Improved Performance of Phthalocyanine Derivative Field-Effect Transistors by Inserting a Para-Quarterphenyl as the Inducing Layer

We investigate the phthalocyanine derivative organic field-effect transistors （OFETs） using a novel para - quaterphenyl （p-4p） as the inducing layer. Compared to the devices without the p-4p inducing layer, the performances of p-type （copper phthalocyanine） and n-type （fluorinated copper phthaloeyanine） OFETs with optimized thickness of p-4p thin films are greatly enhanced. Both the field-effect mobility and the on/off ratio of the two-type devices are improved by one order of magnitude compared to those of the control devices. This re- markable improvement is attributed to the introduction of p-4p, which can form a highly oriented and continuous phthalocyanine derivative film with the molecular π - π stack direction parallel to the substrate.     

融合全局与局部多样性特征的人脸表情识别

通常主成分分析(PCA)只能保持数据的全局结构,邻域保持嵌入(NPE)算法只能保持邻域样本间的相似性,忽略了其差异性。针对上述问题,提出了一种融合全局与局部多样性的特征提取算法,并将其应用于人脸表情识别中。该算法利用PCA算法保持全局结构,并通过流形学习思想定义局部差异离散度和局部相似离散度,结合最大局部散度差准则,有效刻画出局部流形结构的多样性;将全局特征和局部多样性特征相结合,提取出低维流形特征用于表情分类。在JAFFE和Cohn-Kanade人脸表情数据库上的实验表明,该算法与PCA、局部保持投影(LPP)、NPE等算法相比,不仅有效地提高了识别率,而且在取得最高识别率时所需维数最低,证明了此算法在识别效果方面的优越性。     

Optical binding forces between plasmonic nanocubes： A numerical study based on discrete-dipole approximation Optical binding forces between plasmonic nanocubes： A numerical study based on discrete-dipole approximationOptical binding forces between plasmonic nanocubes： A numerical study based on discrete-dipole approximation

Plasmonic nanocubes are ideal candidates in realizing controllable reflectance surfaces, unidirectional nanoantennas and other plasmon-associated applications. In this work, we perform full-wave calculations of the optical forces in three- dimensional gold nanocube dimers. For a fixed center-to-center separation, the rotation of the plasmonic nanocube leads to a slight shift of the plasmonic resonance wavelength and a strong change in the optical binding forces. The effective gap and the near field distribution between the two nanocubes are shown to be crucial to this force variation. We further find that the optical binding force is dominated by the scattering process while the optical forces in the wavevector direction are affected by both scattering and absorption, making the former relatively more sensitive to the rotation of （an effective gap between） the nanocubes. Our results would be useful for building all-optically controllable meta-surfaces.     

模糊合作博弈局中人参与水平间相互作用度量

本文基于经典合作博弈局中人间相互作用现象的有关度量方法,针对具有模糊联盟的合作博弈问题,给出了模糊联盟中各局中人参与水平间相互作用的度量方法,定义了水平间相互独立性概念,建立了反映局中人各参与水平间相互作用平均程度的两指标:Shapley相互作用指标及Banzhaf相互作用指标.同时对于具有k-单调性的模糊合作博弈局中人参与水平间的边缘相互作用的有关性质作了进一步研究,得出了一些新的结论.     

物流客户服务水平的综合评价研究

本文在客户问卷调查的基础上,结合国外有关的物流企业客户服务指标,建立了物流客户服务水平评价的指标体系,同时应用定性与定量分析相结合的方法,建立了属性综合评价的物流客户服务水平评价模型,并给出了具体的应用实例.     

Power distribution in Yb~(3+)-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model. Numerical simulation results are obtained. The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

Power distribution in Yb3+-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model.Numerical simulation results are obtained.The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

不可压N-S方程的差分流线扩散法

In this paper, a Finite-Difference Streamline-Diffusion (FDSD as short) scheme for the incompressible Navier-Stokes Equations is constructed with linear finite element spaces. The analysis showes that the scheme considered has good stability and higher accuracy than the standard finite elemnet method.     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

晶种导向下干胶法合成ZSM-5分子筛

以廉价水玻璃为硅源,在晶种替代有机模板剂的条件下采用干胶法合成了ZSM-5分子筛。利用XRD、SEM、TEM、FTIR、N_2吸附-脱附和NH_3-TPD等分析方法对合成样品进行了表征和测试,考察了合成条件对ZSM-5分子筛晶化过程的影响。结果表明,在硅铝比(n/n)为30~70,钠硅比(n/n)为0.12~0.20时都可以得到结晶度良好的ZSM-5分子筛。研究发现,干胶法合成ZSM-5,在不引入外加水的情况下也可以得到ZSM-5样品,外加水的引入能够有效地提高晶化速率;与水热法合成ZSM-5分子筛相比,干胶法可以显著地缩短晶化时间,同时,合成样品的晶体尺寸也有所减小。