Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Glass fabrics self-cracking catalytic growth of boron nitride nanotubes

Glass fabrics were used to fabricate boron nitride nanotubes (BNNTs) with a broad diameter range through a combined chemical vapor deposition and self-propagation high-temperature synthesis (CVD-SHS) method at different holding times (0min, 30min, 90min, 180min and 360min). SEM characterization has been employed to investigate the macro and micro structure/morphology changes of the glass fabrics and BNNTs in detail. SEM image analysis has provided direct experimental evidences for the rationality of the optimized self-cracking catalyst VLS growth mechanism, including the transformation situations of the glass fabrics and the BNNTs growth processes respectively. This paper was the further research and compensation for the theory and experiment deficiencies in the new preparation method of BNNTs reported in our previous work. In addition, it is likely that the distinctive self-cracking catalyst VLS growth mechanism could provide a new idea to preparation of other inorganic functional nano-materials using similar one-dimensional raw materials as growth templates and catalysts.     

硅衬底上锗硅合金光波导设计及工艺的优化考虑

报道用射频加热化学气相沉积法制备Ｓｉ／ＧｅＳｉ／Ｓｉ大断面单模脊形光波导中设计和工艺的进一步完善，ＧｅＳｉ合金层中Ｇｅ的含量Ｘ要满足脊形光波导是单模，光波导的数值，孔径接近单模光纤值，脊高小于临界厚度值等，计算表明兼顾上述三项要求应取ｘ＝１～３％，脊的高与宽受大断面及单模的制约。Ｓｉ的晶体结构使脊的二个腐蚀侧壁是斜坡，为此起始脊宽取５～６μｍ为宜；腐蚀液，抛光液的选取人保证脊则壁及波导面端的优良镜     

5 μm thick 3C-SiC layers grown on Ge-modified Si(100) substrates

The effect of the germanium coverage prior to the epitaxial growth of 5 μm thick 3C-SiC on Si(100) substrates were evaluated with Atomic Force Microscopy and μ-Raman spectroscopy. The 3C-SiC layers were grown by atmospheric pressure chemical vapor deposition via a special procedure leading to layers with compressive instead of tensile stress. The Ge amount was varied from 0 up to 2 ML. The obtained results showed that the residual stress inside the layers is shifted in the compressive direction; the crystalline quality is improved with the Ge introduction but on the account of the surface roughness. These results open the route for the use of Ge-modified Si(100) as a potential substrate in order to improve the heteroepitaxial growth of 3C-SiC on silicon substrates.     

不同形貌氧化锌纳米棒的CVD法制备及生长机制讨论

采用CVD技术制备了不同形貌的ZnO纳米棒.并利用XRD、SEM、能谱仪、荧光光谱仪对比研究了其表面结构、成份、相结构及光致发光特性.结果表明,样品形貌随着沉积位置的变化而变化,其生长遵循金属自催化机制.并且表明离子化氧空位的存在有利于ZnO的绿光发射.     

The Influence of Window Parameters on the Transmission Characteristics of Millimeter Waves

This work reports about the influence of some window parameters, such as the mechanical tolerance of disk thickness, the variation of distance between two disks, and the frequency drift during gyrotron operation on the transmission characteristics of millimeter waves. Detailed calculations of the transmission characteristics for a single-disk gyrotron window and frequency tunable double-disk plasma fusion torus windows have been performed. The geometry of the window units has been optimized in order to obtain a suitable transmission characteristic, i.e. power reflection less than –20 dB within a frequency bandwidth of about 1 GHz around the chosen frequencies.     

Combinatorial synthesis of carbon nanotubes by the catalytic chemical vapor deposition method

Summary Bimetallic (Fe-Co) catalyst samples prepared from different precursors over various supports were tested in carbon nanotube (CNT) production. In order to quicken the evaluation of the performance of the catalysts a combinatorial arrangement was used.</o:p>     

Development of Output Windows for High-Power Long-Pulse Gyrotrons and EC Wave Applications

Electron cyclotron heating (ECH) is one of the main candidates for heating and current drive on ITER (170 GHz) and W7-X (140 GHz). High unit power (1 MW or greater) and high efficiency single-mode continuous-wave (CW) gyrotrons are under development in order to reduce significantly the systems costs. Face-cooled double-disk sapphire and silicon nitride windows (FC-75 liquid cooling), cryogenically edge-cooled single-disk sapphire (liquid nitrogen, liquid neon or liquid helium cooling) and silicon (230 K refrigerator cooling) windows, water-edge-cooled single-disk CVD-diamond windows and water-cooled distributed windows are being investigated in order to solve the window problem. A water-cooled window has two very important advantages; it employs a cheap and effective coolant and it is compact and probably more reliable than other solutions and thus can also be easily used as a torus window. The present paper summarizes the development status of high-power millimeter-wave windows with emphasis on CVD diamond.     

石英衬底上Au缓冲层对ZnO薄膜微结构的影响

采用单源化学气相沉积(SSCVD)法,在石英衬底上以Au为缓冲层,Zn4(OH)2(O2CCH3)6.2H2O为固相源制备ZnO薄膜。SEM和XRD测试ZnO薄膜的微结构,结果表明:相对于SiO2衬底上生长的ZnO薄膜,Au/SiO2衬底上生长的ZnO薄膜具有较好的结晶质量和表面平整度;对制备ZnO薄膜的衬底温度进行了工艺优化,结果表明:500℃时制备的ZnO薄膜颗粒大小均匀,结晶质量较好;通过荧光光谱仪对Au/SiO2衬底上的ZnO薄膜进行光致发光(PL)谱测试,ZnO薄膜在400nm出现紫光发射峰,而没有出现与缺陷相关的深能级发射峰,表明ZnO薄膜具有较好的结晶质量。