Microscopic phenomena found within enclosed surface laser ablation of 20 nm thick aluminium films

This paper investigates the microscopic features which occur when a four-layered film is ablated using Q-switched Nd:YAG laser. The four-layered films consist of a vacuum-deposited aluminium layer (0.02 μm) upon an oriented polypropylene (OPP) film (30 μm) which has been laminated using an inert adhesive and a second OPP film. Laser radiation is absorbed principally by the aluminium layer, melting and/or vaporising it. Upon cooling, the aluminium layer is rearranged into discrete microscopic particles, which give laser-treated areas of the film a transparent appearance. Within the films are found microscopic features, which can be divided into three distinct types: aluminium demetallisation features, polymer distortion features and particle features. Features from each of these categories can exist within a single laser track depending upon the laser parameters used for transparentisation.     

利用TEM对Si基片与MgO基片上生长的薄膜特性的研究

对生长在Si和MgO单晶基片上的不同厚度的单层NbN薄膜、双层薄膜AlN/NbN以及三层薄膜NbN/AlN/NbN应用透射电子显微镜(Transmission Electron Microscope,TEM)技术进行了分析研究,对这几种薄膜样品的微观结构、薄膜厚度以及各个边界的一些直观细节给出了较为清晰的图像。由透射电子显微镜的电子衍射图案计算了薄膜和单晶衬底的晶格常数,并与我们以前采用X射线衍射技术分析的结果进行了比较,结果有很好的吻合。     

折射率色散效应对晶体硅太阳电池反射率的影响

为了分析色散效应对晶体硅太阳电池反射率的影响，在考虑材料折射率色散效应的情况下，运用光学干涉矩阵计算了具有SiO2单层减反射膜和MgF2/ZnS双层减反射膜晶体硅太阳电池的反射率与波长的函数关系，并与实验结果和未考虑色散效应的计算结果进行了对比分析.结果表明：考虑折射率色散效应的计算结果与实验测量数据完全相符，而未考虑折射率色散效应的计算结果与实验测量数据相差较大，最大差值分别为21.5％和16.9％.     

Effect of film thickness on interface and electric properties of BiFeO3 thin films

Bismuth ferrite (BFO) thin films were fabricated by RF-magnetron sputtering deposition method on Pt/Ti/SiO₂/Si(1 0 0) substrate. The effect of the thickness of BFO films varying from 85 to 280 nm on electrical properties was investigated. Saturated coercive fields were found to increase with the BFO film thickness. The dielectric constant of BFO thin films measured at 1 kHz decreased with decreasing thickness from 98 to 86, while tangent losses increased from 0.013 to 0.021. The presence of bismuth oxide at the interface between BFO films and Pt bottom electrodes was responsible for the high leakage currents in thin BFO thin films as was demonstrated by X-ray diffraction, grazing-incident X-ray diffraction, and secondary ion mass spectroscopy analysis.     

Growth of Pt thin films on WSe2

The morphology and structure of Pt deposited on a WSe₂(0 0 0 1) van der Waals surface have been investigated by reflection high energy electron diffraction and scanning tunneling microscopy. At room temperature, the initial growth is characterized by the formation of three-dimensional fcc Pt islands with (1 1 1) orientation. In contrast, at higher temperatures of about 450 °C the formation of a novel chemically ordered Pt-Se alloy is observed. Based on the diffraction patterns, a tetragonal DO₂₂-type structure of a Pt₃Se compound is suggested. With increasing Pt thickness, this chemically ordered alloy disappears and an additional superstructure occurs, which is accompanied by the coalescence of the islands. The observed superstructure is attributed to a strong Se diffusion towards the growth surface, forming most likely a PtSe₂ alloy with the CdI₂-type layered structure on the top surface. Due to the lateral lattice mismatch between the Pt(1 1 1) layers and the PtSe₂(1 1 1) top layer, a Moiré pattern with a period of 1.1 nm is created, which might be used as a long-range atomic pattern for further nanostructure growth.     

Properties of mixed protein/surfactant adsorption layers

The adsorption isotherms, adsorption kinetics and surface rheological properties of β-lactoglobulin, β-casein, in the absence and presence of Tween 20 were measured. To study the adsorption process (isotherms and kinetics) at the water–air interface the pendant drop technique (axial drop shape analysis, ADSA), and ring tensiometry were used. The surface shear rheological parameters were measured with a torsion pendulum set-up. Also, data of the equilibrium film thickness and surface diffusion coefficients obtained from fluorescence recovery after photobleaching (FRAP) measurements are used to understand the competitive adsorption mechanism. The adsorption process and shear rheological behaviour of the studied systems show a rather complex behaviour which depends most of all on the system's composition. At high protein or surfactant content the behaviour is controlled by the main component while for the more mixed systems the adsorption process is complex and consists of partial adsorption, surfactant–protein interaction and protein rearrangement as a function of surface coverage. The results obtained illustrate that all these processes must be taken into account in future new theoretical models to be derived for such systems.     

Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxysilane on low carbon steel surfaces

The film forming kinetics and reaction mechanism of γ-GPS on low carbon steel surfaces was investigated by FTIR-ATR, AFM, NSS and theoretical calculation method. The results from experimental section indicated that the reaction of γ-GPS on low carbon steel surfaces followed the conventional reaction mechanism, which can be described as reaction (I) (Me (Metal)-OH + HO-Si → Me-O-Si + H₂O) and reaction (II) (Si-OH + Si-OH → Si-O-Si + H₂O). During film forming process, the formation of Si-O-Fe bond (reaction (I)) exhibited oscillatory phenomenon, the condensation degree of silanol monomers (reaction (II)) increased continuously. The metal hydroxyl density had significant influence on the growth mechanisms and corrosion resisting property of γ-GPS films. The results from theoretical calculation section indicated that the patterns of reaction (I) and reaction (II) were similar, involving a nucleophilic attack on the silicon center. The formation of Si-O-Fe bond (reaction (I)) was kinetically and thermodynamically preferred, which had catalytic effect on its condensation with neighboring silanol monomers (reaction (II)). Our DFT calculations were good consistent with the experimental measurements.     

Segmented gas–liquid flow characterization in rectangular microchannels

We used optical methods such as Laser Induced Fluorescence (LIF) and confocal Laser Scanning Microscopy (LSM) to characterize gas–liquid phase distribution in rectangular microchannels. Using a 2 m long microchannel with a hydraulic diameter of 200 μm enables the precise measurement of important parameters such as liquid slug length, bubble length, pressure drop and film thickness at the wall as well as in the corner of the microchannel for low Capillary numbers (Ca) ranging from 2 × 10⁻⁴ to 1 × 10⁻². This range of Ca was obtained by using different fluid pairs such as ethanol, water and different concentrated aqueous solutions of glycerol in combination with nitrogen.     

同位镀铋膜电极测定爆米花中的痕量铅

采用同位镀铋膜法修饰铂电极,用差分脉冲溶出伏安法对爆米花中痕置铅进行了测定,并优化了实验条件.在优化的实验条件下,分别对2.0×10<'8>-6.0×10<'-7>mol/L和6.0×10<'-7>-1.0×10<'-4>mol/L的pb<'2+>进行了测定,Pb<'2+>溶出峰电流与Pb<'2+>浓度呈良好的线性关系...