Synthesis and Characterization of Amphiphilic Copolymer Acrylic Acid-co-p-Chloromethylstyrene

The free radical copolymerization of acrylic acid (M₁) with p-chloromethylstyrene (M₂) in dioxane and in the presence of α,α′-azobisisobutyronitrile (AIBN) at 65°C is reported. Copolymer compositions of six copolymer samples obtained from feed ratios of M₁:M₂ = 95.2:4.8 to 21.4:78.6 were determined by ¹H-NMR. The reactivity ratios of AA/p-CMS copolymerization system calculated by the F-R method were r ₁ = 0.50 ± 0.06 and r ₂ = 1.52 ± 0.15, almost the same as r ₁ = 0.43 ± 0.21 and r ₂ = 1.31 ± 0.14 by the extended K-T method. On the basis of the reactivity ratios of two monomers, the sequence length distribution in the AA/p-CMS copolymers was obtained. For f₂ = 4.77%, the monomer unit of p-CMS is individually separated in the chain of AA; for f₂ = 35.53%, the alternating tendency prevails and a large number of mono-sequences are formed. The number-average ( _n) and weight-average ( _w) molecular weights were determined by gel permeation chromatography. The effect on molecular weights of feed composition is also discussed. In the presence of constant initiator concentration, the gradual increase in the ratio of M₂:M₁ (from14.7:85.3 to 78.6:21.4) was accompanied by a decrease in molecular weights ( _n from 11907 to 3961).     

U6 is unsuitable for normalization of serum miRNA levels in patients with sepsis or liver fibrosis

MicroRNA (miRNA) levels in serum have recently emerged as potential novel biomarkers for various diseases. miRNAs are routinely measured by standard quantitative real-time PCR (qPCR); however, the high sensitivity of qPCR demands appropriate normalization to correct for nonbiological variation. Presently, RNU6B (U6) is used for data normalization of circulating miRNAs in many studies. However, it was suggested that serum levels of U6 themselves might differ between individuals. Therefore, no consensus has been reached on the best normalization strategy in ‘circulating miRNA''. We analyzed U6 levels as well as levels of spiked-in SV40-RNA in sera of 44 healthy volunteers, 203 intensive care unit patients and 64 patients with liver fibrosis. Levels of U6 demonstrated a high variability in sera of healthy donors, patients with critical illness and liver fibrosis. This high variability could also be confirmed in sera of mice after the cecal ligation and puncture procedure. Most importantly, levels of circulating U6 were significantly upregulated in sera of patients with critical illness and sepsis compared with controls and correlated with established markers of inflammation. In patients with liver fibrosis, U6 levels were significantly downregulated. In contrast, levels of spiked-in SV40 displayed a significantly higher stability both in human cohorts (healthy, critical illness, liver fibrosis) and in mice. Thus, we conclude that U6 levels in the serum are dysregulated in a disease-specific manner. Therefore, U6 should not be used for data normalization of circulating miRNAs in inflammatory diseases and previous studies using this approach should be interpreted with caution. Further studies are warranted to identify specific regulatory processes of U6 levels in sepsis and liver fibrosis.     

Magnesium boride sintered as high-energy fuel

Boron was chosen as fuel owing to its excellent thermodynamic values for combustion. The difficulty of the boron in combustion is the formation of a surface oxide layer, which postpones the combustion process, reducing the performance of the rocket engine. In this paper, magnesium boride was sintered as high-energy fuel as a substitute for boron. The combustion heat and efficiency of magnesium boride and boron were determined using oxygen bomb calorimeter. The combustion characteristics of magnesium boride were investigated by thermal analysis, chemical analysis, XRD, and EDS. Results show that the combustion performance of magnesium boride are better than that of amorphous boron in oxygenated environments. The evaporation of magnesium in magnesium boride combustion process prevent the formation of a closed oxide layer, leading to higher combustion efficiency.     

Study on thermodynamic properties of glyphosate by oxygen-bomb calorimeter and DSC

The combustion enthalpy of glyphosate was determined by XRY-1C oxygen-bomb calorimeter at a constant volume. The standard mole combustion enthalpy and the standard mole formation enthalpy have been calculated to be ?1702.19 and ?1478.36 kJ mol^?1, respectively. For testing the reliability of instrument, glycine and naphthalene were used as reference materials by comparing the measured values with the literature values, the absolute error and relative error are 2.58 kJ mol^?1 and 0.26 % for glycine, respectively, and these of naphthalene are 4.08 kJ mol^?1 and 0.08 %, respectively. Moreover, the constant-pressure heat capacities c _p of glyphosate were measured by differential scanning calorimetry in the temperature range 303.15–365.15 K, and the relationship between c _p and temperature was established. These related studies can provide a thermodynamic basis for their further application.     

