基于小波变换和灰度共生矩阵的轮胎花纹检索

针对在用离散小波变换中提取纹理特征缺少纹理的空间分布特性问题,提出引入方向测度的灰度共生矩阵(Gray Level Co-occurrence Matrix,GLCM)与离散小波分解相互融合的算法,在低频子带上借助方向测度引入权值因子的方法提取灰度共生矩阵的六个统计量,用生成的综合特征来描述轮胎花纹的纹理构成,用欧式距离进行相似性度量。实验结果表明,融合算法能够有效提高检索效率,改进方法的检索效率优于用传统的灰度共生矩阵和小波变换提取纹理方法的检索效率。     

融合底层和中层字典特征的行人重识别

针对当前行人重识别方法采用单一底层特征识别率较低的问题,提出一种融合底层和中层特征的识别方法,由粗到精对人体目标进行匹配识别。首先提取目标的颜色直方图和纹理直方图进行粗分类;然后将人体目标分为头部、躯干和腿部3个部分。忽略包含信息量较少的头部,对躯干和腿部,提出一种中层图像块字典提取方法,并对照该字典生成中层特征,进行精确分类。底层特征结合中层特征使算法既具有较好的区分度,又具有良好的泛化能力。实验结果表明本文算法在VIPeR数据库上的n AUC比已有方法提高6.3%,对遮挡和背景粘连的鲁棒性更好。     

Two Theorems about Similarity Maps

One of the problems arising when exploring toponome or other multivariate-image data is the following: Given a family of n gray-value images of, e.g., a given sample of cell tissue, indexed by a collection of n proteins under investigation (so-called MELK data) — each single image representing the varying local concentration of one of those n proteins at the various sites (pixels) of the given sample, how should one quantify, for any two pixels (or clusters of pixels), the (dis)similarity between the corresponding “vectors” of local protein concentrations in question. Some (dis)similarity mappings defined on allowing for fast OpenGL texture mapping turned out to be useful in visual inspection of toponome data. Here, we derive two rather general results regarding similarity and dissimilarity mappings and, as a corollary, the fact that the functions that were used for visual inspection of MELK data are, indeed, metrics. We believe that our results are, however, also of more general interest within the ongoing program of elucidating the structure of metrics from a more abstract point of view. Received April 01, 2005     

Complexes in the Naphthoquinone Series: Crystal Structures,Electronic Structures,Stability

It is shown that the charge transfer is negligible in the ground state for organic charge transfer complexes between phenols and quinones. Our objective Is to determine the origin of the stability of the complexes. The geometric, electronic and energetic properties of these complexes were examined by three techniques, crystal structure determination by X-ray diffraction, spectrum and charge transfer calculation by quantum chemical methods, and lattice energy computation.     

Synthesis and properties of novel thermotropic liquid crystalline copoly(ester-imide)s

Four novel copoly(ester-imide)s based on 3,3',4,4'-biphenyltetracarboxylic dianhydride,bis(trimellitic acid anhydride) phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase.Polarizes light microscopy(PLM) and differential scanning calorimetry(DSC) have shown that three polymers formed the nematic phase with thread schlieren...     

基于185例肺小结节CT图像灰度共生矩阵纹理特征的多水平模型研究

为探讨基于肺小结节CT图像灰度共生矩阵纹理特征的多水平模型,对北京友谊医院和宣武医院提供的185例2137张肺小结节CT图像提取4种灰度共生矩阵纹理特征。根据该类资料具有层次结构的特点,拟合多水平统计模型。结果表明,能量,熵和惯性矩,在患者水平上具有聚集性,且在良恶性肺小结节间的差异有统计学意义(P值均小于0.001),提示多水平模型可以灵活有效地处理肺小结节CT图像这类具有层次结构的数据,在一定程度上有利于早期肺癌的鉴别诊断。     

Growth and characterization of highly c‐axis textured SrTiO3 thin films directly grown on Si(001) substrates by ion beam sputter deposition

