气泡在超声场中绕圈运动的高速摄影及其图像分析

借助高速摄影和图像分析技术对首次发现的附壁气泡的绕圈现象进行了实验研究,重点研究游移气泡的运动轨迹、附壁气泡的布阵过程、气泡的来源以及气泡的振动细节.研究发现游移绕圈气泡的运动轨迹呈现出不稳定、不规则、不光滑的特点.阵列气泡源于游移气泡,而游移气泡变成阵列气泡的方式主要是通过合并增大体积,从而减小所受的Bjerknes力,降低活性的方式实现的.游移气泡源于ALF(acoustic lichtenberg figure)空化云中大量空泡的合并,使以径向振动为主的空泡逐渐过渡到以表面波动为主的气泡.阵列气泡在Bjerknes力的作用下呈现出规则的表面波动,而体积更小受力更大的游移空泡的表面完全失稳,呈现极不规则的形貌,并对附近阵列气泡的表面波动产生影响.阵列气泡呈现出十分规则的排布,相邻阵列气泡之间的振动相位是相反的,表现为相互排斥.     

Acoustics of a Bubbly Liquid with a Weak Chemical Reaction in the Gaseous Phase

The influence of the composition and thermophysical properties of gas-liquid bubbly systems with a dissociating component in the gaseous phase on the laws of small-disturbance propagation and attenuation is investigated. It is found that the reacting gas component in the bubbles significantly affects the sonic-wave attenuation coefficient in the bubbly liquid. This follows from the fact that when a gas bubble is compressed isothermally, a recombination reaction occurs which prevents pressure growth in the bubble.Small-disturbance propagation in bubbly liquids was investigated in a number of publications discussed in review [1]. The acoustics of a bubbly liquid with a gas phase containing active admixtures are of both methodical and practical interest. The dynamics of such multicomponent bubbles were investigated in [2].     

气泡振动的非线性耦合模型

我们推广了Longuet-Higgins关于各向同性气泡的非各向同性模式激发的二阶理论。着重注意“呼吸”模式和“变形”模式之间的相互作用,两个模式之间的能量交换足够强,以致于两个模式有同量级的振幅。文中指出:模式耦合的方程组类似于其他物理领域(如非线性光学、水波)所研究的方程组,并讨论了二种特解,考虑了平衡点及其稳定性。     

Formation and Amplification of Shock Waves in a Bubble “Cord”

The structure and dynamics of the wave field generated by a bubble system in the form of an axial bubble cylinder (cord) excited by a plane shock wave propagating along the axis in an axisymmetric shock tube are numerically examined. It is shown that consecutive excitation of oscillations of the bubble zone results in formation of a quasi-steady shock wave in the cord and in the ambient liquid. Results of the numerical analysis of the maximum amplitude of the resulting wave as a function of problems parameters are described.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 46–52, September–October, 2005.     

Study on the bubble transport mechanism in an acoustic standing wave field

The use of bubbles in applications such as surface chemistry, drug delivery, and ultrasonic cleaning etc. has been enormously popular in the past two decades. It has been recognized that acoustically-driven bubbles can be used to disturb the flow field near a boundary in order to accelerate physical or chemical reactions on the surface. The interactions between bubbles and a surface have been studied experimentally and analytically. However, most of the investigations focused on violently oscillating bubbles (also known as cavitation bubble), less attention has been given to understand the interactions between moderately oscillating bubbles and a boundary. Moreover, cavitation bubbles were normally generated in situ by a high intensity laser beam, little experimental work has been carried out to study the translational trajectory of a moderately oscillating bubble in an acoustic field and subsequent interactions with the surface. This paper describes the design of an ultrasonic test cell and explores the mechanism of bubble manipulation within the test cell. The test cell consists of a transducer, a liquid medium and a glass backing plate. The acoustic field within the multi-layered stack was designed in such a way that it was effectively one dimensional. This was then successfully simulated by a one dimensional network model. The model can accurately predict the impedance of the test cell as well as the mode shape (distribution of particle velocity and stress/pressure field) within the whole assembly. The mode shape of the stack was designed so that bubbles can be pushed from their injection point onto a backing glass plate. Bubble radial oscillation was simulated by a modified Keller–Miksis equation and bubble translational motion was derived from an equation obtained by applying Newton’s second law to a bubble in a liquid medium. Results indicated that the bubble trajectory depends on the acoustic pressure amplitude and initial bubble size: an increase of pressure amplitude or a decrease of bubble size forces bubbles larger than their resonant size to arrive at the target plate at lower heights, while the trajectories of smaller bubbles are less influenced by these factors. The test cell is also suitable for testing the effects of drag force on the bubble motion and for studying the bubble behavior near a surface.     

微通道局部加热气泡动力学实验研究

实验研究了在水平放置的低高宽比聚二甲基硅氧烷(polydimethylsiloxane,PDMS)微槽道(300μm×60μm)内的局部位置给予恒定热流密度条件下气泡的核化沸腾、生长和运动情况,实验中的工质采用FC-72,并用真空泵抽至室温下的饱和气压。研究发现微通道内起始沸腾需要比常规槽道更大的壁面过热度,液体流量和加热速率对气泡的生长和运动有很大的影响。     

小尺寸矩形槽道内气泡生长及运动特性

通过实验研究了液体流动条件下小尺寸矩形槽道底部由微孔注入的气泡生长及运动特性。结合RCD算法与形心提取算法,有效地跟踪了气泡生长及运动轨迹。实验结果表明:气泡的形成过程可分为生长和涌入两个阶段;随着气体流量的增大,后续小气泡的涌入加强,涌入持续时间更长,气泡形成时间增加,等待时间缩短;槽道中小气泡的堆积现象随气体流量的增大而愈加明显。     

基于MPS方法的汽泡凝结数值模拟研究

采用移动粒子半隐式(MPS)方法对静止过冷水中单个汽泡的凝结现象进行了数值模拟,研究了不同初始压力和初始直径时饱和蒸汽汽泡凝结过程,获得了凝结过程中汽泡形状、当量直径和压力的变化规律;汽泡初始压力为0.1～0.5MPa,初始直径为2mm、3mm和5mm;过冷水压力为0.1MPa,温度为70℃。结果表明两相界面不存在压差时,凝结过程中汽泡始终保持球形,汽泡当量直径逐渐减小,压力近似不变;相界面存在压差时,凝结过程中汽泡从球形逐渐变为心形、半月形,汽泡当量直径和压力会出现周期性振荡,且初始压力越大振荡幅度越大。     

Uniformly convergent C 0‐nonconforming triangular prism element for fourth‐order elliptic singular perturbation problem

In this article, we introduce a C ⁰‐nonconforming triangular prism element for the fourth‐order elliptic singular perturbation problem in three dimensions by using the bubble functions. The element is proved to be convergent in the energy norm uniformly with respect to the perturbation parameter. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 30: 1785–1796, 2014