Dy(ClO_4)_3·3H_2O-18C6-CH_3CN体系的相平衡及其固体配合物的合成

近年来稀土冠醚配合物的研究受到广泛重视,但稀土高氯酸盐冠醚配合物的研究报道较少。高氯酸镝与冠醚18C6的配合物尚未见报道。我们利用半微量相平衡方法研究了Dy(ClO_4)_3·3H_2O-18C6-CH_3CN三元体系在15℃时的溶解度。同时制得了固态配合物,用化学分析及物理化学方法研究了配合物的组成和性质。     

Potential energy curves for the X1∑ g, B1△g and B''''1∑ g states of C2 using MRCI and approximate CI methods

The potential energy curves for the X1∑ g, B1△g and B′1∑ g states of C2 have been studied by using MRCI and approximate CI methods, and are benchmarked against the calculations of full configuration interaction (FCI). The results obtained by MRCI method agree with the FCI very well, and even are accurate enough to compare other approximate methods as benchmark, when the calculations of FCI are not feasible. The approximate CI methods mentioned in this paper are reliable for treating chemical problems.     

Influence of the Size of Aromatic Chelate Ligands on the Structures of Cadmium(II) Tetracarboxylates Polymers: From 2D Layered Network to 3D Metal‐Organic Framework

To determine the influence of the size of the aromatic chelate ligands on the frameworks of metal tretracarboxylate polymers, two new coordination polymers [Cd(btc)_0.5 (2,2′‐bpy)] ( 1 ) and [Cd(btc)_0.5(phen)]·H₂O ( 2 ) (H₄btc = biphenyl‐3,3′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized under similar hydrothermal conditions. In complex 1 , the dimeric Cd₂ units are linked by bridging btc^4? ligand to form a 2D layered network, whereas complex 2 possesses a 3D metal‐organic framework consisting of the dimeric Cd₂ units. The differences of two metal‐organic frameworks demonstrate that the size of the rigid aromatic chelate ligands have an important effect on the structures of their complexes. Additionally, the two complexes show strong fluorescence in the solid state at room temperature.     

Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.     

四元交互体系Li+, Mg2+/SO42-, B4O72-—H2O25℃溶解度和溶液物化性质的研究

研究了Li⁺,Mg²+/SO₄^2-,B₄O₇^2-—H₂O四元交互体系25℃时的溶解度和溶液的密度及折光率.四种原始组份未发生脱水作用,体系中也没有复盐或固溶体形成.体系25℃溶解度等温线由五段组成,有四个结晶区,分别对应于四种原始组份,其中以MgB₄O₇·9H₂O的结晶区最大.溶解度等温线上有两个零变量点,其一为MgB₄O₇·9H₂O,MgSO₄·7H₂O,Li₂SO₄·H₂O三盐共饱点,另一为MgB₄O₇·9H₂O,Li₂B₄O₇·3H₂O,Li₂SO₄·H₂O三盐不相称共饱点.     

Chemiluminescence of Peracetic Acid in Alkaline Medium and its Application to Dihydralazine Sulfate Determination

The chemiluminescence (CL) of peracetic acid (PAA) in alkaline medium is very weak but is strongly enhanced after the addition of dihydralazine sulfate (DHZS). Based on this phenomenon, a simple, rapid and highly sensitive flow-injection CL method for the determination of DHZS was developed. The CL emission was linearly related to the DHZS concentration in the range of 20–4000 ng mL⁻¹ with a detection limit (3σ) of 1.2 ng mL⁻¹. As a preliminary application, the proposed method was successfully applied to the determination of DHZS in pharmaceutical preparations; the recovery of DHZS in human urine was between 96.5% and 102.2%. A detailed CL mechanism was proposed and singlet molecular oxygen (¹O₂) was suggested to be produced in the CL reaction process.     

Determination of norfloxacin in pharmaceuticals,human serum,and urine using a luminol—dissolved oxygen chemiluminescence system

A sensitive chemiluminescence method, based on the enhancive effect of norfloxacin on the reaction between luminol and dissolved oxygen in a flow injection system, was proposed for the determination of norfloxacin. The increment of the chemiluminiscence intensity was proportional to the concentration of norfloxacin, giving a calibration graph linear over the concentration from 0.4 ng mL⁻¹ to 400.0 ng mL⁻¹ (r ² = 0.9988) with the detection limit of 0.1 ng mL⁻¹ (3 × σ _noise). At the flow rate of 2.0 mL min⁻¹, a complete determination of norfloxacin, including sampling and washing, could be accomplished in 30 s with the relative standard deviation lower than 3.0 %. The proposed method was applied successfully to determine norfloxacin in pharmaceuticals, human urine, and serum. Possible mechanism of the reaction was also discussed.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

[Ce(NO3)5H2O]·(C3H5N2)2的合成、晶体结构及热分析

Colorless crystal, [Ce(NO₃)₅H₂O]·(C₃N₂H₅)₂, has been obtained from the reaction of Ce(NO₃)₃ with imdazole in the aqueous solution and its crystal structure has been determined by single crystal X-ray diffraction techniques.The crystal belongs to triclinic, space group P1. The cell parameters are: a = 0.7489(1) um, b = 0.7914(2) nm, c = 1.8139(3) nm, a = 89.39(2)°, β = 89.37(l) °,γ = 63.18(2)°, Dc = 2.1g·cm^-3, Z = 2, R = 0.0319.In the compound, all of five nitrates are bidentate and one molecule of water is monodentate, the coordination number of Ce (Ⅲ) is 11.The processes of thermal decomposition of the compound was proposed by its TGcurve.