Highly c‐axis textured SrTiO₃ (STO) thin films have been directly grown on Si(001) substrates using ion beam sputter deposition technique without any buffer layer. The substrate temperature was varied, while other parameters were fixed in order to study effect of substrate temperature on morphology and texture evolution of STO films. X‐ray diffraction, pole figure analysis, atomic force microscope, and high‐resolution electron microscopy were used to characterize and confirm quality and texture of the STO films. The experimental results show that optimum substrate temperature to achieve highly c‐axis textured films is at 700 °C. The full width at half maximum (FWHM) of 002_STO was found to be 2° and fraction of (011) orientation was as low as 1%. The surface morphology was Volmer‐Weber growth mode with a small roughness ∼1 nm. The lowest leakage current density (5.8 μA/cm² at 2 V) and the highest dielectric constant (ε_STO ∼ 98) were found for highly c‐axis textured films grown at 700 °C. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

小波基的选取对图像去噪的影响

小波图像去噪方法是现代图像处理中的重要组成部分，小波基的不同选取直接影响到去噪的效果．本文在全局阈值的标准下，通过对噪声水平和图像纹理特征的估计，讨论了小波基的正交性和线性相位性对去噪结果的不同影响，提出了选取小波基的近似标准．     

Texture development during cold rolling of Fe–Cr–Ni alloy-experiments and simulations

Abstract

In the present work, evolution of microstructure and crystallographic texture during cold rolling of two phase Fe–Cr–Ni alloy was investigated. Fe–Cr–Ni alloy (in initially solution annealed condition) was uni-directionally cold rolled in a laboratory rolling mill to different thickness reductions. Scanning electron microscopy was used to observe the changes in microstructure, while X-ray diffraction was used to investigate changes in crystallographic texture of austenite and ferrite (through changes in orientation distribution function). Crystallographic texture was also simulated using different crystal plasticity models (Full constraint Taylor, relaxed constraint Taylor (lath and pancake) and co-deformation Visco Plastic Self Consistent (VPSC)). With the increase in plastic deformation, there were morphological as well as crystallographic changes in the microstructure. Strong α-fibre (RD//〈1?1?0〉) texture was developed in ferrite, while brass ({1?1?0}〈1?1?2〉) and Goss ({1?1?0}〈0?0?1〉) was dominant in austenite after 80% cold rolling. The formation of brass type texture after deformation has been attributed to the formation of shear bands and presence of strong crystallographic texture in the initial solution annealed material. Both Taylor as well as VPSC models could not capture the changes in texture with deformation accurately. For ferrite: γ-fibre (ND//〈1?1?1〉) and for austenite: Cu ({1?1?2}〈1?1?1〉) component was always present in the simulated textures. Possible reason for this could be the pining effect of interface boundaries and non-incorporation of non-crystallographic shear banding in the Taylor and VPSC models.     

Effect of thermomechanical processing on microstructural evolution and deformation behaviour of polycrystalline magnesium under quasi-static and high strain rate conditions

Abstract

The effect of thermomechanical processing on microstructure evolution and room temperature flow behaviour of polycrystalline magnesium in compression at strain rates of ~10^?2 and ~10³ s^?1 was investigated. Different initial microstructures were produced by optimising rolling and annealing cycles. Prior to annealing for 1 h at 350 °C, Mg samples were processed by two different treatments such as (i) hot rolling at 350 °C and (ii) hot rolling at 350 °C plus cold rolling at room temperature. Introduction of cold working step led to an increased fraction of hard oriented grains with a marginal grain size difference in post-annealed samples. A profound effect of thermomechanical processing on strain hardening rate as well as rate-sensitive flow behaviour of Mg was observed. The influence of prior processing history and strain rate on flow behaviour of Mg was clearly reflected in terms of texture strengthening/weakening phenomena and formation of microstructural deformation bands.