Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.     

Determinaton of Three Kinds of Organic Acids in the Leaves of Elaeagnus angustifolia L. from Different Regions and Different Growth Stages in Xinjiang Province by Using High-Performance Thin-Layer Chromatography

JPC – Journal of Planar Chromatography – Modern TLC - High-performance thin-layer chromatography, which is a quick qualitative and quantitative method, was used to determine 3 kinds of...     

The catalytic performance study of polymerized ionic liquid synthesized in different conditions on alkylation of o‐Xylene with styrene

In this work, a series of novel acidic polymerized ionic liquids were used as heterogeneous catalyst for alkylation of o‐Xylene with styrene. And the effect of the amount of initiator and the type of acid used for ion exchange on catalyst structure and the catalytic performance of catalysts for alkylation were studied thoroughly. The experiment results show: when the percentage of the amount of initiator in the total material is 3%, the polymerized ionic liquid catalyst MPM‐SO₃H‐[C₃V][SO₃CF₃] has the most uniform with a specific surface area of 97.30 m²/g and a pore volume of 0.35 cm³/g. Benefiting from the unique structure features, MPM‐SO₃H‐[C₃V][SO₃CF₃] manifested an excellent catalytic performance for alkylation of o‐Xylene with styrene, along with the conversion of styrene was 96.8% and the yield of 1‐Phenyl‐1‐ortho‐xylene ethane was 94.7%. Therefore, this work provides a novel reference to the synthesis of polymerized ionic liquids and clearly explains the advantage of novel acidic polymerized ionic liquids on alkylation.     

On s-hamiltonian line graphs of claw-free graphs

For an integer $s\ge 0$, a graph $G$ is $s$-hamiltonian if for any vertex subset $S?V\left(G\right)$ with $\left|S\right|\le s$, $G?S$ is hamiltonian, and $G$ is $s$-hamiltonian connected if for any vertex subset $S?V\left(G\right)$ with $\left|S\right|\le s$, $G?S$ is hamiltonian connected. Thomassen in 1984 conjectured that every 4-connected line graph is hamiltonian (see Thomassen, 1986), and Ku?zel and Xiong in 2004 conjectured that every 4-connected line graph is hamiltonian connected (see Ryjá?ek and Vrána, 2011). In Broersma and Veldman (1987), Broersma and Veldman raised the characterization problem of $s$-hamiltonian line graphs. In Lai and Shao (2013), it is conjectured that for $s\ge 2$, a line graph $L\left(G\right)$ is $s$-hamiltonian if and only if $L\left(G\right)$ is $(s+2)$-connected. In this paper we prove the following.(i) For an integer $s\ge 2$, the line graph $L\left(G\right)$ of a claw-free graph $G$ is $s$-hamiltonian if and only if $L\left(G\right)$ is $(s+2)$-connected.(ii) The line graph $L\left(G\right)$ of a claw-free graph $G$ is 1-hamiltonian connected if and only if $L\left(G\right)$ is 4-connected.     

Crystal structures of silicon-rich lithium silicides at high pressure

Silicon (Si) is one of the most essential elements, as it is indispensable for modern electronic technology. The standard Si structure at ambient conditions is the cubic diamond structure, and it has an indirect band gap, which prevents it from being considered as a next-generation platform for semiconductor technologies. Therefore, the search for new allotropes of silicon has attracted great attention. Herein, first principles swarm-intelligence structure searches coupled with density-functional theory were performed to explore the stable high-pressure phases of silicon-rich lithium containing compounds, LiSi_x ($x=4\text{–}8$). The LiSi₄ stoichiometry was predicted to be stable, and it was found to assume one of the following space groups, P4/mnc, Cmmm, and C2/m within the pressure range of 0 to 50 GPa. By removing the Li atoms from these compounds, three silicon allotropes were obtained that were metastable at ambient pressures. Our work illustrates how novel silicon allotropes can be predicted using the CALYPSO method.     

Efficient Syntheses of Traumatic Lactone and Rhizobialide

Herein, we report the total synthesis of traumatic lactone and rhizobialide by utilizing allenoic acid to construct the lactone ring. The key starting materials, allenoic acids, could be prepared by the ATA (allenation of terminal alkynes) of a terminal alkyne with an aldehyde that contained a protected hydroxyl group followed by hydrolysis. Importantly, the asymmetric synthesis could be realized just by replacing racemic diphenylprinol with (R)- or (S)-diphenylprinol to deliver the optically active allenoate.     

Photo-deposition of ZnO/Co3O4 core-shell nanorods with p-n junction for efficient oxygen evolution reaction

Journal of Solid State Electrochemistry - Co3O4 has attracted extensive interests as a non-noble-metal electrocatalyst of oxygen evolution reaction, which is critical to many electrical energy...     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21 – 23 , Cz-4 , and Cz-5 , have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand–metal–ligand bite angles of 166–170°, which are larger than the typical bite angle of 153–155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m⁻² due to efficiency roll-off.     

Shape morphing and topology optimization of fluid channels by explicit boundary tracking

An integrated shape morphing and topology optimization approach based on the deformable simplicial complex methodology is developed to address Stokes and Navier‐Stokes flow problems. The optimized geometry is interpreted by a set of piecewise linear curves embedded in a well‐formed triangular mesh, resulting in a physically well‐defined interface between fluid and impermeable regions. The shape evolution is realized by deforming the curves while maintaining a high‐quality mesh through adaption of the mesh near the structural boundary, rather than performing global remeshing. Topological changes are allowed through hole merging or splitting of islands. The finite element discretization used provides smooth and stable optimized boundaries for simple energy dissipation objectives. However, for more advanced problems, boundary oscillations are observed due to conflicts between the objective function and the minimum length scale imposed by the meshing algorithm. A surface regularization scheme is introduced to circumvent this issue, which is specifically tailored for the deformable simplicial complex approach. In contrast to other filter‐based regularization techniques, the scheme does not introduce additional control variables, and at the same time, it is based on a rigorous sensitivity analysis. Several numerical examples are presented to demonstrate the applicability of the approach.