Fullerene compounds with general formulae C60Ox (x = 1–3): Isomerism,stability and polarizability

1. Download : Download high-res image (144KB)
2. Download : Download full-size image

     

Dicationic disiloxane ionic liquids

1. Download : Download high-res image (64KB)
2. Download : Download full-size image

     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

A modified model for isothermal homogeneous and heterogeneous reactions in the boundary-layer flow of a nanofluid

The homogeneous and heterogeneous reactions in the boundary-layer of a flat surface are considered. The autocatalysts are assumed to be of regular sizes, while the solution is a dilute nanofluid. The heat release due to the chemical reactions is taken into account. The Buongiorno's model is used to describe the behaviors of this reaction system. This configuration makes the current model be different from all previous publications. Multiple solutions are given numerically to the rescaled nonlinear system, whose stability is verified. The results show that the strength coefficients of the homogeneous and heterogeneous reactions are key factors to cause the appearance of the multiple solutions in the distribution of the chemical reactions. Nanofluids enhance the diffusion of heat and help maintain the stability of chemical reactions.     

Stability of Multiplier Ideal Sheaves

Chinese Annals of Mathematics, Series B - In the present article, the authors find and establish stability of multiplier ideal sheaves, which is more general than strong openness.     

连续梁在周期荷载下的动力稳定性简化分析方法

对于一般任意支撑的连续梁结构动力稳定性问题，已有的计算方法求解过程都很复杂，给工程设计带来极大的不便．本文提出了一个简化的分析方法，利用现有的商业软件，只需求得连续梁的自然频率及静力屈曲（失稳）荷载，就可容易得到结构的动力失稳区域，当考虑结构阻尼对不稳定区域的影响时，可将阻尼矩阵表达为Rayleigh阻尼的形式．研究结果表明：采用本文计算方法与已有的理论计算方法得到的连续梁主参数共振的不稳定边界非常吻合，而本文计算方法更为简单，计算结果可靠，计算精度高，可满足工程设计的需要．     

Cover Image

This paper presents a framework for incorporating arbitrary implicit multistep schemes into the lattice Boltzmann method. While the temporal discretization of the lattice Boltzmann equation is usually derived using a second-order trapezoidal rule, it appears natural to augment the time discretization by using multistep methods. The effect of incorporating multistep methods into the lattice Boltzmann method is studied in terms of accuracy and stability. Numerical tests for the third-order accurate Adams-Moulton method and the second-order backward differentiation formula show that the temporal order of the method can be increased when the stability properties of multistep methods are considered in accordance with the second Dahlquist barrier.     

Analysis of several subcycling schemes in partitioned simulations of a strongly coupled fluid-structure interaction

Fluid-structure interaction (FSI) simulations are used extensively to calculate the vibration of structures subjected to an internal or external flow. In the case of partitioned FSI simulations, separate flow and structure solvers are used, which requires some kind of coupling between both. The time step in both solvers is typically taken the same, but this unnecessarily leads to long calculation times when the time step is small due to stability reasons in one of the two solvers. Subcycling, the procedure where the time step of one solver is chosen smaller than the time step used in the other solver, may reduce the computational cost of the FSI simulation. The subcycling procedure can be either explicit or implicit, the latter implying the use of coupling iterations in each time step. Contrary to explicit subcycling, no stability analyses of implicit subcycling schemes are found in the literature. In this paper, the temporal stability of the implicit subcycling procedure is investigated. The one-dimensional flow in an elastic cylindrical tube is studied analytically. The results of this analysis are subsequently compared to a partitioned two-dimensional axisymmetric FSI calculation with implicit coupling between the flow and structure solvers.     

等热流密度加热垂直下降液膜的研究

利用等热流密度加热条件下降膜流动的三维模型方程进行线性稳定性分析和数值模拟。线性稳定性分析表明，模型方程在小到中等Reynolds数下都适用，并且流向不稳定性增长率随着Reynolds数和Marangoni数增加而增加，展向不稳定性增长率则随着Marangoni数增加而增加，随着Reynolds数增加而减小，流向和展向对扰动波数都存在一个不稳定区间。三维数值模拟表明，在等热流密度加热条件下，液膜在随机扰动的情况下最终会形成带孤立波的三维溪流状结构，液膜与气体的换热也因溪流状结构的出现而加强；在随机扰动的基础上引入占优势地位的展向最不稳定扰动会使得换热增强，液膜会提前破裂；在随机扰动的基础上引入占优势地位的流向最不稳定扰动时，液膜的换热会增强，但不会提前破裂；在随机扰动的基础上同时引入占优势地位的流向和展向最不稳定扰动时，换热会加强且液膜会提前破裂。