Application of thermovision for estimation of the optimal and safe parameters of the whole body cryotherapy

Exposure to the extreme low temperatures, ranging between ?60 and ?140 °C, has many beneficial effects on the human body what is exploited for example in sport medicine, for treatment of locomotory system diseases or even some psychiatric disorders. To insure the safe treatment in a cryochamber, careful planning of the procedure and proper qualification of patients, is required. Cardiovascular system, especially skin vasculature plays the major role of the body response to the extreme cold. The changes in skin blood flow are reflected in changes of the temperature distribution. Therefore, the thermal imaging, which allows to analyze the temperature distribution on the human body, may be successfully exploited to examine the influence of extremely low temperatures on the skin vascular system. The aim of this work was to examine the temperature, blood pressure, and heart rate changes after the whole body cryotherapy in healthy subjects to determine the safety conditions of the treatment. 480 healthy students of the Wroc?aw University School of Physical Education were divided into two groups (each 240 persons). All subjects were exposed for 1–3 min to the extremely low temperatures: ?60, ?100, ?120, and ?140 °C. In one group, the thermograms were recorded before and 5 and 30 min after the cryotherapy by means of ThermoVision A20 M thermal camera. In the other one, heart rate and blood pressure were measured before and 5 min after the cryotherapy. It was demonstrated that 3-min exposure in the cryochamber and the temperature ?120 °C are the optimal and safe cryotherapy parameters.     

Investigation of binuclear metal phthalocyanines as electrocatalysts for Li/SOCl<Subscript>2</Subscript> battery

Three novel series of the binuclear metal phthalocyanines M₂Pc₂, M₂Pc₂Hc, and M₂Nc₂ (M?=?Mn(II), Fe(II), Co(II), Ni(II), and Cu(II)) were synthesized and characterized. The electrocatalytic performance of the binuclear compounds to lithium–thionyl chloride battery was evaluated by operating these compounds in the electrolyte of the battery. The results indicated that the binuclear metal phthalocyanines improved the capacity of the battery by an increase of approximately 30–58 %. Of all, Cu₂Pc₂Hc and Fe₂Nc₂ displayed the highest increments of 56 and 57 %, respectively.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Random Copolymers of 1,5-Dioxepan-2-one

ABSTRACT

Copolymers of 1,5-dioxepan-2-one (DXO) and e-caprolactone (?-CL), δ-valerolactone (δ-VL) or L-lactide (LLA) have been synthesized and characterized. High molecular weight copolymers were obtained using stannous-2-ethyl hexanoate as catalyst in bulk. Reactivity ratios for the copolymerization of DXO and δ-VL were determined at 110°C as r_VL=0.5 and r_DXO=2.3. At high conversion, depolymerization of δ-VL occurred, resulting in lower molecular weight and variations in the copolymer composition.

Physical properties, such as crystallinity and melting temperature of the DXO-copolymers proved to be strongly dependent on the choice of comonomer and on the molar composition of the copolymers. DXO appears to be incorporated into the poly-?-caprolactone (PCL) crystals and to some extent into the poly-δ-valerolactone (PVL) crystals, resulting in a more gradual decrease in crystallinity with increasing amount of DXO.     

Grafting of 4‐Vinyl Pyridine onto Nylon‐6 Initiated by Cu(III)

In this article, the graft copolymerization of 4‐vinyl pyridine (4VP) onto nylon‐6 (PA6) using potassium diperiodacuprate (III) (DPC)–PA6 redox system as initiator is investigated in an alkaline medium. The structure and the properties of graft copolymer are confirmed by Fourier transfer infrared spectroscopy (IR), X‐ray diffraction and thermogravimetric analysis (TGA). The mechanism is proposed to explain the generation of radicals and the initiation. The effects of reaction variables, such as the initiator concentration, ratio of 4VP to PA6, pH, as well as reaction temperature and time are investigated. Graft copolymers with high grafting efficiency (>95%) were obtained, which indicated that the DPC–PA6 redox system was an efficient initiator for this graft copolymerization. The quaternized PA6‐g‐P4VP (QPAVP) is proven to be an excellent adsorbent to heavy metal ions.