoaTPy) complexes in solution. We investigate H₂ production cycles of CoaPPy and CoaTPy complexes immersed in water solution by means of Ab-initio Molecular Dynamics and Density Functional Theory. We monitor dynamic properties of the systems, solvent response and structural changes occurring in the catalysts, by simulating all intermediate steps of the H₂ production cycle. Reduction free energies and reorganization energies are calculated. Our results show that, following the first electron injection, H₂ production proceeds with the singlet spin state. Following the first electron insertion, we observe a significant rearrangement of the hydrogen bonding network in the first solvation shell. The cobalt center turns out to be more accessible for the surrounding water molecules in the case of CoaTPy at all the intermediate steps, which explains its higher catalytic performance over CoaPPy. Following the first reduction reaction, a larger gain in reduction free energy is estimated for CoaTPy with respect to CoaPPy, with a difference of 0.14 eV, in line with the experiments. For the second reduction, instead, CoaPPy shows more negative reduction potential, by 0.41 eV.     

Diffraction of electromagnetic waves by a resistive half-plane in magneto-ionic plasma

The interaction of magnetic polarized electromagnetic wave with a resistive half-plane in magneto-ionic plasma is investigated. The method of transition boundary is used for the evaluation of the diffracted wave. The excitation of surface waves is examined in the medium and their diffracted fields are derived by using the diffraction theory for grazing incidence. The uniform field expressions are obtained with the aid of the uniform theory for evanescent waves. The behaviours of the derived scattered waves are studied numerically.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.