Simultaneous Measurement of Transverse Load and Temperature Using a single Long—Period Fibre Grating Element

A single long-period fibre grating (LPFG)element written by focused high-fraequency CO2 laser pulses is demonstrated for simultaneous measurement of transverse load and temperature.Temperature and transverse load can be directly measured by detecting the resonant wavelength shift and the resonant peak amplitude change of the LPFG,respectively,as there are two special circular orientations along the fibre axis where the resonant peak amplitude change of the LPFG has a linear relationship with the load applied and is insensitive to the resonant wavelength shift.Such a sensor could solve the cross-sensitivity problem between transverse load and temperature due to the unique feature of this type of LPFG,i.e. the wavelength-load-sensitivity of the LPFG strongly depends on loading orientations due to the non-uniform distribution of the refractive index on the cross-section of the LPFG caused by the thermal shock effect and other effects of the high-frequency CO2 laser pulses exposure method used.     

Schottky Barrier Height Inhomogeneity of Ti／n—GaAs Contact Studied by the I—V—T Technique

The current-voltage characteristics of Ti/n-GaAs Schottky diodes measured over a temperature range of 78-299K have been interpreted on the basis of thermionic emission across an inhomogeneous Schottky contact.The experiment shows that the apparent barrier height (φap) increases from 0.437eV at 78K to 0.698eV at room temperature.the plot of φap versus 1/T does not exhibit a simple linear relationship over the whole temperature range,indicating that the barrier height distribution is more complicated than the frequently observed single Gaussian distribution.A new multi-Gaussian distribution model is developed.Our experimental results can be explained by a double Gaussian distribution of the barrier heights.The weight,the mean barrier height,and the standard deviation of the two Gaussian functions are 0.00001 and 0.99999,0.721 and 0.696,0.069 and 0.012eV,respectively.     

Optical Properties of ZnFe2O4—SiO2 Granular Films Prepared by Radio—Frequency Magnetron Sputtering

We report on the optical properties of ZnFe2O4-SiO2 granular films prepared on quartz substrates by the radio-frequency magnetron sputtering method.Post-annealing was performed at different temperatures under flow oxygen atmosphere.The morphology and Structures of ZnFe2O4 nanoparticles were characterized by x-ray different line types in the optical absorption curves of ZnFe2O4-SiO2 granular films.The critical transition of line types occurs when ZnFe2O4 changes from amorphous to crystalline,and the transition temperature increases with the increasing content of ZnFe2O4.There is an obvious blueshift of the optical absorption edge of the granular films with the decreasing annealing temperature.     

Sound Field Calculations of Elliptical Pistons by the Superposition of Two—Dimensional Gaussian Beams

We present an alternative approach to calculate the sound field of ultrasonic transducers.The distribution function of sources is expanded into the superposition of a series of two-dimensional Gaussian functions.The corresponding radiated sound field is expressed as the superposition of these two-dimensional Gaussian beams and is then reduced to the computation of these simple functions.This treatment does not require the condition that the shape of the source is of circular axial symmetry.A numerical example is presented for the uniform elliptical piston transducer and this is in good agreement with the results given by complicated computation.     

Fifth—Order Harmonic Generation using a Coherent Controlled Two—Pulsed Optical Field

We have experimentally studied the characteristics of fifth-order harmonic radiation produced by two coherent femtosecond laser pulses with a changeable relative phase.The intensities of harmonic generation are found to increase with the coherent degree.In one optical Period,the temporal variation of harmonics exhibits an asymmetric characteristic,which is interpreted in terms of ionization theory and the deformation of the wave packets of fundamental field contribution to harmonic generation.     

Modification of Absorption of a Bulk Material by Photonic Crystals

We show theoretically that it is possible to modify absorption of a bulk absorbing material by inserting another non-absorbing dielectric slab periodically to form one-dimensional photonic crystals.It is found that,for frequencies within photonic bandgaps,absorption is always suppressed.For frequencies located at photonic bands,absorption can be suppressed or enhanced,which depends on the relative values of the real refractive index of the absorbing and non-absorbing dielectric layers.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

在白噪声分析中的广义维里拉普拉斯

一类广义维里拉普拉斯，把在白噪声分析构架中通常定义的维里拉普拉斯作为特殊情形而包含。     

SYNTHESIS OF MACROPOROUS COPOLYMER OF VCA AND DVB

The reactivity ratios of vinyl acetate(VAc) and divinyl benzene (DVB) were calculated from the Q and e values.The possibility of the copolymerization of these two monomers was predicted and the copolymerization was carried out by suspension polymerization technique in the presence of pore producing agent (toluene and gasoine).The relative ratio of acetoxy group and benzene ring in the copolymer were monitored by IR measurement during the polymerization.The variation of pore properties,such as spectific surface area,porosity and average pore diameter,with polymerization time were determined.The copolymers at various polymerization time were alcoholyzed and thus the variation of the hydroxyl group content with polymerization time was studied.     

火花熔蚀-电感耦合等离子体光谱法分析地质矿物

火花熔蚀-电感耦合等离子体光谱法(SA-ICP)用于测量锆石中铪-锆比值和锰铁矿瘤中的铈、钴、铁、铅、镍和磷。用信背比和信嗓比的序贯单纯形优化法建立了用于高压火花和氩气ICP系统的六个操作参数。将磨细的样品与铜压成饼,从样品中熔蚀出的分析物和基体元素的原于发射信号的时间相关性给出一种用火花来作选择取样的方法。测量锆石中的铪、锆浓度比的精密度为4%(相对标准偏差)。对于锰铁矿瘤,根据分析线对锰(Ⅱ)257.610纳米线强度比的光谱测量结果达到分析精密度范围为7-14%(相对标准偏差)。分析的准确度用参比物USGS诺得(Nod)P-1的标准物加入法来决定,而与锰浓度的测量无关。